复合材料xLiFePO4·yLi3V2(PO4)3的合成及电化学性能(英文)

doi:10.61558/2993-074X.2876

电化学（中英文） ›› 2012, Vol. 18 ›› Issue (1): 31-36. doi: 10.61558/2993-074X.2876

复合材料xLiFePO4·yLi3V2(PO4)3的合成及电化学性能(英文)

马平平^1,2*, 刘志坚¹, 夏建华¹, 陈宇², 胡朴², 卢志超¹, 夏定国³

1．中国钢研科技集团公司，北京 100081；2．北京中新联数码科技有限公司，北京 100041；3．北京大学工学院，北京 100871

收稿日期:2011-09-28 修回日期:2011-10-28 出版日期:2012-02-28 发布日期:2011-11-30
通讯作者: 马平平 E-mail:pingping25cn@yahoo.com.cn
基金资助:
This work was financially supported by National High Technology Research and Development Program of China (No. 2008AA03Z208)

Synthesis and electrochemical performance of xLiFePO4·yLi3V2(PO4)3 composites

MA Ping-Ping^1,2*, LIU Zhi-Jian¹, XIA Jian-Hua¹, CHEN Yu², HU Pu², LU Zhi-Chao¹, XIA Ding-Guo³

1. China Iron and Steel Research Institute Group, Beijing 100081, China; 2. Beijing Central Press Union Technology Co LTD., Beijing 100041, China; 3. College of Engineering, Peking University, Beijing 100871, China

Received:2011-09-28 Revised:2011-10-28 Published:2012-02-28 Online:2011-11-30
Contact: MA Ping-Ping E-mail:pingping25cn@yahoo.com.cn
Supported by:
This work was financially supported by National High Technology Research and Development Program of China (No. 2008AA03Z208)

摘要/Abstract

摘要： 采用固相法合成了不同比例的xLiFePO4·yLi3V2(PO4)3 复合物. 利用XRD、SEM和电化学测试仪等分析方法表征了所有样品的特性. 结果表明，样品0.95LiFePO4·0.05Li3V2(PO4)3 以0.2 C的充放电倍率放电时具有162.7 mAh/g的电化学容量，同时该样品表现出了较其它样品更优异的循环稳定性和更良好的导电性能，不同倍率下循环60周后，其容量保持率高达98.7%. 颗粒细小的尺寸和均一的分布使得样品0.95LiFePO4?0.05Li3V2(PO4)3具有良好的电化学性能.

关键词: 锂离子电池, 复合物, 掺杂, xLiFePO4·yLi3V2(PO4)3

Abstract: A series of xLiFePO4·yLi3V2(PO4)3 composites were systematically synthesized through solid state reactions by variations in the proportions of LiFePO4 and Li3V2(PO4)3. The properties of the prepared compounds were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical measurements. The capacity of 162.7 mAh/g at 0.2 C rate was obtained with the relatively good cycle stability and good conductivity for 0.95LiFePO4·0.05Li3V2(PO4)3 due to more uniformed distributed and smaller particle sizes.

Key words: lithium ion batteries, composite, doping, xLiFePO4·yLi3V2(PO4)3

中图分类号:

O646.21

马平平, 刘志坚, 夏建华, 陈宇, 胡朴, 卢志超, 夏定国. 复合材料xLiFePO4·yLi3V2(PO4)3的合成及电化学性能(英文)[J]. 电化学（中英文）, 2012, 18(1): 31-36.

MA Ping-Ping, LIU Zhi-Jian, XIA Jian-Hua, CHEN Yu, HU Pu, LU Zhi-Chao, XIA Ding-Guo. Synthesis and electrochemical performance of xLiFePO4·yLi3V2(PO4)3 composites[J]. Journal of Electrochemistry, 2012, 18(1): 31-36.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.61558/2993-074X.2876

