固态锂硫电池研究进展

doi:10.13208/j.electrochem.2217007

电化学（中英文） ›› 2023, Vol. 29 ›› Issue (3): 2217007. doi: 10.13208/j.electrochem.2217007

所属专题： “下一代二次电池”专题文章

固态锂硫电池研究进展

罗宇^a, 马如琴^a, 龚正良^b^,^*(), 杨勇^a^,^b^,^*()

^a厦门大学固体表面物理化学国家重点实验室，化学化工学院，福建厦门 361005
^b厦门大学能源学院，福建厦门 361005

收稿日期:2022-08-23 修回日期:2022-09-14 接受日期:2022-10-06 出版日期:2023-03-28 发布日期:2022-10-08

Recent Research Progresses of Solid-State Lithium-Sulfur Batteries

Yu Luo^a, Ru-Qin Ma^a, Zheng-Liang Gong^b^,^*(), Yong Yang^a^,^b^,^*()

^aState Key Laboratory for Physical Chemistry of Solid Surface, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China
^bCollege of Energy, Xiamen University, Xiamen 361005, Fujian, China

Received:2022-08-23 Revised:2022-09-14 Accepted:2022-10-06 Published:2023-03-28 Online:2022-10-08
Contact: *Tel: (592-86)2880703, E-mail address: zlgong@xmu.edu.cn; Tel: (592-86)2185753, E-mail address: yyang@xmu.edu.cn
About author:First author contact:
#Yu Luo and Ru-Qin Ma contributed equally to this work.
Supported by:
National Natural Science Foundation of China(21935009);National Key R&D Program of China(2021YFB2401800)

摘要/Abstract

摘要：

固态锂硫电池具有高能量密度和高安全性的潜在优势，被认为是最有前景的下一代储能体系之一。虽然固态电解质的应用有效地抑制了传统锂硫电池存在的“穿梭效应”和自放电现象，固态锂硫电池仍面临着多相离子/电子输运、电极/电解质界面稳定性、化学-机械稳定性、电极结构稳定性和锂枝晶生长等关键问题亟待解决。针对以上问题，本综述对近年来固态电解质、硫基复合正极、锂金属及锂合金负极以及电极/电解质界面的研究进行了详细的论述。作为固态锂硫电池的重要组成部分，固态电解质近年来受到了研究者们的广泛关注。本文首先对在锂硫电池中得到广泛应用的聚合物基、氧化物基、硫化物基固态电解质的种类和性质进行了概述，并对其在固态锂硫电池中的最新应用进行了系统的总结。在此基础上，对以单质硫、硫化锂、金属硫化物为活性物质的复合硫正极、锂金属及锂合金负极的反应机理以及面临的挑战进行了归纳和比较，对其解决策略进行了总结和分析。此外，对制约固态锂硫电池性能的电极/电解质界面离子/电子输运以及界面相容性问题及其改性策略进行了系统的阐述。最后，对固态锂硫电池的未来发展进行了展望。

关键词: 锂硫电池, 固态电解质, 界面相容性, 三相界面, 电化学-机械应力

Abstract:

All solid-state lithium-sulfur batteries (ASSLSBs) are considered to be one of the most promising next-generation energy storage systems, due to the promises of high energy density and safety. Although the use of solid-state electrolytes could effectively suppress the "shuttle effect" and self-discharge of the conventional liquid lithium-sulfur (Li-S) battery, the commercialization of ASSLSBs has been seriously hampered by the electrolyte degradation, electrode/electrolyte interfacial deterioration, electrochemo-mechanical failure, lithium dendrite growth and electrode pulverization, etc. This paper provides a comprehensive review of recent research progresses on the solid-state electrolytes, sulfur-containing composite cathodes, lithium metal and lithium alloy anodes, and electrode/electrolyte interfaces in ASSLSBs. Specifically, lithium sulfide and metal sulfide as new active cathode materials, and lithium alloy as new anode materials are overviewed and analyzed. In addition, some newly developed interfacial modification strategies for addressing the electrode/electrolyte interfacial challenges are also outlined. Furthermore, an outlook on the future research and development of high-performance ASSLSBs are also presented.

Key words: Lithium-sulfur batteries, Solid-state electrolytes, Interfacial compatibility, Triple-phase interfaces, Electrochemo-mechanical effects

罗宇, 马如琴, 龚正良, 杨勇. 固态锂硫电池研究进展[J]. 电化学（中英文）, 2023, 29(3): 2217007.

Yu Luo, Ru-Qin Ma, Zheng-Liang Gong, Yong Yang. Recent Research Progresses of Solid-State Lithium-Sulfur Batteries[J]. Journal of Electrochemistry, 2023, 29(3): 2217007.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.13208/j.electrochem.2217007

