一步固相法合成锂离子电池高镍层状正极材料

doi:10.13208/j.electrochem.211213

摘要/Abstract

摘要：

高镍层状正极材料因其比容量高进而满足电动汽车的续航要求,是锂离子电池中占主导地位的正极材料之一。通常,商业化的高镍层状氧化物是由共沉淀前驱体合成的,而在共沉淀过程中需要对温度、 pH、搅拌速率等条件的精确控制,以确保镍、钴和锰等阳离子的原子级混合。本文采用了简单的一步固相法成功合成了超高镍含量的层状氧化物材料。通过使用与目标产物具有相似层状结构的前驱体氢氧化镍,成功合成了LiNiO₂和LiNi_xCo_yO₂ (x = 0.85, 0.9, 0.95; x + y = 1),其电化学性能可与共沉淀前驱体制备的高镍材料相媲美。通过XRD和XPS测试证实了Co掺杂到LiNiO₂中,并抑制了高镍氧化物中的锂镍混排。掺杂剂Co在提高高镍材料的放电容量、倍率性能和循环性能方面具有明显的优势。一步固相法为未来制备下一代高性能超高镍锂离子正极材料提供了一种简单有效制备方法。

关键词: 锂离子电池, 高镍层状氧化物, 一步固相法, 镍酸锂

Abstract:

Nickel-rich layered oxide is one of the dominate cathode materials in the lithium ion batteries, due to its high specific energy density meeting the range requirement of the electric vehicles. Typically, the commercial Ni-rich layered oxides are synthesized from co-precipitated precursors, while precision control is required in the co-precipitation process to ensure the atomic level mixing of the cations such as Ni, Co and Mn, et.al. In this work, a one-step solid-state method was successfully applied to synthesize the Ni-rich layered oxide materials with ultra-high Ni content. By choosing the nickel hydroxides as the precursor with layered structure similar to the targeting product, we successfully synthesized LiNiO₂ (LNO) and LiNi_xCo_yO₂(x = 0.85, 0.9, 0.95; x + y = 1) with the electrochemical performance comparable to NCM prepared from precipitated precursors. It was confirmed by XRD and XPS that Co is doped into LNO and suppresses the Li⁺/Ni²⁺ mixing in Ni-rich oxides. The Co dopant exhibits a noticeable advantage in improving the discharge capacity, rate performance and cycle performance. This work provides some perspective that the one-step solid-state method is a promising approach to prepare high-energy ultrahigh-Ni layered oxide cathodes.

Key words: lithium-ion batteries, Ni-rich layered oxides, one-step solid-state method, LiNiO₂

王京玥, 王睿, 王诗琦, 王立帆, 詹纯. 一步固相法合成锂离子电池高镍层状正极材料[J]. 电化学（中英文）, 2022, 28(8): 2112131.

Jing-Yue Wang, Rui Wang, Shi-Qi Wang, Li-Fan Wang, Chun Zhan. Facile One-Step Solid-State Synthesis of Ni-Rich Layered Oxide Cathodes for Lithium-Ion Batteries[J]. Journal of Electrochemistry, 2022, 28(8): 2112131.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.13208/j.electrochem.211213