https://electrochem.xmu.edu.cn/CN/Y2012/V18/I1/31

参考文献

[1] Padhi A K, Nanjundaswamy K S, Goodenough J B. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries[J]. Journal of The Electrochemical Society, 1997, 144(4): 1188-1194.
[2] Chung S Y, Bloking J T, Chiang Y M. Electronically conductive phospho-olivines as lithium storage electrodes[J]. Nature Materials, 2002, 1(2): 123-128.
[3] Li T (李婷), Qian J F (钱江峰), Cao Y L (曹余良), et al. Electrochemical Performance of Li1-xMxFePO4 Cathode Materials Synthesized by Polymer Pyrolysis Poute[J]. Journal of Electrochemistry (电化学), 2007, 13(2): 136-139.
[4] Huang H, Yin S C, Nazar L F. Approaching theoretical capacity of LiFePO4 at room temperature at high rates. Electrochemical and Solid-State Letters, 2001, 4(1): A170-A172.
[5] Franger S, Cras F L, Bourbon C, et al. LiFePO4 synthesis routes for enhanced electrochemical performance[J]. Electrochemical and Solid-State Letters, 2002, 5(10): A231-A233.
[6] Herle P S, Ellis B, Coombs N, et al. Nano-network electronic conduction in iron and nickel olivine phosphates[J]. Nature Materials, 2004, 3(3): 147-152.
[7] Croce F, Epifanio A D, Hassoun J, et al. A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode[J]. Electrochemical and Solid-State Letters, 2002, 5(3): A47-A50.
[8] Park K S, Son J T, Chung H T, et al. Surface modification by silver coating for improving electrochemical properties of LiFePO4 [J]. Solid State Communications, 2004, 129(5): 311-314.
[9] Yamada,A.; Chung, S. C. Crystal chemistry of the olivine-type Li(MnyFe1-y)PO4 and (MnyFe1-y)PO4 as possible 4 V cathode materials for lithium batteries[J]. Journal of The Electrochemical Society, 2001, 148(8): A960-A967.
[10] Wang G X, Bewlay S, Yao J, et al. Characterization of LiMxFe1-xPO4 (M=Mg, Zr, Ti) cathode materials prepared by the sol-gel method[J]. Electrochemical and Solid-State Letters, 2002, 7(12): A503-A506.
[11] Ren M M, Zhou Z, Li Y Z, et al. Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries[J]. Journal of Power Sources, 2006, 162(2): 1357-1362.
[12] Barker J, Gover R K B, Burns P, et al. The effect of Al substitution on the electrochemical insertion properties of the lithium vanadium phosphate, Li3V2(PO4)3[J]. Journal of The Electrochemical Society, 2007, 154(4): A307-A313.
[13] Zheng J C, Li X H, Wang Z X. LiFePO4 with enhanced performance synthesized by a novel synthetic route[J]. Journal of Power Sources, 2008, 184(2): 574-577.
[14] Sun C S, Zhou Z, Xu Z G, et al. Improved high-rate charge/discharge performances of LiFePO4 via V-doping[J]. Journal of Power Sources, 2009, 193(2): 841-845.
[15] Liu K Y (刘开源), Huang J S (黄建书), Yang L(杨立). Effects of different carbon sources on performance of Li3V2(PO4)3/C composite cathode materials[J]. Journal of Electrochemistry (电化学), 2010, 16(1): 30-34.
[16] Wang L N, Li Z C, Xu H J, et al. Studies of Li3V2(PO4)3 additives for the LiFePO4 based Li ion batteries[J]. The Journal of Physical Chemistry C, 2008, 112(1): 308-312.
[17] Yang M R, Ke W H, Wu S H. Improving electrochemical properties of lithium iron phosphate by addition of vanadium[J]. Journal of Power Sources, 2007, 165 (2): 646-650.
[18] Zhao T, Xu W, Ye Q, et al. Local structure of vanadium in doped LiFePO4[J]. Journal of Synchrotron Radiation, 2010, 17: 584-589.
[19] Zheng J C, Li X H, Wang Z X, et al. Novel synthesis of LiFePO4 -Li3V2(PO4)3 a composite cathode material by aqueous precipitation and lithiation[J]. Journal of Power Sources, 2010, 195(9): 2935-2938.
[20] Bai Y (白莹), Yang J M (杨觉明), Qing C B (卿春波), et al. Electrochemical Performances of C-Coating and Co-Doping LiFePO4[J]. Journal of Electrochemistry (电化学), 2011, 17(3): 334-338.
[21] Chen Y (陈宇), Wang Z L (王忠丽), Yu C Y (于春阳), et al. Electrochemical properties of Mo-doped LiFePO4 cathode material[J]. Acta Physico-Chimica Sinica (物理化学学报), 2008, 24(8): 1498-1502.
[22] Saidi M Y, Barker J, Huang H, et al. Electrochemical properties of lithium vanadium phosphate as a cathode material for lithium-ion batteries[J]. Electrochemical and Solid-State Letters, 2002, 5(7): A149-A151.
[23] Zheng J C, Li X H, Wang Z X, et al. Characteristics of xLiFePO4 center dot yLi3V2(PO4)3 electrodes for lithium batteries[J]. Ionics, 2009, 15(6): 753-759.
[24] Yamada A, Koizumi H, Nishimura S, et al. Room-temperature miscibility gap in LixFePO4[J]. Nature Materials, 2006, 5(5): 357-360.
[25] Meethong N, Huang H Y, Speakman S A, et al. Strain accommodation during phase transformations in olivine-based cathodes as a materials selection criterion for high-power rechargeable batteries[J]. Advanced Functional Materials, 2007, 17(7): 1115-1123.