https://electrochem.xmu.edu.cn/CN/Y2023/V29/I3/2217007

图/表 8

参考文献 114

[1]	Yang X F, Luo J, Sun X L. Towards high-performance solid-state Li-S batteries: From fundamental understanding to engineering design[J]. Chem. Soc. Rev., 2020, 49(7): 2140-2195. doi: 10.1039/c9cs00635d pmid: 32118221
[2]	Umeshbabu E, Zheng B Z, Yang Y. Recent progress in all-solid-state lithium-sulfur batteries using high Li-ion conductive solid electrolytes[J]. Electrochem. Energy Rev., 2019, 2(2): 199-230. doi: 10.1007/s41918-019-00029-3
[3]	Wu J H, Shen L, Zhang Z H, Liu G Z, Wang Z Y, Zhou D, Wan H L, Xu X X, Yao X Y. All-solid-state lithium batteries with sulfide electrolytes and oxide cathodes[J]. Electrochem. Energy Rev., 2021, 4(1): 101-135. doi: 10.1007/s41918-020-00081-4
[4]	Wu J H, Liu S F, Han F D, Yao X Y, Wang C S. Lithium/sulfide all-solid-state batteries using sulfide electrolytes[J]. Adv. Mater., 2021, 33(6) : 2000751. doi: 10.1002/adma.v33.6 URL
[5]	Ohno S, Zeier W G. Toward practical solid-state lithium-sulfur batteries: Challenges and perspectives[J]. Acc. Mater. Res., 2021, 2(10): 869-880. doi: 10.1021/accountsmr.1c00116 URL
[6]	Schlem R, Burmeister C F, Michalowski P, Ohno S, Dewald G F, Kwade A, Zeier W G. Energy storage materials for solid-state batteries: Design by mechanochemistry[J]. Adv. Energy Mater., 2021, 11(30): 2101022. doi: 10.1002/aenm.v11.30 URL
[7]	Li M Y, Liu T, Shi Z, Xue W J, Hu Y S, Li H, Huang X J, Li J, Suo L M, Chen L Q. Dense all-electrochem-active electrodes for all-solid-state lithium batteries[J]. Adv. Mater., 2021, 33(26): 2008723. doi: 10.1002/adma.v33.26 URL
[8]	Cai X M, Cui B W, Ye B, Wang W Q, Ding J L, Wang G C. Poly(ionic liquid)-based quasi-solid-state copolymer electrolytes for dynamic-reversible adsorption of lithium polysulfides in lithium-sulfur batteries[J]. ACS Appl. Mater. Inter., 2019, 11(41): 38136-38146. doi: 10.1021/acsami.9b12297 URL
[9]	Guan X, Wu Q P, Zhang X W, Guo X H, Li C L, Xu J. In-situ crosslinked single ion gel polymer electrolyte with superior performances for lithium metal batteries[J]. Chem. Eng. J., 2020, 382: 122935. doi: 10.1016/j.cej.2019.122935 URL
[10]	Mackanic D G, Michaels W, Lee M, Feng D W, Lopez J, Qin J, Cui Y, Bao Z N. Crosslinked poly(tetrahydrofuran) as a loosely coordinating polymer electrolyte[J]. Adv. Energy Mater., 2018, 8(25): 1800703. doi: 10.1002/aenm.v8.25 URL
[11]	Judez X, Zhang H, Li C M, Eshetu G G, Zhang Y, Gonzalez-Marcos J A, Armand M, Rodriguez-Martinez L M. Polymer-rich composite electrolytes for all-solid-state Li-S cells[J]. J. Phys. Chem. Lett., 2017, 8(15): 3473-3477. doi: 10.1021/acs.jpclett.7b01321 pmid: 28696704
[12]	Wang L L, Ye Y S, Chen N, Huang Y X, Li L, Wu F, Chen R J. Development and challenges of functional electrolytes for high-performance lithium-sulfur batteries[J]. Adv. Funct. Mater., 2018, 28(38): 1800919. doi: 10.1002/adfm.v28.38 URL
[13]	Pan K C, Zhang L, Qian W W, Wu X K, Dong K, Zhang H T, Zhang S J. A flexible ceramic/polymer hybrid solid electrolyte for solid-state lithium metal batteries[J]. Adv. Mater., 2020, 32(17): 2000399. doi: 10.1002/adma.v32.17 URL
[14]	Dixit M B, Zaman W, Hortance N, Vujic S, Harkey B, Shen F Y, Tsai W Y, De Andrade V, Chen X C, Balke N, Hatzell K B. Nanoscale mapping of extrinsic interfaces in hybrid solid electrolytes[J]. Joule, 2020, 4(1): 207-221. doi: 10.1016/j.joule.2019.11.015 URL
[15]	Wang G L, Zhu X Y, Rashid A, Hu Z L, Sun P F, Zhang Q B, Zhang L. Organic polymeric filler-amorphized poly(ethylene oxide) electrolyte enables all-solid-state lithium-metal batteries operating at 35 °C[J]. J. Mater. Chem. A, 2020, 8(26): 13351-13363. doi: 10.1039/D0TA00335B URL
[16]	Sheng O W, Jin C B, Luo J M, Yuan H D, Fang C, Huang H, Gan Y P, Zhang J, Xia Y, Liang C, Zhang W K, Tao X Y. Ionic conductivity promotion of polymer electrolyte with ionic liquid grafted oxides for all-solid-state lithium-sulfur batteries[J]. J. Mater. Chem. A, 2017, 5(25): 12934-12942. doi: 10.1039/C7TA03699J URL
[17]	Cai X M, Ding J L, Chi Z Y, Wang W Q, Wang D Y, Wang G C. Rearrangement of ion transport path on nano-cross-linker for all-solid-state electrolyte with high room temperature ionic conductivity[J]. ACS Nano, 2021, 15(12): 20489-20503. doi: 10.1021/acsnano.1c09023 pmid: 34905333
[18]	Zhang H, Oteo U, Judez X, Eshetu G G, Martinez-Ibanez M, Carrasco J, Li C M, Armand M. Designer anion enabling solid-state lithium-sulfur batteries[J]. Joule, 2019, 3(7): 1689-1702. doi: 10.1016/j.joule.2019.05.003
[19]	Wang Y, Ji H F, Zhang X J, Shi J J, Li X N, Jiang X X, Qu X W. Cyclopropenium cationic-based covalent organic polymer-enhanced poly(ethylene oxide) composite polymer electrolyte for all-solid-state Li-S battery[J]. ACS Appl. Mater. Interfaces, 2021, 13(14): 16469-16477. doi: 10.1021/acsami.1c02309 URL
