欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 2018, Vol. 24 ›› Issue (1): 28-35.  doi: 10.13208/j.electrochem.170443

• 电镀与表面精饰近期研究专辑( 哈尔滨工业大学 安茂忠教授主编) • 上一篇    下一篇

水热法制备铝合金超疏水表面及电化学性能研究

陈晓航,陈寞静,闵宇霖,徐群杰*   

  1. 上海市电力材料防护与新材料重点实验室,上海热交换系统节能工程技术研究中心,上海电力学院,上海200090
  • 收稿日期:2017-04-17 修回日期:2017-05-11 出版日期:2018-02-28 发布日期:2017-05-12
  • 通讯作者: 徐群杰 E-mail:xuqunjie@shiep.edu.cn
  • 基金资助:

    国家自然科学基金项目(No. 21673135)资助

Superhydrophobic Surface on Aluminum Alloy by Hydrothermal Method and Its Electrochemical Performance

CHEN Xiao-hang, CHEN Mo-jing, MIN Yu-lin, XU Qun-jie*   

  1. Key Laboratory of Shanghai Colleges and Universities for Corrosion Control in Electric Power System and Applied Electrochemistry, Shanghai Engineering Research Center of Energy-Saving in Heat Exchange Systems, Shanghai University of Electric Power, Shanghai 200090, China
  • Received:2017-04-17 Revised:2017-05-11 Published:2018-02-28 Online:2017-05-12
  • Contact: XU Qun-jie E-mail:xuqunjie@shiep.edu.cn

摘要:

在金属表面构建超疏水膜层是一种有效的防腐技术,本文采用水热处理和自组装技术在铝合金表面构建了超疏水膜层来提升铝合金的耐蚀性能. 通过对不同水热时间下制备的铝合金超疏水表面的电化学性能以及表面形貌进行测试分析,发现当水热反应时间为6 h时,制备的超疏水铝合金超疏水性和电化学性能达到最佳,接触角能达到155.5o,在模拟海水溶液中保护效率能达到99.6%.

关键词: 超疏水, 铝合金, 电化学, 腐蚀, 水热法

Abstract:

Superhydrophobic film formed on a metal surface is an effective way for corrosion protection. In this paper, the superhydrophobic film was prepared on the surfaces of aluminum alloy by hydrothermally treating with a solution containing CeCl3·7H2O and CO(NH2)2 , and a self-assemble process. The electrochemical measurements and surface morphology results confirmed that the best superhydrophobicity and electrochemical performance could be achieved with the contact angle of 155.5o after six hours of hydrothermal reaction. Furthermore, the inhibition efficiency of 99.6% was obtained in 3.5 wt% NaCl aqueous solution, indicating the excellent corrosion resistance of superhydrophobic film.

Key words: superhydrophobic, aluminum, electrochemistry, corrosion inhibition, hydrothermal method

中图分类号: