[1] Kim W C, Kim J G, Lee J Y, et al. Influence of Ca on the corrosion properties of magnesium for biomaterials[J]. Materials Letters, 2008, 62(25): 4146-4148.[2] Li Z, Gu X, Lou S, et al. The development of binary Mg-Ca alloys for use as biodegradable materials within bone[J]. Biomaterials, 2008, 29(10): 1329-1344.[3] Wan D, Wang J, Lin L, et al. Damping properties of Mg-Ca binary alloys[J]. Physica B: Condensed Matter, 2008, 403(13-16): 2438-2442.[4] Gu X N, Li N, Zhou W R, et al. Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy[J]. Acta Biomaterialia, 2011, 7(4): 1880-1889.[5] Liu C L, Wang Y J, Zeng R C, et al., In vitro corrosion degradation behaviour of Mg-Ca alloy in the presence of albumin[J]. Corrosion Science, 2010, 52(10): 3341-3347.[6] Haemers S, van der Leeden M C, Frens G. Coil dimensions of the mussel adhesive protein Mefp-1[J]. Biomaterials, 2005, 26(11): 1231-1236.[7] Waite J H. Adhesion a la moule[J]. Integrative and comparative biology, 2002, 42(6): 1172-1180.[8] Zhang F, Pan J, Claesson P M. Electrochemical and AFM studies of mussel adhesive protein (Mefp-1) as corrosion inhibitor for carbon steel[J]. Electrochimica Acta, 2011, 56(3): 1636-1645.[9] Zhang F, Pan J, Claesson P M, et al. Electrochemical, atomic force microscopy and infrared reflection absorption spectroscopy studies of pre-formed mussel adhesive protein films on carbon steel for corrosion protection[J]. Thin Solid Films, 2012, 520 (24): 7136-7143.[10] Harrington M J, Masic A, Holten-Andersen N, et al. Iron-clad fibers: A metal-based biological strategy for hard flexible coatings[J]. Science, 2010, 328(5975): 216-220.[11] Wei W, Yu J, Broomell C, et al. Hydrophobic enhancement of Dopa-mediated adhesion in a mussel foot protein[J]. Journal of the American Chemical Society, 2013, 135(1): 377-383.[12] Haemers S, Van der Leeden M C, Koper G J, et al. Cross-linking and multilayer adsorption of mussel adhesive proteins[J]. Langmuir, 2002, 18 (12): 4903-4907.[13] Haemers S, Van der Leeden M, Nijman E, et al. The degree of aggregation in solution controls the adsorbed amount of mussel adhesive proteins on a hydrophilic surface[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2001, 190(1): 193-203.[14] Haemers S, Koper G J, Frens G. Effect of oxidation rate on cross-linking of mussel adhesive proteins[J]. Biomacromolecules, 2003, 4(3): 632-640.[15] Hedlund J, Andersson M, Fant C, et al. Change of colloidal and surface properties of Mytilus edulis foot protein 1 in the presence of an oxidation (NaIO4) or a complex-binding (Cu2+) agent[J]. Biomacromolecules, 2009, 10(4): 845-849.[16] Jung J Y, Kwon S J, Han H S, et al. Rapid in vitro corrosion induced by crack-like pathway in biodegradable Mg-10% Ca alloy[J]. Microscopy and Microanalysis, 2013, 19(Suppl 5): 210-214.[17] Guo J B (郭京波), Tao Z Y (陶宗娅), Nuo X G (罗学刚). Analysis of Bamboo Lignin with FTIR and XPS[J]. Acta Chimica Sinica (化学学报), 2005, 63(16): 1536-1540.[18] Doraiswamy A, Narayan R, Cristescu R, et al. Laser processing of natural mussel adhesive protein thin films[J]. Materials Science and Engineering: C, 2007, 27(3): 409-413.[19] Nuo M (罗曼), Guan P (关平), Liu W H (刘文汇). The identification of several saturated fatty acids and their salts by means of infrared spectrometry [J]. Spectroscop y and Spectral Analysis(光谱学与光谱分析), 2007, 27(2): 250-253.[20] Fant C, Hedlund J, H??k F, et al. Investigation of adsorption and cross-linking of a mussel adhesive protein using attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR)[J]. The Journal of Adhesion, 2010, 86(1): 25-38.[21] Zhang F, Sababi M, Brinck T, et al. In situ investigations of Fe3+ induced complexation of adsorbed Mefp-1 protein film on iron substrate[J]. Journal of colloid and interface science, 2013, 404: 62-71.[22] Zvarec O, Purushotham S, Masic A, et al. Catechol-functionalized chitosan/iron oxide nanoparticle composite inspired by mussel thread coating and squid beak interfacial chemistry[J]. Langmuir, 2013, 29(34): 10899-10906.[23] Guo X W, Chang J W, He S M, et al. Investigation of corrosion behaviors of Mg–6Gd–3Y–0.4 Zr alloy in NaCl aqueous solutions[J]. Electrochimica Acta, 2007, 52(7): 2570-2579.[24] Poursaee A. Determining the appropriate scan rate to perform cyclic polarization test on the steel bars in concrete[J]. Electrochimica Acta, 2010, 55(3): 1200-1206.[25] Cai C, Zhang Z, Wei Z L, et al. Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl solution[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(4): 970-976.[26] Keera S, Deyab M. Effect of some organic surfactants on the electrochemical behaviour of carbon steel in formation water[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2005, 266(1): 129-140.[27] Ye C Q, Hu R G, Dong S G, et al. EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions[J]. Journal of Electroanalytical Chemistry, 2012, 688: 275-281. |