[20]	Marceau H, Kim C S, Paolella A, Ladouceur S, Lagace M, Chaker M, Vijh A, Guerfi A, Julien C M, Mauger A, Armand M, Hovington P, Zaghib K. In operando scanning electron microscopy and ultraviolet-visible spectroscopy studies of lithium/sulfur cells using all solid-state polymer electrolyte[J]. J. Power Sources, 2016, 319: 247-254. doi: 10.1016/j.jpowsour.2016.03.093 URL
[21]	Song Y X, Shi Y, Wan J, Lang S Y, Hu X C, Yan H J, Liu B, Guo Y G, Wen R, Wan L J. Direct tracking of the polysulfide shuttling and interfacial evolution in all-solid-state lithium-sulfur batteries: A degradation mechanism study[J]. Energy Environ. Sci., 2019, 12(8): 2496-2506. doi: 10.1039/C9EE00578A URL
[22]	Li X, Wang D H, Wang H C, Yan H F, Gong Z L, Yang Y. Poly(ethylene oxide)-Li₁₀SnP₂S₁₂ composite polymer electrolyte enables high-performance all-solid-state lithium sulfur battery[J]. ACS Appl. Mater. Inter., 2019, 11(25): 22745-22753. doi: 10.1021/acsami.9b05212 URL
[23]	Bai Y, Zhao Y B, Li W D, Meng L H, Bai Y P, Chen G R. New insight for solid sulfide electrolytes LSiPSI by using Si/P/S as the raw materials and I doping[J]. ACS Sustain. Chem. Eng., 2019, 7(15): 12930-12937. doi: 10.1021/acssuschemeng.9b01937 URL
[24]	Liu Y, Liu H W, Lin Y T, Zhao Y X, Yuan H, Su Y P, Zhang J F, Ren S Y, Fan H Y, Zhang Y G. Mechanistic investigation of polymer-based all-solid-state lithium/sulfur battery[J]. Adv. Funct. Mater., 2021, 31(41): 2104863. doi: 10.1002/adfm.v31.41 URL
[25]	Gao X, Zheng X L, Tsao Y C, Zhang P, Xiao X, Ye Y S, Li J, Yang Y F, Xu R, Bao Z N, Cui Y. All-solid-state lithium-sulfur batteries enhanced by redox mediators[J]. J. Am. Chem. Soc., 2021, 143(43): 18188-18195. doi: 10.1021/jacs.1c07754 URL
[26]	Ji Y C, Yang K, Liu M Q, Chen S M, Liu X H, Yang B, Wang Z J, Huang W Y, Song Z B, Xue S D, Fu Y D, Yang L Y, Miller T S, Pan F. PIM-1 as a multifunctional framework to enable high-performance solid-state lithium-sulfur batteries[J]. Adv. Funct. Mater., 2021, 31(47): 2104830. doi: 10.1002/adfm.v31.47 URL
[27]	Kim K J, Balaish M, Wadaguchi M, Kong LP, Rupp J L M. Solid-state Li-metal batteries: Challenges and horizons of oxide and sulfide solid electrolytes and their interfaces[J]. Adv. Energy Mater., 2021, 11(1): 2002689. doi: 10.1002/aenm.v11.1 URL
[28]	AbdelHamid A A, Cheong J L, Ying J Y. Li₇La₃Zr₂O₁₂ sheet-based framework for high-performance lithium-sulfur hybrid quasi-solid battery[J]. Nano Energy, 2020, 71: 104633. doi: 10.1016/j.nanoen.2020.104633 URL
[29]	Yu X W, Liu Y J, Goodenough J B, Manthiram A. Rationally designed PEGDA-LLZTO composite electrolyte for solid-state lithium batteries[J]. ACS Appl. Mater. Inter., 2021, 13(26): 30703-30711. doi: 10.1021/acsami.1c07547 URL
[30]	Bag S, Zhou C, Kim P J, Pol V G, Thangadurai V. LiF modified stable flexible PVDF-garnet hybrid electrolyte for high performance all-solid-state Li-S batteries[J]. Energy Storage Mater., 2020, 24: 198-207.
[31]	Li W W, Sun C Z, Jin J, Li Y P, Chen C H, Wen Z Y. Realization of the Li⁺ domain diffusion effect via constructing molecular brushes on the LLZTO surface and its application in all-solid-state lithium batteries[J]. J. Mater. Chem. A, 2019, 7(48): 27304-27312. doi: 10.1039/C9TA10400C URL
[32]	Yan C Y, Zhou Y, Cheng H, Orenstein R, Zhu P, Yildiz O, Bradford P, Jur J, Wu N Q, Dirican M, Zhang X W. Interconnected cathode-electrolyte double-layer enabling continuous Li-ion conduction throughout solid-state Li-S battery[J]. Energy Storage Mater., 2022, 44: 136-144.
[33]	Kou W J, Wang J X, Li W P, Lv R X, Peng N, Wu W J, Wang J T. Asymmetry-structure electrolyte with rapid Li⁺ transfer pathway towards high-performance all-solid-state lithium-sulfur battery[J]. J. Membr. Sci., 2021, 634: 119432. doi: 10.1016/j.memsci.2021.119432 URL
[34]	Liu Z C, Fu W J, Payzant E A, Yu X, Wu Z L, Dudney N J, Kiggans J, Hong K L, Rondinone A J, Liang C D. Anomalous high ionic conductivity of nanoporous β-Li₃PS₄[J]. J. Am. Chem. Soc., 2013, 135(3): 975-978. doi: 10.1021/ja3110895 URL
[35]	Mizuno F, Hayashi A, Tadanaga K, Tatsumisago M. New, highly ion-conductive crystals precipitated from Li₂S-P₂S₅ glasses[J]. Adv. Mater., 2005, 17(7): 918-921. doi: 10.1002/(ISSN)1521-4095 URL
[36]	Seino Y, Ota T, Takada K, Hayashi A, Tatsumisago M. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries[J]. Energy Environ. Sci., 2014, 7(2): 627-631. doi: 10.1039/C3EE41655K URL
[37]	Kanno R, Maruyama M. Lithium ionic conductor thio-LISICON: the Li₂S-GeS₂-P₂S₅ system[J]. J. Electrochem. Soc., 2001, 148(7): A742-A746. doi: 10.1149/1.1379028 URL
[38]	Ong S P, Mo Y F, Richards W D, Miara L, Lee H S, Ceder G. Phase stability, electrochemical stability and ionic conductivity of the Li_10±1MP₂X₁₂ (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors[J]. Energy Environ. Sci., 2013, 6(1): 148-156. doi: 10.1039/C2EE23355J URL
[39]	Boulineau S, Courty M, Tarascon J M, Viallet V. Mechanochemical synthesis of Li-argyrodite Li₆PS₅X (X = Cl, Br, I) as sulfur-based solid electrolytes for all solid state batteries application[J]. Solid State Ion., 2012, 221: 1-5. doi: 10.1016/j.ssi.2012.06.008 URL
[40]	Chen S R, Niu C J, Lee H, Li Q Y, Yu L, Xu W, Zhang J G, Dufek E J, Whittingham M S, Meng S, Xiao J, Liu J. Critical parameters for evaluating coin cells and pouch cells of rechargeable Li-metal batteries[J]. Joule, 2019, 3(4): 1094-1105. doi: 10.1016/j.joule.2019.02.004 URL
[41]	Liang J W, Chen N, Li X N, Li X, Adair K R, Li J J, Wang C H, Yu C, Banis M N, Zhang L, Zhao S Q, Lu S G, Huang H, Li R Y, Huang Y N, Sun X L. Li₁₀Ge(P_1-_xSb_x)₂S₁₂ lithium-ion conductors with enhanced atmospheric stability[J]. Chem. Mat., 2020, 32(6): 2664-2672. doi: 10.1021/acs.chemmater.9b04764 URL
[42]	Bonnick P, Niitani K, Nose M, Suto K, Arthur T S, Muldoon J. A high performance all solid state lithium sulfur battery with lithium thiophosphate solid electrolyte[J]. J. Mater. Chem. A, 2019, 7(42): 24173-24179. doi: 10.1039/C9TA06971B URL
[43]	Tufail M K, Zhou L, Ahmad N, Chen R J, Faheem M, Yang L, Yang W. A novel air-stable Li₇Sb_0.05P_2.95S_10.5I_0.5 superionic conductor glass-ceramics electrolyte for all-solid-state lithium-sulfur batteries[J]. Chem. Eng. J., 2021, 407: 127149. doi: 10.1016/j.cej.2020.127149 URL
[44]	Wu Z J, Xie Z K, Yoshida A, An X W, Wang Z D, Hao X G, Abudula A, Guan G Q. Novel SeS₂ doped Li₂S-P₂S₅ solid electrolyte with high ionic conductivity for all-solid-state lithium sulfur batteries[J]. Chem. Eng. J., 2020, 380: 122419. doi: 10.1016/j.cej.2019.122419 URL
[45]	Yu C, Hageman J, Ganapathy S, van Eijck L, Zhang L, Adair K R, Sun X L, Wagemaker M. Tailoring Li₆PS₅Br ionic conductivity and understanding of its role in cathode mixtures for high performance all-solid-state Li-S batteries[J]. J. Mater. Chem. A, 2019, 7(17): 10412-10421. doi: 10.1039/C9TA02126D URL
[46]	Zhou L, Tufail M K, Ahmad N, Song T L, Chen R J, Yang W. Strong interfacial adhesion between the Li₂S cathode and a functional Li₇P_2.9Ce_0.2S_10.9Cl_0.3 solid-state electrolyte endowed long-term cycle stability to all-solid-state lithium-sulfur batteries[J]. ACS Appl. Mater. Inter., 2021, 13(24): 28270-28280. doi: 10.1021/acsami.1c06328 URL
[47]	Wei C C, Yu C, Peng L F, Zhang Z Q, Xu R N, Wu Z K, Liao C, Zhang W, Zhang L, Cheng S J, Xie J. Tuning ionic conductivity to enable all-climate solid-state Li-S batteries with superior performances[J]. Mater. Adv., 2022, 3(2): 1047-1054. doi: 10.1039/D1MA00987G URL
[48]	Zhu Y Z, He X F, Mo Y F. Origin of outstanding stability in the lithium solid electrolyte materials: Insights from thermodynamic analyses based on first-principles calculations[J]. ACS Appl. Mater. Inter., 2015, 7(42): 23685-23693. doi: 10.1021/acsami.5b07517 URL
[49]	Han F D, Zhu Y Z, He X F, Mo Y F, Wang C S. Electrochemical stability of Li₁₀GeP₂S₁₂ and Li₇La₃Zr₂O₁₂solid electrolytes[J]. Adv. Energy Mater., 2016, 6(8): 1501590. doi: 10.1002/aenm.201501590 URL
[50]	Bai X T, Yu T W, Ren Z M, Gong S M, Yang R, Zhao C R. Key issues and emerging trends in sulfide all solid state lithium battery[J]. Energy Storage Mater., 2022, 51: 527-549.
[51]	Zhang Z X, Zhang L, Yan X L, Wang H Q, Liu Y Y, Yu C, Cao X T, van Eijck L, Wen B. All-in-one improvement toward Li₆PS₅Br-based solid electrolytes triggered by compositional tune[J]. J. Power Sources, 2019, 410: 162-170.
[52]	Wu F, Fitzhugh W, Ye L H, Ning J X, Li X. Advanced sulfide solid electrolyte by core-shell structural design[J]. Nat. Commun., 2018, 9: 4037. doi: 10.1038/s41467-018-06123-2 pmid: 30279498
[53]	Nikodimos Y, Huang C J, Taklu B W, Su W N, Hwang B J. Chemical stability of sulfide solid-state electrolytes: Stability toward humid air and compatibility with solvents and binders[J]. Energy Environ. Sci., 2022, 15(3): 991-1033. doi: 10.1039/D1EE03032A URL
[54]	Jiang Z, Peng H L, Liu Y, Li Z X, Zhong Y, Wang X L, Xia X H, Gu C D, Tu J P. A versatile Li_6.5In_0.25P_0.75S₅I sulfide electrolyte triggered by ultimate-energy mechanical alloying for all-solid-state lithium metal batteries[J]. Adv. Energy Mater., 2021, 11(36): 2101521. doi: 10.1002/aenm.v11.36 URL
[55]	Tufail M K, Ahmad N, Zhou L, Faheem M, Yang L, Chen R J, Yang W. Insight on air-induced degradation mechanism of Li₇P₃S₁₁ to design a chemical-stable solid electrolyte with high Li₂S utilization in all-solid-state Li/S batteries[J]. Chem. Eng. J., 2021, 425: 130535. doi: 10.1016/j.cej.2021.130535 URL
[56]	Yao X Y, Huang N, Han F D, Zhang Q, Wan H L, Mwizerwa J P, Wang C S, Xu X X. High-performance all-solid-state lithium-sulfur batteries enabled by amorphous sulfur-coated reduced graphene oxide cathodes[J]. Adv. Energy Mater., 2017, 7(17): 1602923. doi: 10.1002/aenm.v7.17 URL
[57]	Wang S, Bai Q, Nolan A M, Liu Y S, Gong S, Sun Q, Mo Y F. Lithium chlorides and bromides as promising solid-state chemistries for fast ion conductors with good electrochemical stability[J]. Angew. Chem. Int. Edit., 2019, 58(24): 8039-8043. doi: 10.1002/anie.v58.24 URL
[58]	Emly A, Kioupakis E, Van der Ven A. Phase stability and transport mechanisms in antiperovskite Li₃OCl and Li₃OBr superionic conductors[J]. Chem. Mat., 2013, 25(23): 4663-4670. doi: 10.1021/cm4016222 URL
[59]	Shi X M, Zeng Z C, Sun M Z, Huang B L, Zhang H T, Luo W, Huang Y H, Du Y P, Yan C H. Fast Li-ion conductor of Li₃HoBr₆ for stable all-solid-state lithium-sulfur battery[J]. Nano Lett., 2021, 21(21): 9325-9331. doi: 10.1021/acs.nanolett.1c03573 URL
[60]	Han F D, Yue J, Fan X L, Gao T, Luo C, Ma Z H, Suo L M, Wang C S. High-performance all-solid-state lithium-sulfur battery enabled by a mixed-conductive Li₂S nanocomposite[J]. Nano Lett., 2016, 16(7): 4521-4527. doi: 10.1021/acs.nanolett.6b01754 pmid: 27322663
[61]	Zhang Q, Huang N, Huang Z, Cai L T, Wu J H, Yao X Y. CNTs@S composite as cathode for all-solid-state lithium-sulfur batteries with ultralong cycle life[J]. J. Energy Chem., 2020, 40: 151-155. doi: 10.1016/j.jechem.2019.03.006 URL
[62]	Hou L P, Yuan H, Zhao C Z, Xu L, Zhu G L, Nan H X, Cheng X B, Liu Q B, He C X, Huang J Q, Zhang Q. Improved interfacial electronic contacts powering high sulfur utilization in all-solid-state lithium-sulfur batteries[J]. Energy Storage Mater., 2020, 25: 436-442.
[63]	Li X N, Liang J W, Luo J, Wang C H, Li X, Sun Q, Li R Y, Zhang L, Yang R, Lu S G, Huang H, Sun X L. High-performance Li-SeS_x all-solid-state lithium batteries[J]. Adv. Mater., 2019, 31(17): 1808100. doi: 10.1002/adma.v31.17 URL
[64]	Tanibata N, Tsukasaki H, Deguchi M, Mori S, Hayashi A, Tatsumisago M. A novel discharge-charge mechanism of a S-P₂S₅ composite electrode without electrolytes in all-solid-state Li/S batteries[J]. J. Mater. Chem. A, 2017, 5(22): 11224-11228. doi: 10.1039/C7TA01481C URL
[65]	Yao X Y, Liu D, Wang C S, Long P, Peng G, Hu Y S, Li H, Chen L Q, Xu X X. High-energy all-solid-state lithium batteries with ultralong cycle life[J]. Nano Lett., 2016, 16(11): 7148-7154. pmid: 27766883
[66]	Sun X, Li Q, Cao D X, Wang Y, Anderson A, Zhu H L. High surface area N-doped carbon fibers with accessible reaction sites for all-solid-state lithium-sulfur batteries[J]. Small, 2022, 18(6): 2105678. doi: 10.1002/smll.v18.6 URL
[67]	Wang L, Yin X S, Li B, Zheng G W. Mixed ionically/electronically conductive double-phase interface enhanced solid-state charge transfer for a high-performance all-solid-state Li-S battery[J]. Nano Lett., 2022, 22(1): 433-440. doi: 10.1021/acs.nanolett.1c04228 URL
[68]	Sakuda A, Sato Y, Hayashi A, Tatsumisago M. Sulfur-based composite electrode with interconnected mesoporous carbon for all-solid-state lithium-sulfur batteries[J]. Energy Technol., 2019, 7(12): 1900077. doi: 10.1002/ente.v7.12 URL
[69]	Dewald G F, Ohno S, Hering J G C, Janek J, Zeier W G. Analysis of charge carrier transport toward optimized cathode composites for all-solid-state Li-S batteries[J]. Batteries Supercaps, 2021, 4(1): 183-194. doi: 10.1002/batt.v4.1 URL
[70]	Liu Y Z, Meng X Y, Wang Z Y, Qiu J S. A Li₂S-based all-solid-state battery with high energy and superior safety[J]. Sci. Adv., 2022, 8(1): eabl8390. doi: 10.1126/sciadv.abl8390 URL
[71]	Gamo H, Maeda T, Hikima K, Deguchi M, Fujita Y, Kawasaki Y, Sakuda A, Muto H, Phuc NHH, Hayashi A. Synthesis of an AlI₃-doped Li₂S positive electrode with superior performance in all-solid-state batteries[J]. Mater. Adv., 2022, 3(5): 2488-2494. doi: 10.1039/D1MA01228B URL
[72]	He Y M, Chen W J, Zhao Y M, Li Y F, Lv C Y, Li H X, Yang J G, Gao Z L, Luo J Y. Recent developments and progress of halogen elements in enhancing the performance of all-solid-state lithium metal batteries[J]. Energy Storage Mater., 2022, 49: 19-57.
[73]	Wan H L, Zhang B, Liu S F, Zhang J X, Yao X Y, Wang C S. Understanding LiI-LiBr catalyst activity for solid state Li₂S/S reactions in an all-solid-state lithium battery[J]. Nano Lett., 2021, 21(19): 8488-8494. doi: 10.1021/acs.nanolett.1c03415 URL
[74]	Jiang M, Liu G Z, Zhang Q, Zhou D, Yao X Y. Ultrasmall Li₂S-carbon nanotube nanocomposites for high-rate all-solid-state lithium-sulfur batteries[J]. ACS Appl. Mater. Inter., 2021, 13(16): 18666-18672. doi: 10.1021/acsami.1c00511 URL
[75]	Jiang H Z, Han Y, Wang H, Zhu Y H, Guo Q P, Jiang H L, Zheng C M, Xie K. Facile synthesis of a mixed-conductive Li₂S composites for all-solid-state lithium-sulfur batteries[J]. Ionics, 2020, 26(9): 4257-4265. doi: 10.1007/s11581-020-03591-9
[76]	Wang D H, Wu Y Q, Zheng X F, Tang S J, Gong Z L, Yang Y. Li₂S @NC composite enable high active material loading and high Li₂S utilization for all-solid-state lithium sulfur batteries[J]. J. Power Sources, 2020, 479: 228792. doi: 10.1016/j.jpowsour.2020.228792 URL
[77]	Gao X, Zheng X L, Wang J Y, Zhang Z W, Xiao X, Wan J Y, Ye Y S, Chou L Y, Lee H K, Wang J Y, Vila R A, Yang Y F, Zhang P, Wang LW, Cui Y. Incorporating the nanoscale encapsulation concept from liquid electrolytes into solid-state lithium-sulfur batteries[J]. Nano Lett., 2020, 20(7): 5496-5503. doi: 10.1021/acs.nanolett.0c02033 pmid: 32515973
