一种新型的碳复合钼掺杂的钒氧化物纳米线钠离子电池正极材料

doi:10.13208/j.electrochem.160428

摘要/Abstract

摘要：

近年来，由于锂资源逐渐紧缺而导致其成本增加，锂离子电池发展受到了限制. 作为一个有潜力的替代者，有着相似电化学机制且成本较低的钠离子电池则发展迅速. 但由于钠离子与锂离子相较有着更大半径，在钠离子脱嵌过程中，对大多数电极材料的晶体结构破坏严重. 因此，开发新型电极材料对钠离子电池的进一步发展尤为重要. 其中，层状钒氧化物作为正极材料被广泛研究. 在这项工作中，作者基于钒氧化物，引入钼元素并与碳复合，首次设计合成了一种新型的碳复合钼掺杂的钒氧化物纳米线电极材料，并获得了优良的电化学性能（在50 mA•g^-1的电流密度下，最高放电比容量达135.9 mAh•g^-1，并在循环75次后仍有82.6 mAh•g^-1的可逆容量，容量保持率高达71.8%；在1000 mA•g^-1的高电流密度下循环并回到50 mA•g^-1后，可逆放电比容量仍能回复至111.5 mAh•g^-1）. 本工作的研究结果证明，这种具有超大层间距的新型碳复合钼掺杂的钒氧化物纳米线是一种非常有潜力的储钠材料，并且我们的工作为钠离子电池的进一步发展提供了一定的理论基础.

关键词: 钠离子电池, 正极材料, 钼钒氧化物, 碳复合, 纳米线

Abstract: In recent years, the development of lithium ion batteries (LIBs) has been limited due to the insufficient lithium resource and increasing cost. As a promising candidate, sodium ion batteries (SIBs) with the similar electrochemical mechanism and lower cost than LIBs are developing rapidly. However, as a result of the larger radius of Na⁺ compared with Li⁺, the crystalline structures of the most electrode materials are damaged severely during the intercalation of Na⁺, which limits the electrochemical properties of SIBs. Thus, developing new types of electrode materials for SIBs is particularly important. Among the cathode materials, the layered vanadium oxides are being widely studied. In this work, for the first time, we designed and synthesized a new type of carbon composited molybdenum doped vanadium oxide nanowires (MVO/C) with the excellent electrochemical performances. The highest capacity reached 135.9 mAh•g^-1under 50 mA•g^-1. After 75 cycles, there was still 82.6 mAh•g^-1 with 71.8% capacity remaining. When the current density was first increased to 1000 mA•g^-1 and then went back to 50 mA•g^-1, a high reversible capacity of 111.5 mAh•g^-1 was obtained. The results demonstrated that the new type of carbon composited molybdenum doped vanadium oxide nanowires with a ultra-high interlayer spacing is a promising material for sodium storage, providing a theoretical foundation for the further development of SIBs.

Key words: sodium ion batteries, cathode materials, molybdenum-vanadium oxides, carbon compositing, nanowires

中图分类号:

O646
TM152

张广瑞，胡利强，张宝珠. 一种新型的碳复合钼掺杂的钒氧化物纳米线钠离子电池正极材料[J]. 电化学（中英文）, 2017, 23(4): 456-465.

ZHANG Guang-rui, HU Li-qiang, ZHANG Bao-zhu. A New Type Carbon Composited Molybdenum Doped Vanadium Oxide Nanowires as a Cathode Material for Sodium Ion Batteries[J]. Journal of Electrochemistry, 2017, 23(4): 456-465.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.13208/j.electrochem.160428

https://electrochem.xmu.edu.cn/CN/Y2017/V23/I4/456

参考文献

[1] Tarascon J M, Armand M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414(6861):359-367.

[2] Bruce P G, Freunberger S A, Hardwick L J, et al. Li-O₂ and Li-S batteries with high energy storage[J]. Nature Materials, 2012, 11(1):19-29.

[3] Recham N, Chotard J N, Dupont L, et al. A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries[J]. Nature Material, 2010, 9(1):68-74.

[4] Kang K, Meng Y S, Breger J, et al. Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries[J]. Science, 2006, 311(5763):977-980.

