对工业电池交流内阻测量的讨论（英文）

doi:10.61558/2993-074X.2905

电化学（中英文） ›› 2012, Vol. 18 ›› Issue (3): 205-214. doi: 10.61558/2993-074X.2905

• 电化学材料基础与表界面研究专辑（中国科学院化学研究所万立骏院士主编） • 上一篇下一篇

对工业电池交流内阻测量的讨论（英文）

张亚利^1,2*, 辛森¹, 郭玉国^1*, 万立骏¹

1. 中国科学院化学研究所，北京 100190； 2. 潍坊威能环保电源有限公司，山东寿光 262705

收稿日期:2011-11-30 修回日期:2012-03-23 出版日期:2012-06-28 发布日期:2012-03-25
通讯作者: 张亚利, 郭玉国 E-mail:ylzhang@iccas.ac.cn, ygguo@iccas.ac.cn
基金资助:
This work was supported by MOST (No. 2012AA110407, No. 2011CB935700), National Natural Science Foundation of China (No. 21073205, No. 21121063) and the Chinese Academy of Sciences

Comments on Internal Alternating Current Resistance Test Standard and Methods of Lithium-Ion Batteries

ZHANG Ya-Li^1,2*, XIN Sen¹, GUO Yu-Guo^1*, WAN Li-Jun¹

1. Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China 2. Weifang Wina Green Power Co., Ltd., Shouguang 262705, Shandong, China

Received:2011-11-30 Revised:2012-03-23 Published:2012-06-28 Online:2012-03-25
Contact: ZHANG Ya-Li, GUO Yu-Guo E-mail:ylzhang@iccas.ac.cn, ygguo@iccas.ac.cn
Supported by:
This work was supported by MOST (No. 2012AA110407, No. 2011CB935700), National Natural Science Foundation of China (No. 21073205, No. 21121063) and the Chinese Academy of Sciences

摘要/Abstract

摘要： 能源和环境的可持续发展是本世纪最重要的问题之一. 二次电池是具有重要意义的高效储能器件，在电动汽车及混合动力汽车等实际应用中，经常会用到电池组，此时需要考虑电池组中每一个单体电池性能的一致性. 内阻作为用于表征电池一致性的性能参数之一，对电池的工业制造和使用非常重要。目前，锂离子电池等二次电池的内阻测试都是按照国际电工委员会第 61960 号标准（2003）来进行的. 本文从该标准的理论基础和其在内阻测试仪中的实际应用等方面出发，分析并指出了该测试标准中的问题，希望能为整个电池行业新标准的建立提供一定的指导，并有助于可持续能源设备及电动汽车用动力电池的开发.

关键词: 锂离子电池, 内阻, 电化学阻抗谱方法, 交流内阻测试标准

Abstract: The sustainable development of energy and environment is one of the most influential issues of this century. Batteries, especially secondary batteries are important for powering out daily life. However, in many practical applications, such as in electric vehicles and hybrid electric vehicles, batteries should be used in packs and the performance consistency of each battery in the pack should be taken into consideration. As one of the performance parameters being used to characterize the battery consistency, internal resistance is of great importance to the industrial fabrication and the use of batteries. Currently, internal resistance tests of secondary batteries, such as lithium-ion batteries are usually performed in accordance with the International Electrotechnical Commission (IEC) Standard 61960 (2003). This comment addresses the problematic issues in the standard, both from its theoretical basis and its practical use in internal resistance testers, for providing instructional views on new standard setting of the entire battery industry, and hoping it definitely promote the development of sustainable energy devices as well as electric vehicles.

Key words: lithium-ion batteries, internal resistance, electrochemical impedance spectroscopy, internal alternating current resistance test standard

中图分类号:

TM 912.9

张亚利, 辛森, 郭玉国, 万立骏. 对工业电池交流内阻测量的讨论（英文）[J]. 电化学（中英文）, 2012, 18(3): 205-214.

ZHANG Ya-Li, XIN Sen, GUO Yu-Guo, WAN Li-Jun. Comments on Internal Alternating Current Resistance Test Standard and Methods of Lithium-Ion Batteries[J]. Journal of Electrochemistry, 2012, 18(3): 205-214.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.61558/2993-074X.2905