[78]	Yan H F, Wang H C, Wang D H, Li X, Gong Z L, Yang Y. In situ generated Li₂S -C nanocomposite for high-capacity and long-life all-solid-state lithium sulfur batteries with ultrahigh areal mass loading[J]. Nano Lett., 2019, 19(5): 3280-3287. doi: 10.1021/acs.nanolett.9b00882 URL
[79]	Jiang H Z, Han Y, Wang H, Zhu Y H, Guo Q P, Jiang H L, Sun W W, Zheng C M, Xie K. In-situ generated Li₂S-based composite cathodes with high mass and capacity loading for all-solid-state Li-S batteries[J]. J. Alloy. Compd., 2021, 874: 159763. doi: 10.1016/j.jallcom.2021.159763 URL
[80]	El-Shinawi H, Cussen E J, Corr S A. A facile synthetic approach to nanostructured Li₂S cathodes for rechargeable solid-state Li-S batteries[J]. Nanoscale, 2019, 11(41): 19297-19300. doi: 10.1039/c9nr06239d pmid: 31620760
[81]	Li M Y, Pan H Y, Liu T, Xiong X L, Yu X Q, Hu Y S, Li H, Huang X J, Suo L M, Chen L Q. All-in-one ionic-electronic dual-carrier conducting framework thickening all-solid-state electrode[J]. ACS Energy Lett., 2022, 7(2): 766-772. doi: 10.1021/acsenergylett.1c02666 URL
[82]	Wan H L, Liu G Z, Li Y L, Weng W, Mwizerwa J P, Tian Z Q, Chen L, Yao X Y. Transitional metal catalytic pyrite cathode enables ultrastable four-electron-based all-solid-state lithium batteries[J]. ACS Nano, 2019, 13(8): 9551-9560. doi: 10.1021/acsnano.9b04538 pmid: 31398005
[83]	Xu S Q, Kwok C Y, Zhou L D, Zhang Z Z, Kochetkov I, Nazar L F. A high capacity all solid-state Li-sulfur battery enabled by conversion-intercalation hybrid cathode architecture[J]. Adv. Funct. Mater., 2021, 31(2): 2004239. doi: 10.1002/adfm.v31.2 URL
[84]	Santhosha A L, Nazer N, Koerver R, Randau S, Richter F H, Weber D A, Kulisch J, Adermann T, Janek J, Adelhelm P. Macroscopic displacement reaction of copper sulfide in lithium solid-state batteries[J]. Adv. Energy Mater., 2020, 10(41): 2002394. doi: 10.1002/aenm.v10.41 URL
[85]	Zhang Q, Ding Z G, Liu G Z, Wan H L, Mwizerwa J P, Wu J H, Yao X Y. Molybdenum trisulfide based anionic redox driven chemistry enabling high-performance all-solid-state lithium metal batteries[J]. Energy Storage Mater., 2019, 23: 168-180.
[86]	Dewald G F, Liaqat Z, Lange M A, Tremel W, Zeier W G. Influence of iron sulfide nanoparticle sizes in solid-state batteries[J]. Angew. Chem. Int. Edit., 2021, 60(33): 17952-17956. doi: 10.1002/anie.v60.33 URL
[87]	Santhosha A L, Nayak P K, Pollok K, Langenhorst F, Adelhelm P. Exfoliated MoS₂ as electrode for all-solid-state rechargeable lithium-ion batteries[J]. J. Phys. Chem. C, 2019, 123(19): 12126-12134. doi: 10.1021/acs.jpcc.9b01816
[88]	Yamakawa N, Jiang M, Grey C P. Investigation of the conversion reaction mechanisms for binary copper(II) compounds by solid-state NMR spectroscopy and X-ray diffraction[J]. Chem. Mat., 2009, 21(14): 3162-3176. doi: 10.1021/cm900581b URL
[89]	Hosseini S M, Varzi A, Ito S, Aihara Y, Passerini S. High loading CuS-based cathodes for all-solid-state lithium sulfur batteries with enhanced volumetric capacity[J]. Energy Storage Mater., 2020, 27: 61-68.
[90]	Pan H, Zhang M H, Cheng Z, Jiang H Y, Yang J G, Wang P F, He P, Zhou H S. Carbon-free and binder-free Li-Al alloy anode enabling an all-solid-state Li-S battery with high energy and stability[J]. Sci. Adv., 2022, 8(15): eabn4372. doi: 10.1126/sciadv.abn4372 URL
[91]	Tan D H S, Chen Y T, Yang H D, Bao W, Sreenarayanan B, Doux J M, Li W K, Lu B Y, Ham S Y, Sayahpour B, Scharf J, Wu E A, Deysher G, Han H E, Hah H J, Jeong H, Lee J B, Chen Z, Meng Y S. Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes[J]. Science, 2021, 373(6562): 1494-1499. doi: 10.1126/science.abg7217 pmid: 34554780
[92]	Chen Z R, Liang Z T, Zhong H Y, Su Y, Wang K J, Yang Y. Bulk/interfacial synergetic approaches enable the stable anode for high energy density all-solid-state lithium-sulfur batteries[J]. ACS Energy Lett., 2022, 7(8): 2761-2770. doi: 10.1021/acsenergylett.2c01334 URL
[93]	Shin M, Gewirth A A. Incorporating solvate and solid electrolytes for all-solid-state Li₂S batteries with high capacity and long cycle life[J]. Adv. Energy Mater., 2019, 9(26): 1900938. doi: 10.1002/aenm.v9.26 URL
[94]	Sun X, Stavola A M, Cao D X, Bruck A M, Wang Y, Zhang Y L, Luan P C, Gallaway J W, Zhu H L. Operando EDXRD study of all-solid-state lithium batteries coupling thioantimonate superionic conductors with metal sulfide[J]. Adv. Energy Mater., 2021, 11(3): 2002861. doi: 10.1002/aenm.v11.3 URL
[95]	Liu M, Wang C, Zhao C L, van der Maas E, Lin K, Arszelewska V A, Li B H, Ganapathy S, Wagemaker M. Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements[J]. Nat. Commun., 2021, 12(1): 5943. doi: 10.1038/s41467-021-26190-2 pmid: 34642334
[96]	Umeshbabu E, Zheng B Z, Zhu J P, Wang H C, Li Y X, Yang Y. Stable cycling lithium-sulfur solid batteries with enhanced Li/Li₁₀GeP₂S₁₂ solid electrolyte interface stability[J]. ACS Appl. Mater. Inter., 2019, 11(20): 18436-18447. doi: 10.1021/acsami.9b03726