复合材料xLiFePO4·yLi3V2(PO4)3的合成及电化学性能(英文)

Synthesis and electrochemical performance of xLiFePO4·yLi3V2(PO4)3 composites

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

[1]	黄荣钦, 廖卫平, 晏梦璇, 刘石, 李远明, 康雄武. 磷掺杂的Ru-Pt合金催化剂及其电催化碱性析氢性能[J]. 电化学（中英文）, 2023, 29(5): 2203081-.
[2]	丁明宇, 蒋文杰, 余天琦, 卓小燕, 覃晓静, 尹诗斌. CeO₂电子调控FeNi纳米片大电流密度电解水催化剂[J]. 电化学（中英文）, 2023, 29(5): 2208121-.
[3]	张衡, 夏力行, 姜珊, 王福芝, 谭占鳌. 氮掺杂石墨毡对水系醌基氧化还原液流电池性能的影响[J]. 电化学（中英文）, 2023, 29(12): 2203231-.
[4]	马恩辉, 刘旭坡, 申涛, 王得丽. 醇盐自模板法构筑碳封装NiFeV基电催化剂用于析氧反应[J]. 电化学（中英文）, 2023, 29(11): 211103-.
[5]	赵刚, 龚正良, 李益孝, 杨勇. 氧化钨和磷钨酸对LiNi_0.96Co_0.02Mn_0.02O₂材料的表面包覆改性研究[J]. 电化学（中英文）, 2023, 29(10): 2204281-.
[6]	陈思, 郑淞生, 郑雷铭, 张叶涵, 王兆林. 水热法制备锂电池Si@C负极材料的工艺优化研究[J]. 电化学（中英文）, 2022, 28(8): 2112221-.
[7]	王京玥, 王睿, 王诗琦, 王立帆, 詹纯. 一步固相法合成锂离子电池高镍层状正极材料[J]. 电化学（中英文）, 2022, 28(8): 2112131-.
[8]	谯渭川, 李芳儒, 肖瑾林, 屈丽娟, 赵晓, 张梦, 庞春雷, 李子坤, 任建国, 贺雪琴. 硅氧材料的膨胀性能研究和改善[J]. 电化学（中英文）, 2022, 28(5): 2108121-.
[9]	王加义, 郭胜楠, 王新, 谷林, 苏东. 锂离子电池高镍层状氧化物正极结构失效机制[J]. 电化学（中英文）, 2022, 28(2): 2108431-.
[10]	郭瑞琪, 吴锋, 王欣然, 白莹, 吴川. 多电子反应材料推动高能量密度电池发展：材料与体系创新[J]. 电化学（中英文）, 2022, 28(12): 2219011-.
[11]	朱振威, 邱景义, 王莉, 曹高萍, 何向明, 王京, 张浩. 人工智能在锂离子电池研发中的应用[J]. 电化学（中英文）, 2022, 28(12): 2219003-.
[12]	侯廷政, 陈翔, 蒋璐, 唐城. 当前和下一代锂离子电池电解液的原子尺度微观认识和研究进展[J]. 电化学（中英文）, 2022, 28(11): 2219007-.
[13]	李丹丹, 纪翔宇, 陈明, 杨燕茹, 王晓东, 冯光. 低聚离子液体的体相与界面及其电化学储能应用[J]. 电化学（中英文）, 2022, 28(11): 2219002-.
[14]	万紫轩, 王超辉, 康雄武. 泡沫铜支撑Ru掺杂Cu₃P自支撑催化剂及其析氢性能[J]. 电化学（中英文）, 2022, 28(10): 2214005-.
[15]	骆晨旭, 师晨光, 余志远, 黄令, 孙世刚. 富锂锰基层状正极材料的合成及其首周过充下的结构演化[J]. 电化学（中英文）, 2022, 28(1): 2006131-.