https://electrochem.xmu.edu.cn/CN/Y2012/V18/I3/205

参考文献

[1] Armand M, Tarascon J M. Building better batteries[J]. Nature, 2008, 451(7179): 652-657.
[2] Maier J. Nanoionics: Ion transport and electrochemical storage in confined systems[J]. Nature Materials, 2005, 4(11): 805-815.
[3] Whittingham M S. Lithium batteries and cathode materials[J]. Chemical Reviews, 2004, 104(10): 4271-4302.
[4] Arico A S, Bruce P, Scrosati B, et al. Nanostructured materials for advanced energy conversion and storage devices[J]. Nature Materials, 2005, 4(5): 366-377.
[5] Balaya P. Size effects and nanostructured materials for energy applications[J]. Energy & Environmental Science, 2008, 1(6): 645-654.
[6] Bruce P G, Scrosati B, Tarascon J-M. Nanomaterials for rechargeable lithium batteries[J]. Angewandte Chemie International Edition, 2008, 47(16): 2930-2946.
[7] Guo Y-G, Hu J-S, Wan L-J. Nanostructured materials for electrochemical energy conversion and storage devices[J]. Advanced Materials, 2008, 20(15): 2878-2887.
[8] Li H, Wang Z, Chen L, et al. Research on advanced materials for Li-ion batteries[J]. Advanced Materials, 2009, 21(45): 4593-4607.
[9] Berdichevsky G, Kelty K, Straubel J, et al. The tesla roadster battery system. Tesla Motors. 2006: 1-5.
[10] Barsoukov E, Macdonald J R. Impedance spectroscopy: Theory, experiment and applications[M]. 2nd Ed. Hoboken: John Wiley & Sons, Inc., 2005: 1-616.
[11] Orazem M E, Tribollet B. Electrochemical impedance spectroscopy[M]. Hoboken: John Wiley & Sons, Inc., 2008: 1-525.
[12] Maier J. Physical chemistry of ionic materials: Ions and electrons in solids[M]. Chichester: John Wiley & Sons, Ltd, 2004: 1-537.
[13] Bard A J, Faulkner L R. Electrochemical methods: Fundamentals and applications[M]. 2nd Ed. New York: John Wiley & Sons, Inc., 2000: 1-856.
[14] Lee J-S, Jamnik J, Maier J. Generalized equivalent circuits for mixed conductors: Silver sulfide as a model system[J]. Monatshefte für Chemie/Chemical Monthly, 2009, 140(9): 1113-1119.
[15] HIOKI E.E. Corporation. Product Catalog of 3561 Battery HiTESTER[EB/OL]. http://www.hioki.com/product/pdf/3561E1-56E-05U_web.pdf.

对工业电池交流内阻测量的讨论（英文）

Comments on Internal Alternating Current Resistance Test Standard and Methods of Lithium-Ion Batteries

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

[1]	左东旭, 李培超. 基于电化学-热-力耦合模型的快速充电下锂离子电池的老化特性分析[J]. 电化学（中英文）, 2024, 30(9): 2402061-.
[2]	陈露露, 李浩冉, 刘维祎, 王伟. 锂离子电池正极材料原位漫反射光谱电化学研究[J]. 电化学（中英文）, 2024, 30(6): 2314006-.
[3]	赵刚, 龚正良, 李益孝, 杨勇. 氧化钨和磷钨酸对LiNi_0.96Co_0.02Mn_0.02O₂材料的表面包覆改性研究[J]. 电化学（中英文）, 2023, 29(10): 2204281-.
[4]	陈思, 郑淞生, 郑雷铭, 张叶涵, 王兆林. 水热法制备锂电池Si@C负极材料的工艺优化研究[J]. 电化学（中英文）, 2022, 28(8): 2112221-.
[5]	王京玥, 王睿, 王诗琦, 王立帆, 詹纯. 一步固相法合成锂离子电池高镍层状正极材料[J]. 电化学（中英文）, 2022, 28(8): 2112131-.
[6]	谯渭川, 李芳儒, 肖瑾林, 屈丽娟, 赵晓, 张梦, 庞春雷, 李子坤, 任建国, 贺雪琴. 硅氧材料的膨胀性能研究和改善[J]. 电化学（中英文）, 2022, 28(5): 2108121-.
[7]	王加义, 郭胜楠, 王新, 谷林, 苏东. 锂离子电池高镍层状氧化物正极结构失效机制[J]. 电化学（中英文）, 2022, 28(2): 2108431-.
[8]	郭瑞琪, 吴锋, 王欣然, 白莹, 吴川. 多电子反应材料推动高能量密度电池发展：材料与体系创新[J]. 电化学（中英文）, 2022, 28(12): 2219011-.
[9]	朱振威, 邱景义, 王莉, 曹高萍, 何向明, 王京, 张浩. 人工智能在锂离子电池研发中的应用[J]. 电化学（中英文）, 2022, 28(12): 2219003-.
[10]	侯廷政, 陈翔, 蒋璐, 唐城. 当前和下一代锂离子电池电解液的原子尺度微观认识和研究进展[J]. 电化学（中英文）, 2022, 28(11): 2219007-.
[11]	李丹丹, 纪翔宇, 陈明, 杨燕茹, 王晓东, 冯光. 低聚离子液体的体相与界面及其电化学储能应用[J]. 电化学（中英文）, 2022, 28(11): 2219002-.
[12]	骆晨旭, 师晨光, 余志远, 黄令, 孙世刚. 富锂锰基层状正极材料的合成及其首周过充下的结构演化[J]. 电化学（中英文）, 2022, 28(1): 2006131-.
[13]	蔡雪凡, 孙升. 多孔电极电池的循环伏安法模拟[J]. 电化学（中英文）, 2021, 27(6): 646-657.
[14]	彭依, 张伟, 左防震, 吕浩莹, 洪凯骏. 二硒化钼纳米球储锂和储镁的性能和机理研究[J]. 电化学（中英文）, 2021, 27(4): 456-464.
[15]	周莉, 吴勰, 薛照明. 热塑性聚氨酯基聚合物电解质的制备与表征[J]. 电化学（中英文）, 2021, 27(4): 439-448.