[97]	Lou S F, Zhang F, Fu C K, Chen M, Ma Y L, Yin G P, Wang J J. Interface issues and challenges in all-solid-state batteries: Lithium, sodium, and beyond[J]. Adv. Mater., 2021, 33(6): 2000721. doi: 10.1002/adma.v33.6 URL
[98]	Wan H L, Mwizerwa J P, Qi X G, Liu X, Xu X X, Li H, Hu Y S, Yao X Y. Core-shell Fe_1-xS@Na_2.9PS_3.95Se_0.05 nanorods for room temperature all-solid-state sodium batteries with high energy density[J]. ACS Nano, 2018, 12(3): 2809-2817. doi: 10.1021/acsnano.8b00073 URL
[99]	Shi J M, Liu G Z, Weng W, Cai L T, Zhang Q, Wu J H, Xu X X, Yao X Y. Co₃S₄@Li₇P₃S₁₁ hexagonal platelets as cathodes with superior interfacial contact for all-solid-state lithium batteries[J]. ACS Appl. Mater. Inter., 2020, 12(12): 14079-14086. doi: 10.1021/acsami.0c02085 URL
[100]	Xu R C, Wang X L, Zhang S Z, Xia Y, Xia X H, Wu J B, Tu J P. Rational coating of Li₇P₃S₁₁ solid electrolyte on MoS₂ electrode for all-solid-state lithium ion batteries[J]. J. Power Sources, 2018, 374: 107-112. doi: 10.1016/j.jpowsour.2017.10.093 URL
[101]	Sun N, Liu Q S, Cao Y, Lou S F, Ge M Y, Xiao X H, Lee W K, Gao Y Z, Yin G P, Wang J J, Sun X L. Anisotropically electrochemical-mechanical evolution in solid-state batteries and interfacial tailored strategy[J]. Angew. Chem. Int. Edit., 2019, 58(51): 18647-18653. doi: 10.1002/anie.v58.51 URL
[102]	Xu J, Liu L, Yao N, Wu F, Li H, Chen L. Liquid-involved synthesis and processing of sulfide-based solid electrolytes, electrodes, and all-solid-state batteries[J]. Mater. Today Nano, 2019, 8: 100048.
[103]	Cao Y, Zuo P J, Lou S F, Sun Z, Li Q, Huo H, Ma Y L, Du C Y, Gao Y Z, Yin G P. A quasi-solid-state Li-S battery with high energy density, superior stability and safety[J]. J. Mater. Chem. A, 2019, 7(11): 6533-6542. doi: 10.1039/c9ta00146h
[104]	Lou S F, Liu Q W, Zhang F, Liu Q S, Yu Z J, Mu T S, Zhao Y, Borovilas J, Chen Y J, Ge M Y, Xiao X H, Lee W K, Yin G P, Yang Y, Sun X L, Wang J J. Insights into interfacial effect and local lithium-ion transport in polycrystalline cathodes of solid-state batteries[J]. Nat. Commun., 2020, 11(1): 5700. doi: 10.1038/s41467-020-19528-9 pmid: 33177510
[105]	Zhu C B, Usiskin R E, Yu Y, Maier J. The nanoscale circuitry of battery electrodes[J]. Science, 2017, 358(6369): eaao2808. doi: 10.1126/science.aao2808 URL
[106]	Hakari T, Fujita Y, Deguchi M, Kawasaki Y, Otoyama M, Yoneda Y, Sakuda A, Tatsumisago M, Hayashi A. Solid electrolyte with oxidation tolerance provides a high-capacity Li₂S-based positive electrode for all-solid-state Li/S batteries[J]. Adv. Funct. Mater., 2022, 32(5): 2106174. doi: 10.1002/adfm.v32.5 URL
[107]	Kim S, Oguchi H, Toyama N, Sato T, Takagi S, Otomo T, Arunkumar D, Kuwata N, Kawamura J, Orimo S. A complex hydride lithium superionic conductor for high-energy-density all-solid-state lithium metal batteries[J]. Nat. Commun., 2019, 10: 1081. doi: 10.1038/s41467-019-09061-9 pmid: 30842419
[108]	Kisu K, Kim S, Yoshida R, Oguchi H, Toyama N, Orimo S. Microstructural analyses of all-solid-state Li-S batteries using LiBH₄-based solid electrolyte for prolonged cycle performance[J]. J. Energy Chem., 2020, 50: 424-429. doi: 10.1016/j.jechem.2020.03.069 URL
[109]	Ruan Y D, Lu Y, Huang X, Su J M, Sun C Z, Jin J, Wen Z Y. Acid induced conversion towards a robust and lithiophilic interface for Li-Li₇La₃Zr₂O₁₂ solid-state batteries[J]. J. Mater. Chem. A, 2019, 7(24): 14565-14574. doi: 10.1039/C9TA01911A URL
[110]	Bosubahu D, Sivaraj J, Sampathkumar R, Ramesha K. Lagpili interface modification through a wetted polypropylene interlayer for solid state Li-ion and Li-S batteries[J]. ACS Appl. Energ. Mater., 2019, 2(6): 4118-4125.
[111]	Judez X, Eshetu G G, Gracia I, Lopez-Aranguren P, Gonzalez-Marcos J A, Armand M, Rodriguez-Martinez L M, Zhang H, Li C M. Understanding the role of nano-aluminum oxide in all-solid-state lithium-sulfur batteries[J]. ChemElectroChem, 2019, 6(2): 326-330. doi: 10.1002/celc.v6.2 URL
[112]	Yin X S, Wang L, Kim Y, Ding N, Kong J H, Safanama D, Zheng Y, Xu J W, Repaka D V M, Hippalgaonkar K, Lee S W, Adams S, Zheng G W. Thermal conductive 2D boron nitride for high-performance all-solid-state lithium-sulfur batteries[J]. Adv. Sci., 2020, 7(19): 2001303. doi: 10.1002/advs.v7.19 URL
[113]	Fan Z J, Ding B, Zhang T F, Lin Q Y, Malgras V, Wang J, Dou H, Zhang X G, Yamauchi Y. Solid/solid interfacial architecturing of solid polymer electrolyte-based all-solid-state lithium-sulfur batteries by atomic layer deposition[J]. Small, 2019, 15(46): 1903952. doi: 10.1002/smll.v15.46 URL
[114]	Li J, Huo F, Chen T H, Yan H W, Yang Y X, Zhang S J, Chen S M. In-situ construction of stable cathode/Li interfaces simultaneously via different electron density AZO compounds for solid-state lithium metal batteries[J]. Energy Storage Mater., 2021, 40: 394-401.

固态锂硫电池研究进展

Recent Research Progresses of Solid-State Lithium-Sulfur Batteries

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 8

参考文献 114

相关文章 15

Metrics

[1]	杨云锐, 董欢欢, 郝志强, 何祥喜, 杨卓, 李林, 侴术雷. 高性能锂硫电池用钴/碳复合材料硫宿主[J]. 电化学（中英文）, 2023, 29(4): 2217003-.
[2]	张修庆, 唐帅, 付永柱. 锂硫电池电解液功能性添加剂研究进展[J]. 电化学（中英文）, 2023, 29(4): 2217005-.
[3]	李莎, 湛孝, 王顾莲, 王慧群, 熊伟明, 张力. 紫外光引发原位交联多功能粘结剂构筑稳固硫正极[J]. 电化学（中英文）, 2023, 29(4): 2217004-.
[4]	化五星, 夏静怡, 胡忠豪, 李欢, 吕伟, 杨全红. 多活性中心双金属硫化物促进多硫化锂转化构建高性能锂硫电池[J]. 电化学（中英文）, 2023, 29(3): 2217006-.
[5]	王妍洁, 程宏宇, 侯冀岳, 杨文豪, 黄荣威, 倪志聪, 朱子翼, 王颖, 韦克毅, 张义永, 李雪. CoNi基双金属-有机骨架衍生碳复合材料多功能改性锂硫电池隔膜[J]. 电化学（中英文）, 2023, 29(3): 2217002-.
[6]	贾欢欢, 胡晨吉, 张熠霄, 陈立桅. 固态锂硫电池综述：从硫正极转化机制到电池的工程化设计[J]. 电化学（中英文）, 2023, 29(3): 2217008-.
[7]	谷宇, 胡元飞, 王卫伟, 尤恩铭, 唐帅, 苏建加, 易骏, 颜佳伟, 田中群, 毛秉伟. 碳酸酯类电解液中纳米银电极界面过程的原位拉曼光谱研究[J]. 电化学（中英文）, 2023, 29(12): 2301261-.
[8]	姬璇, 汪佳裕, 王安邦, 王维坤, 姚明, 黄雅钦. 锂硫电池用高度环化硫化聚丙烯腈的制备[J]. 电化学（中英文）, 2022, 28(12): 2219010-.
[9]	李西尧, 赵长欣, 李博权, 黄佳琦, 张强. 锂硫电池复合正极研究进展[J]. 电化学（中英文）, 2022, 28(12): 2219013-.
[10]	侯廷政, 陈翔, 蒋璐, 唐城. 当前和下一代锂离子电池电解液的原子尺度微观认识和研究进展[J]. 电化学（中英文）, 2022, 28(11): 2219007-.
[11]	汪佳裕, 仝学锋, 彭启繁, 关越鹏, 王维坤, 王安邦, 刘乃强, 黄雅钦. 用纳米羟基磷灰石@多孔碳构建锂硫电池高效反应界面[J]. 电化学（中英文）, 2022, 28(11): 2219008-.
[12]	赵桂香, Wail Hafiz Zaki Ahmed, 朱福良. 氮硫共掺杂多孔碳材料的制备及其在锂硫电池中的应用[J]. 电化学（中英文）, 2021, 27(6): 614-623.
[13]	王东浩, 晏鹤凤, 龚正良. 复合导电添加剂对全固态锂硫电池性能影响的研究[J]. 电化学（中英文）, 2021, 27(4): 388-395.
[14]	范业鹏, 罗业强, 沈培康. MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究[J]. 电化学（中英文）, 2021, 27(4): 377-387.
[15]	张丙凯, 杨卢奕, 李舜宁, 潘锋. 固态电解质中锂离子传输机理研究进展[J]. 电化学（中英文）, 2021, 27(3): 269-277.