https://electrochem.xmu.edu.cn/CN/Y2022/V28/I8/2112131

图/表 13

参考文献 36

[1]	Liu Y Y, Zhu Y Y, Cui Y. Challenges and opportunities towards fast-charging battery materials[J]. Nat. Energy, 2019, 4(7): 540-550. doi: 10.1038/s41560-019-0405-3 URL
[2]	Cano Z P, Banham D, Ye S Y, Hintennach A, Lu J, Fowler M, Chen Z W. Batteries and fuel cells for emerging electric vehicle markets[J]. Nat. Energy, 2018, 3(4): 279-289.
[3]	Goodenough J B, Kim Y. Challenges for rechargeable Li batteries[J]. Chem. Mater., 2010, 22(3): 587-603. doi: 10.1021/cm901452z URL
[4]	Liu A R, Zhang N, Stark J E, Arab P, Li H Y, Dahn J R. Synthesis of Co-free Ni-rich single crystal positive electrode materials for lithium ion batteries: Part I. two-step lithiation method for Al- or Mg-doped LiNiO₂[J]. J. Electrochem. Soc., 2021, 168(4): 040531. doi: 10.1149/1945-7111/abf7e8 URL
[5]	Bianchini M, Roca-Ayats M, Hartmann P, Brezesinski T, Janek J. There and back again- the journey of LiNiO₂ as a cathode active material[J]. Angew. Chem.-Int. Edit., 2019, 58(31): 10434-10458. doi: 10.1002/anie.201812472 URL
[6]	Myung S T, Maglia F, Park K J, Yoon C S, Lamp P, Kim S J, Sun Y K. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives[J]. ACS Energy Lett., 2017, 2(1): 196-223. doi: 10.1021/acsenergylett.6b00594 URL
[7]	Sun H H, Ryu H H, Kim U H, Weeks J A, Heller A, Sun Y K, Mullins C B. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes[J]. ACS Energy Lett., 2020, 5(4): 1136-1146. doi: 10.1021/acsenergylett.0c00191 URL
[8]	Zhang H L, Omenya F, Yan P F, Luo L L, Whittingham M S, Wang C M, Zhou G W. Rock-salt growth-induced (003) cracking in a layered positive electrode for Li-ion batteries[J]. ACS Energy Lett., 2017, 2(11): 2607-2615. doi: 10.1021/acsenergylett.7b00907 URL
[9]	Li H Y, Cormier M, Zhang N, Inglis J, Li J, Dahn J R. Is cobalt needed in Ni-rich positive electrode materials for lithium ion batteries?[J]. J. Electrochem. Soc., 2019, 166(4): A429-A439.
[10]	Cormier M M E, Zhang N, Liu A, Li H Y, Inglis J, Dahn J R. Impact of dopants (Al, Mg, Mn, Co) on the reactivity of Li_xNiO₂ with the electrolyte of Li-ion batteries[J]. J. Electrochem. Soc., 2019, 166(13): A2826-A2833.
[11]	Dahn J R, Fuller E W, Obrovac M, Vonsacken U. Thermal stability of Li_xCoO₂, Li_xNiO₂ and λ-MnO₂ and consequences for the safety of Li-ion cells[J]. Solid State Ion., 1994, 69(3-4): 265-270. doi: 10.1016/0167-2738(94)90415-4 URL
[12]	Shannon R D. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides[J]. Acta Crystallogr. Sect. A, 1976, 32(5): 751-767. doi: 10.1107/S0567739476001551 URL
[13]	Radin M D, Hy S, Sina M, Fang C C, Liu H D, Vinckeviciute J, Zhang M H, Whittingham M S, Meng Y S, Van der Ven A. Narrowing the gap between theoretical and practical capacities in Li-ion layered oxide cathode materials[J]. Adv. Energy Mater, 2017, 7(20): 1602888. doi: 10.1002/aenm.201602888 URL
[14]	Kim J, Lee H, Cha H, Yoon M, Park M, Cho J. Prospect and reality of Ni-rich cathode for commercialization[J]. Adv. Energy Mater, 2018, 8(6): 1702028. doi: 10.1002/aenm.201702028 URL
[15]	Delmas C, Pérès J P, Rougier A, Demourgues A, Weill F, Chadwick A, Broussely M, Perton F, Biensan P, Willmann P. On the behavior of the Li_xNiO₂ system: an electrochemical and structural overview[J]. J. Power Sources, 1997, 68(1): 120-125. doi: 10.1016/S0378-7753(97)02664-5 URL
[16]	Rougier A, Gravereau P, Delmas C. Optimization of the composition of the Li_1-_zNi₁₊_zO₂ electrode materials: structural, magnetic, and electrochemical studies[J]. J. Electro-chem. Soc., 1996, 143(4): 1168-1175. doi: 10.1149/1.1836614 URL
[17]	Liu A, Zhang N, Li H Y, Inglis J, Wang Y Q, Yin S, Wu H H, Dahn J R. Investigating the effects of magnesium doping in various Ni-rich positive electrode materials for lithium ion batteries[J]. J. Electrochem. Soc., 2019, 166(16): A4025-A4033.
[18]	Yoon C S, Choi M J, Jun D W, Zhang Q, Kaghazchi P, Kim K H, Sun Y K. Cation ordering of Zr-doped LiNiO₂ cathode for lithium-ion batteries[J]. Chem. Mater., 2018, 30(5): 1808-1814. doi: 10.1021/acs.chemmater.8b00619 URL
[19]	Mu L Q, Zhang R, Kan W H, Zhang Y, Li L X, Kuai C G, Zydlewski B, Rahman M M, Sun C J, Sainio S, Avdeev M, Nordlund D, Xin H L L, Lin F. Dopant distribution in Co-free high-energy layered cathode materials[J]. Chem. Mater., 2019, 31(23): 9769-9776. doi: 10.1021/acs.chemmater.9b03603 URL