[5] Wang H. Ultrathin Na_1.08V₃O₈ nanosheets-a novel cathode material with superior rate capability and cycling stability for Li-ion batteries[J]. Energy & Environmental Science, 2012, 5(5):6173-6179.

[6] Wang S, Li S, Sun Y, et al. Three-dimensional porous V₂O₅ cathode with ultra high rate capability[J]. Energy & Environmental Science, 2011, 4(8):2854-2857.

[7] Shubin Y, Xinliang F, Klaus M. Sandwich-like, graphene-based titania nanosheets with high surface area for fast lithium storage[J]. Advanced Materials, 2011, 23(31):3575-3579.

[8] Wu H, Chan G, Choi J W, et al. Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control[J]. Nature Nanotechnology, 2012, 7(5):310-315.

[9] Hong S Y, Kim Y, Park Y, et al. ChemInform Abstract: Charge Carriers in Rechargeable Batteries: Na Ions vs. Li Ions[J]. Energy & Environmental Science, 2013, 6(7):2067-2081.

[10] Ellis B L, Nazar L F. Sodium and sodium-ion energy storage batteries[J]. Current Opinion in Solid State & Materials Science, 2012, 16(4):168-177.

[11] Li H, Wu C, Wu F, et al. Sodium Ion Battery: A Promising Energy-storage Candidate for Supporting Renewable Electricity[J]. Acta Chimica Sinica, 2014, 72(1):21-29.

[12] Palomares V, Serras P, Villaluenga I, et al. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems[J]. Energy & Environmental Science, 2012, 5(3):5884-5901.

[13] Kim S W, Seo D H, Ma X, et al. Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries[J]. Advanced Energy Materials, 2012, 2(7):710–721.

[14] Ong S P, Chevrier V L, Hautier G, et al. Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials[J]. Energy & Environmental Science, 2011, 4(9):3680-3688.

[15] Liu J, Zhang J G, Yang Z, et al. Materials Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid[J]. Advanced Functional Materials, 2013, 23(8):929–946.

[16] Yan Y, Mcdowell M T, Ill R, et al. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life[J]. Nano Letters, 2011, 11(7):2949-2954.

[17] Fergus J W. Recent developments in cathode materials for lithium ion batteries[J]. Journal of Power Sources, 2010, 195(4):939-954.

[18] Chao D, Xia X, Liu J, et al. Lithium-Ion Batteries: A V₂O₅/Conductive-Polymer Core/Shell Nanobelt Array on Three-Dimensional Graphite Foam: A High-Rate, Ultrastable, and Freestanding Cathode for Lithium-Ion Batteries [J]. Advanced Materials, 2014, 26(33):5794-5800.

[19] Chunnian H, Shan W, Naiqin Z, et al. Carbon-encapsulated Fe₃O₄ nanoparticles as a high-rate lithium ion battery anode material[J]. Acs Nano, 2013, 7(5):4459-4469.

[20] Raju V, Rains J, Gates C, et al. Superior Cathode of Sodium-Ion Batteries: Orthorhombic V₂O₅ Nanoparticles Generated in Nanoporous Carbon by Ambient Hydrolysis Deposition[J]. Nano Letters, 2014, 14(7):4119-4124.

[21] Wang Y, Cao G. Developments in Nanostructured Cathode Materials for High-Performance Lithium-Ion Batteries[J]. Advanced Materials, 2008, 20(12):2251–2269.

[22] Mai L, Xu X, Han C, et al. Rational synthesis of silver vanadium oxides/polyaniline triaxial nanowires with enhanced electrochemical property[J]. Nano Letters, 2011, 11(11):4992-4996.

[23] Zheng C, Qin Y, Ding W, et al. Design and Synthesis of Hierarchical Nanowire Composites for Electrochemical Energy Storage[J]. Advanced Functional Materials, 2009, 19(21):3420–3426.

[24] Ying W, Katsunori T, Huamei S, et al. Synthesis and electrochemical properties of vanadium pentoxide nanotube arrays[J]. Journal of Physical Chemistry B, 2005, 109(8):3085-3088.

[25] Xiujuan W, Qinyou A, Qiulong W, et al. A Bowknot-like RuO₂ quantum dots@V₂O₅ cathode with largely improved electrochemical performance[J]. Physical Chemistry Chemical Physics, 2014, 16(35):18680-18685.

[26] Wei Q, Jiang Z, Tan S, et al. Lattice Breathing Inhibited Layered Vanadium Oxide Ultrathin Nanobelts for Enhanced Sodium Storage[J]. ACS Applied Materials & Interfaces, 2015, 7(33):18211−18217.

[27] Muller-Bouvet D, Baddour-Hadjean R, Tanabe M, et al. Electrochemically formed α-NaV₂O₅: A new sodium intercalation compound[J]. Electrochimica Acta, 2015, 176:586-593.

[28] Zhu K, Zhang C, Guo S, et al. Sponge-Like Cathode Material Self-Assembled from Two-Dimensional V₂O₅ Nanosheets for Sodium-Ion Batteries[J]. Chemelectrochem, 2015, 2(11):1660-1664.

[29] Wang X, Li G, Hassan F M, et al. Sulfur covalently bonded graphene with large capacity and high rate for high-performance sodium-ion batteries anodes[J]. Nano Energy, 2015, 15:746-754.

[30] Lux S F, Placke T, Engelhardt C, et al. Enhanced Electrochemical Performance of Graphite Anodes for Lithium-Ion Batteries by Dry Coating with Hydrophobic Fumed Silica[J]. Journal of the Electrochemical Society, 2012, 159(11):A1849-A1855.

[31] Sun C, Deng Y, Wan L, et al. Graphene Oxide-Immobilized NH₂-Terminated Silicon Nanoparticles by Cross-Linked Interactions for Highly Stable Silicon Negative Electrodes[J]. ACS Applied Materials & Interfaces, 2014, 6(14):11277-11285.

[32] Kim H, Dong J K, Seo D H, et al. Ab Initio Study of the Sodium Intercalation and Intermediate Phases in Na_0.44MnO₂ for Sodium-Ion Battery[J]. Chemistry of Materials, 2012, 24(6):1205-1211.

[33] Shen W, Li H, Wang C. Improved electrochemical performance of the Na₃V₂(PO₄)₃ cathode by B-doping of the carbon coating layer for sodium-ion batteries[J]. Journal of Materials Chemistry A, 2015, 3(29):15190-15201.

[34] Zhang C X. Electrochemical Characteristics of C-doped NaVPO₄F Cathode Material for Sodium-ion Battery[J]. Chinese Journal of Inorganic Chemistry, 2007, 23(4):649-654.

[35] Yang Y. Carbon dots supported upon N-doped TiO₂ nanorods applied into sodium and lithium ion batteries[J]. Journal of Materials Chemistry A, 2015, 3(10):5648-5655.

[36] Simeone R, Misztal I, Aguilar I, et al. Evaluation of the utility of diagonal elements of the genomic relationship matrix as a diagnostic tool to detect mislabelled genotyped animals in a broiler chicken population[J]. Journal of Animal Breeding & Genetics, 2011, 128(5):386–393.

[37] Pouchko S V, Ivanov-Schitz A K. Lithium insertion into γ-type vanadium oxide bronzes doped with molybdenum(VI) and tungsten(VI) ions[J]. Solid State Ionics, 2001, 144(1):151-161.

[38] Li Y M, Hibino M, Tanaka Y, et al. Evaluation of Mo-doped amorphous V₂O₅ films as a positive electrode for lithium batteries[J]. Solid State Ionics, 2001, 143(1):67-72.

[39] Jiang Y, Yang Z, Li W, et al. Nanoconfined Carbon-Coated Na₃V₂(PO₄)₃ Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium-Ion Batteries[J]. Advanced Energy Materials, 2015, 5(10):1402104.

[40] Park D Y, Myung S T. Carbon-Coated Magnetite Embedded on Carbon Nanotubes for Rechargeable Lithium and Sodium Batteries[J]. ACS Applied Materials & Interfaces, 2014, 6(14):11749-11757.

[41] Oh S M, Myung S T, Yoon C S, et al. Advanced Na[Ni_0.25Fe_0.5Mn_0.25]O₂/C-Fe₃O₄ sodium-ion batteries using EMS electrolyte for energy storage[J]. