类超晶格结构：有序性传质赋予燃料电池高品质输出性能

doi:10.13208/j.electrochem.2215003

电化学（中英文） ›› 2023, Vol. 29 ›› Issue (1): 2215003. doi: 10.13208/j.electrochem.2215003

所属专题： “电催化和燃料电池”专题文章

类超晶格结构：有序性传质赋予燃料电池高品质输出性能

王健^a^,^#, 轩文辉^a^,^#, 何倩^a, 蒋金霞^a, 周圆圆^a, 聂瑶^b, 廖强^c, 邵敏华^d, 丁炜^a^,^*(), 魏子栋^a^,^*()

^a重庆大学化学化工学院，洁净能源与资源化工过程重庆市重点实验室，重庆 401331，中国
^b重庆师范大学化学学院，绿色合成与应用重庆市重点实验室，重庆 401331，中国
^c重庆大学能源与动力工程学院，工程热物理研究所，重庆 400044，中国
^d化学与生物分子工程学院，香港科技大学，香港 999077，中国

收稿日期:2022-05-31 修回日期:2022-07-24 接受日期:2022-10-05 出版日期:2023-01-28 发布日期:2022-10-08

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output of Fuel Cell

Jian Wang^a^,^#, Wen-Hui Xuan^a^,^#, Qian He^a, Jing-Xia Jiang^a, Yuan-Yuan Zhou^a, Yao Nie^b, Qiang Liao^c, Min-Hua Shao^d, Wei Ding^a^,^*(), Zi-Dong Wei^a^,^*()

^aChongqing Key Laboratory of Chemical Process for Clean Energy and Resource Utilization, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
^bChongqing Key Laboratory of Green Synthesis and Applications, College of Chemistry, Chongqing Normal University, Chongqing 401331, China
^cInstitute of Engineering Thermophysics, School of Energy and Power Engineering Chongqing University, Chongqing 400044, China
^dDepartment of Chemical and Biomolecular Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon 999077, Hong Kong

Received:2022-05-31 Revised:2022-07-24 Accepted:2022-10-05 Published:2023-01-28 Online:2022-10-08
Contact: * Wei Ding, Tel: (86-23)65678931, E-mail address: dingwei128@cqu.edu.cn.;Zi-Dong Wei, Tel: (86-23)65678931, E-mail address: zdwei@cqu.edu.cn.
About author:^#These authors contributed equally to this work.

1. 1006-3471-29-1-2215003-S1.pdf(944KB)

摘要/Abstract

摘要：

质子交换膜燃料电池（PEMFC）是一种强耦合、复杂非线性、动态的、多输入多输出的能量转换装置，不容易达到或保持理想的工作状态。在动态的PEMFC的工作状态下，其输出的电流和电压是振动的、不稳定的，会对负载的使用和寿命造成很大的影响，严重时亦可损坏负载。该波动的电流或电压输出不仅直接决定着发电系统的成本，而且影响着有效的能量转换效率及电子原件和设备的寿命。基于此，本工作针对燃料电池动态特性及动态排水空间受限导致其电流不规则波动，进而影响输出电能品质和燃料电池系统及其他电子元件的寿命和维护成本等问题。开发了一种外延生长的方法制备排水空间可调控的抗溺水电极，通过调控载体的成核位点密度，形成一种具有不同排水空间的类超晶体结构微米级铂基催化剂。该催化剂制备的电极不仅表现出极佳的抗溺水性，在极低的电流振幅（25 mA·cm^-2）下持续稳定的输出高品质电能，同时提高了铂的利用率，使其组成的MEA比功率密度达到11.69 W·mg_Pt^-1，表现出极高的应用潜力。

关键词: 传质, PtCo合金, 电能品质, 类超晶格, 氧还原

Abstract:

The current or voltage fluctuation in fuel cell operation is harmful to the fuel cell system and power application equipment. Here, we report a technique to eliminate such a fluctuation by the aid of new type of catalysts, superlattice-like mesoporous PtCo catalysts. The current fluctuation in fuel cells catalyzed by two invented catalysts are fixed at as low as 25 mA·cm^-2 with a power of 0.75 W·cm^-2 or 120 mA·cm^-2 with a power of 1.01 W·cm^-2, and no noticeable current decay was detected over 100 h. By contrast, a cell catalyzed by conventional Pt/C catalysts with the same Pt loading delivered a current fluctuation as large as 180 mA·cm^-2 even at low power output of 0.30 W·cm^-2, which also showed 32% current decay rate in 50 h. The superlattices-like mesoporous structure not only enhances the mass transfer and depresses the water flooding but also effectively increases the Pt utilization within its 3D carbon frameworks. Its power output was as high as 11.69 W·mg_Pt^-1(MEA), which is 46.1% higher than the 2025 target of DOE, USA, 8.0 W·mg_Pt^-1(MEA).

Key words: Quality output, Superlattices-like, PtCo alloy, Mass transport, Oxygen reductive reaction

王健, 轩文辉, 何倩, 蒋金霞, 周圆圆, 聂瑶, 廖强, 邵敏华, 丁炜, 魏子栋. 类超晶格结构：有序性传质赋予燃料电池高品质输出性能[J]. 电化学（中英文）, 2023, 29(1): 2215003.

Jian Wang, Wen-Hui Xuan, Qian He, Jing-Xia Jiang, Yuan-Yuan Zhou, Yao Nie, Qiang Liao, Min-Hua Shao, Wei Ding, Zi-Dong Wei. Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output of Fuel Cell[J]. Journal of Electrochemistry, 2023, 29(1): 2215003.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.13208/j.electrochem.2215003

https://electrochem.xmu.edu.cn/CN/Y2023/V29/I1/2215003

图/表 4

参考文献 30

[1]	Wang G J, Yu Y, Liu H, Gong C L, Wen S, Wang X H, Tu Z K. Progress on design and development of polymer electrolyte membrane fuel cell systems for vehicle applications: A review[J]. Fuel Process Technol., 2018, 179: 203-228. doi: 10.1016/j.fuproc.2018.06.013 URL
[2]	Kongkanand A, Mathias M F. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells[J]. J. Phys. Chem. Lett., 2016, 7(7): 1127-1137. doi: 10.1021/acs.jpclett.6b00216 pmid: 26961326
[3]	Ahluwalia R K, Wang X, Steinbach A J. Performance of advanced automotive fuel cell systems with heat rejection constraint[J]. J. Power Sources, 2016, 309: 178-191. doi: 10.1016/j.jpowsour.2016.01.060 URL
[4]	Béthoux O, Cathelin J. Design of a high voltage input - output ratio dc-dc converter dedicated to small power fuel cell systems[J]. Eur. Phys. J. Appl. Phys., 2010, 52(3): 31102. doi: 10.1051/epjap/2010148 URL
[5]	Sakka M A, Mierlo J V, Gualous H. Dc/Dc Converters for Electric vehicles[M]. Turkey: Seref S, 2011, 100: 466.
[6]	Kolli A, Gaillard A, De Bernardinis A, Bethoux O, Hissel D, Khatir Z. A review on DC/DC converter architectures for power fuel cell applications[J]. Energ. Convers. Manage., 2015, 105: 716-730. doi: 10.1016/j.enconman.2015.07.060 URL
[7]	Wen H Q, Su B. Hybrid-mode interleaved boost converter design for fuel cell electric vehicles[J]. Energ. Convers. Manage., 2016, 122: 477-487. doi: 10.1016/j.enconman.2016.06.021 URL
[8]	Xu H P, Kong L, Wen X H. Fuel cell power system and high power DC-DC converter[J]. IEEE T Power. Electr., 2004, 19(5): 1250-1255. doi: 10.1109/TPEL.2004.833440 URL
[9]	Tanrioven M, Alam M S. Modeling, control, and power quality evaluation of a PEM fuel cell-based power supply system for residential use[J]. IEEE T Power. Electr., 2006, 42(6): 1582-1589.
[10]	Zenith F, Skogestad S. Control of fuel cell power output[J]. J. Process Contr., 2007, 17(4): 333-347. doi: 10.1016/j.jprocont.2006.10.004 URL
[11]	Shen J, Xu L, Chang H W, Tu Z K, Chan S H. Partial flooding and its effect on the performance of a proton exchange membrane fuel cell[J]. Energ. Convers. Manage., 2020, 207: 112537. doi: 10.1016/j.enconman.2020.112537 URL
[12]	Xing L, Shi W D, Su H N, Xu Q, Das P K, Mao B D, Scott K. Membrane electrode assemblies for PEM fuel cells: A review of functional graded design and optimization[J]. Energy, 2019, 177: 445-464. doi: 10.1016/j.energy.2019.04.084
[13]	Laribi S, Mammar K, Sahli Y, Koussa K. Analysis and diagnosis of PEM fuel cell failure modes (flooding & drying) across the physical parameters of electrochemical impedance model: Using neural networks method[J]. Sustain. Energy Technol. Assess., 2019, 34: 35-42.
[14]	Ijaodola O S, El-Hassan Z, Ogungbemi E, Khatib F N, Wilberforce T, Thompson J, Olabi A G. Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)[J]. Energy, 2019, 179: 246-267. doi: 10.1016/j.energy.2019.04.074
[15]	Li Y H, Pei P C, Wu Z Y, Ren P, Jia X N, Chen D F, Huang S W. Approaches to avoid flooding in association with pressure drop in proton exchange membrane fuel cells[J]. Appl. Energ., 2018, 224: 42-51. doi: 10.1016/j.apenergy.2018.04.071 URL
[16]	Sun R L, Xia Z X, Shang L, Fu X D, Li H Q, Wang S L, Sun G Q. Hierarchically ordered arrays with platinum coated PANI nanowires for highly efficient fuel cell electrodes[J]. J. Mater. Chem. A, 2017, 5(29): 15260-15265. doi: 10.1039/C7TA02500A URL
[17]	Zeng Y C, Shao Z G, Zhang H J, Wang Z Q, Hong S J, Yu H M, Yi B L. Nanostructured ultrathin catalyst layer based on open-walled PtCo bimetallic nanotube arrays for proton exchange membrane fuel cells[J]. Nano Energy, 2017, 34: 344-355. doi: 10.1016/j.nanoen.2017.02.038 URL
[18]	Tian Z Q, Lim S H, Poh C K, Tang Z, Xia Z T, Luo Z Q, Shen P K, Chua D, Feng Y P, Shen Z X, Lin J Y. A highly order-structured membrane electrode assembly with vertically aligned carbon nanotubes for ultra-low Pt loading PEM fuel cells[J]. Adv. Energy Mater., 2011, 1(6): 1205-1214. doi: 10.1002/aenm.201100371 URL
[19]	Steinbach A J, Debe M K, Pejsa M J, Peppin D M, Haug A T, Kurkowski M J, Hendricks S M. Influence of Anode GDL on PEMFC ultra-thin electrode water management at low temperatures[M]. ECS Trans. 2011, 41: 449-457.
[20]	Jiang S F, Yi B L. The progress of order-structured membrane electrode assembly[J]. J. Electrochem., 2016, 22(3): 213-218.
[21]	Yan C, Wang T. A new view for nanoparticle assemblies: From crystalline to binary cooperative complementarity[J]. Chem. Soc. Rev., 2017, 46(5): 1483-1509. doi: 10.1039/c6cs00696e pmid: 28059420
[22]	Li T T, Xue B, Wang B W, Guo G N, Han D D, Yan Y C, Dong A G. Tubular monolayer superlattices of hollow Mn₃O₄nanocrystals and their oxygen reduction activity[J]. J. Am. Chem. Soc., 2017, 139(35): 12133-12136. doi: 10.1021/jacs.7b06587 URL
[23]	Cheng K Y, Lin C H, Tzeng M C, Mahmood A, Saeed M, Chen C H, Ong C W, Lee S L. Superstructure manipulation and electronic measurement of monolayers comprising discotic liquid crystals with intrinsic dipole moment using STM/STS[J]. Chem. Commun., 2018, 54(58): 8048-8051. doi: 10.1039/C8CC04241A URL
[24]	Ding J, Liu Z, Liu X R, Liu J, Deng Y D, Han X P, Zhong C, Hu W B. Mesoporous decoration of freestanding palladium nanotube arrays boosts the electrocatalysis capabilities toward formic acid and formate oxidation[J]. Adv. Energy Mater., 2019, 9(25): 1900955. doi: 10.1002/aenm.v9.25 URL
[25]	Burian M, Karner C, Yarema M, Heiss W, Amenitsch H, Dellago C, Lechner R T. A shape-induced orientation phase within 3D nanocrystal solids[J]. Adv. Mater., 2018, 30(32): 1802078. doi: 10.1002/adma.v30.32 URL
[26]	Wang J, Wu G P, Wang W L, Xuan W H, Jiang J X, Wang J C, Li L, Lin W F, Ding W, Wei Z D. A neural-network-like catalyst structure for the oxygen reduction reaction: carbon nanotube bridged hollow PtCo alloy nanoparticles in a MOF-like matrix for energy technologies[J]. J. Mater. Chem. A, 2019, 7(34): 19786-19792. doi: 10.1039/c9ta06712d
[27]	Wang J, Ding W, Wei Z D. Review: Performance of polymer electrolyte membrane fuel cells at ultra-low platinum loadings[J]. Acta Phys. -Chim. Sin., 2020, 37(9): 2009094.
[28]	Wang J, Wu G P, Xuan W H, Peng L S, Feng Y, Ding W, Li L, Liao Q, Wei Z D. A framework ensemble facilitates high Pt utilization in a low Pt loading fuel cell[J]. Catal. Sci. Technol., 2021, 11(8): 2957-2963. doi: 10.1039/D1CY00028D URL
[29]	Wang Y C, Lai Y J, Song L, Zhou Z Y, Liu J G, Wang Q, Yang X D, Chen C, Shi W, Zheng Y P, Rauf M, Sun S G. S-doping of an Fe/N/C ORR catalyst for polymer electrolyte membrane fuel cells with high power density[J]. Angew. Chem. Int. Edit., 2015, 54(34): 9907-9910. doi: 10.1002/anie.v54.34 URL
[30]	Wang M J, Zhao T, Luo W, Mao Z X, Chen S G, Ding W, Deng Y H, Li W, Li J, Wei Z D. Quantified mass transfer and superior antiflooding performance of ordered macro-mesoporous electrocatalysts[J]. AIChE J., 2018, 64(7): 2881-2889. doi: 10.1002/aic.v64.7 URL

类超晶格结构：有序性传质赋予燃料电池高品质输出性能

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output of Fuel Cell

RichHTML

PDF (PC)

补充材料

可视化

摘要/Abstract

引用本文

使用本文

图/表 4

参考文献 30

相关文章 15

Metrics

[1]	韩联欢, 郭佳瑶, 崔苗苗. 电极过程动力学反应速率常数测量的若干方法[J]. 电化学（中英文）, 2024, 30(2): 2303241-.
[2]	郑天龙, 欧明玉, 徐松, 毛信表, 王释一, 和庆钢. 一体式可再生燃料电池双功能氧催化剂的研究进展[J]. 电化学（中英文）, 2023, 29(7): 2205301-.
[3]	刘思淼, 周景娇, 季世军, 文钟晟. FeNi-CoP/NC双功能催化剂的制备及电催化性能研究[J]. 电化学（中英文）, 2023, 29(10): 211118-.
[4]	郭鸿波, 王亚妮, 郭凯, 雷海涛, 梁作中, 张学鹏, 曹睿. 吸电子和亲水性Co-卟啉促进电催化氧还原反应的研究[J]. 电化学（中英文）, 2022, 28(9): 2214002-.
[5]	张天恩, 颜雅妮, 张俊明, 瞿希铭, 黎燕荣, 姜艳霞. 调控Pt₃Zn合金化程度改善酸性氧还原活性与稳定性[J]. 电化学（中英文）, 2022, 28(4): 2106091-.
[6]	冯雅辰, 王翔, 王宇琪, 严会娟, 王栋. 电催化氧还原反应的原位表征[J]. 电化学（中英文）, 2022, 28(3): 2108531-.
[7]	袁会芳, 张越, 翟兴吾, 胡立兵, 葛桂贤, 王刚, 于锋, 代斌. 氮掺杂碳原位锚定铜纳米颗粒用于高效氧还原反应催化剂[J]. 电化学（中英文）, 2021, 27(6): 671-680.
[8]	林华, 吴艺津, 李君涛, 周尧. 一锅法制备Fe₂O₃@Fe-N-C氧还原电催化剂及其锌-空气电池的性能研究[J]. 电化学（中英文）, 2021, 27(4): 366-376.
[9]	李文杰, 田东旭, 杜红, 燕希强. ORR催化剂Ni_m@Pt₁Au_n_-_m_-1(n = 19, 38, 55, 79; m = 1, 6, 13, 19)的密度泛函研究[J]. 电化学（中英文）, 2021, 27(4): 357-365.
[10]	刘芳艳, 张倩, 李玥琨, 黄丰, 王梦晔. Co_1-_xS-MnS@CNTs/CNFs的制备及其氧还原电催化性能[J]. 电化学（中英文）, 2021, 27(3): 301-310.
[11]	吴志鹏, 钟传建. 钯基氧还原和乙醇氧化反应电催化剂:关于结构和机理研究的一些近期见解[J]. 电化学（中英文）, 2021, 27(2): 144-156.
[12]	徐明俊, 刘杰, 葛君杰, 刘长鹏, 邢巍. 长春应化所金属氮碳氧还原催化剂的研究进展[J]. 电化学（中英文）, 2020, 26(4): 464-473.
[13]	徐能能, 乔锦丽. 锌-空气电池双功能催化剂研究进展[J]. 电化学（中英文）, 2020, 26(4): 531-562.
[14]	姚硕, 黄太仲, RizwanHaider, 房恒义, 于洁玫, 姜占坤, 梁栋, 孙玥, 原鲜霞. NiO@rGO负载钯、银纳米粒子用作氧还原催化剂[J]. 电化学（中英文）, 2020, 26(2): 270-280.
[15]	杨智, 沈亚云, 周娥, 魏成玲, 秦好丽, 田娟. 前驱体中N含量对FeN/C催化剂氧还原活性的影响研究[J]. 电化学（中英文）, 2020, 26(1): 130-135.