[20]	Delmas C, Braconnier J J, Fouassier C, Hagenmuller P. Electrochemical intercalation of sodium in Na_xCoO₂ bronzes[J]. Solid State Ion., 1981, 3-4(8): 165-169.
[21]	Guilmard M, Rougier A, Grüne A, Croguennec L, Delmas C. Effects of aluminum on the structural and electrochemical properties of LiNiO₂[J]. J. Power Sources, 2003, 115(2): 305-314. doi: 10.1016/S0378-7753(03)00012-0 URL
[22]	Albrecht S, Kümpers J, Kruft M, Malcus S, Vogler C, Wahl M, Wohlfahrt-Mehrens M. Electrochemical and thermal behavior of aluminum- and magnesium-doped spherical lithium nickel cobalt mixed oxides Li_1-_x(Ni_1-_y_-_z-Co_yM_z)O₂ (M = Al, Mg)[J]. J. Power Sources, 2003, 119: 178-183.
[23]	Kim J, Cha H Y, Lee H Y, Oh P, Cho J H. Surface and interfacial chemistry in the nickel-rich cathode materials[J]. Batteries Supercaps, 2020, 3(4): 309-322. doi: 10.1002/batt.201900131 URL
[24]	Aricò A S, Bruce P, Scrosati B, Tarascon J M, van Scha-lkwijk W. Nanostructured materials for advanced energy conversion and storage devices[J]. Nat. Mater., 2005, 4(5): 366-377. doi: 10.1038/nmat1368 URL
[25]	Zheng L T, Bennett J C, Obrovac M N. All-dry synthesis of single crystal NMC cathode materials for Li-ion batteries[J]. J. Electrochem. Soc., 2020, 167(13): 130536. doi: 10.1149/1945-7111/abbcb1 URL
[26]	Ohzuku T, Ueda A, Nagayama M. Electrochemistry and structural chemistry of LiNiO₂ (Rm) for 4 volt secondary lithium cells[J]. J. Electrochem. Soc., 1993, 140(7): 1862-1870. doi: 10.1149/1.2220730 URL
[27]	Zhou F, Zhao X M, van Bommel A, Rowe A W, Dahn J R. Coprecipitation synthesis of Ni_xMn_1-_x(OH)₂ mixed hydroxides[J]. Chem. Mater., 2010, 22(3): 1015-1021. doi: 10.1021/cm9018309 URL
[28]	Kim Y, Kim D. Synthesis of high-density nickel cobalt aluminum hydroxide by continuous coprecipitation me-thod[J]. ACS Appl. Mater. Interfaces, 2012, 4(2): 586-589. doi: 10.1021/am201585z URL
[29]	Luo W B, Dahn J R. Preparation of Co_1-_zAl_z(OH)₂(NO₃)_z layered double hydroxides and Li(Co_1-_zAl_z)O₂[J]. Chem. Mater., 2009, 21(1): 56-62. doi: 10.1021/cm801627t URL
[30]	Zhao M Q, Zhang Q, Huang J Q, Wei F. Hierarchical nanocomposites derived from nanocarbons and layered double hydroxides-properties, synthesis, and applications[J]. Adv. Funct. Mater., 2012, 22(4): 675-694. doi: 10.1002/adfm.201102222 URL
[31]	Kanno R, Kubo H, Kawamoto Y, Kamiyama T, Izumi F, Takeda Y, Takano M. Phase relationship and lithium deintercalation in lithium nickel oxides[J]. J. Solid State Chem., 1994, 110(2): 216-225. doi: 10.1006/jssc.1994.1162 URL
[32]	Weigel T, Schipper F, Erickson E M, Susai F A, Markov-sky B, Aurbach D. Structural and electrochemical aspects of LiNi_0.8Co_0.1Mn_0.1O₂ cathode materials doped by various cations[J]. ACS Energy Lett., 2019, 4(2): 508-516. doi: 10.1021/acsenergylett.8b02302
[33]	Li W D, Erickson E M, Manthiram A. High-nickel layered oxide cathodes for lithium-based automotive batteries[J]. Nat. Energy., 2020, 5(1): 26-34. doi: 10.1038/s41560-019-0513-0 URL
[34]	Lee E J, Chen Z H, Noh H J, Nam S C, Kang S, Kim D H, Amine K, Sun Y K. Development of microstrain in aged lithium transition metal oxides[J]. Nano Lett., 2014, 14(8): 4873-4880. doi: 10.1021/nl5022859 URL
[35]	Li J, Harlow J, Stakheiko N, Zhang N, Paulsen J, Dahn J. Dependence of cell failure on cut-off voltage ranges and observation of kinetic hindrance in LiNi_0.8Co_0.15Al_0.05O₂[J]. J. Electrochem. Soc., 2018, 165(11): A2682-A2695.
[36]	Gilbert J A, Bareño J, Spila T, Trask S E, Miller D J, Polzin B J, Jansen A N, Abraham D P. Cycling behavior of NCM523/graphite lithium-ion cells in the 3-4.4 V range: diagnostic studies of full cells and harvested electrodes[J]. J. Electrochem. Soc., 2017, 164(1): A6054-A6065.

Sample	Chemical composition
Sample	Li	Ni	Co	Mn
NC85	0.99	0.88	0.13	-
NC90	0.93	0.98	0.09	-
NC95	1.01	0.94	0.05	-
LNO	0.97	1.03	-	-
NCM	0.97	0.93	0.05	0.05

Sample		NC85	NC90	NC95	LNO
3rd cycle	R_s(Ω)	2.6	7.6	8.7	4.4
	R_sf1(Ω)	31.3	30.8	15.9	50.9
	R_ct(Ω)	32.4	9.6	17.7	51.7
200th cycle	R_s(Ω)	10.1	3.3	16.3	10.3
	R_sf1(Ω)	40.2	54.2	79.2	62.8
	R_sf2(Ω)	42.0	53.5	111.5	56.9
	R_ct(Ω)	258.7	190	440.0	261.0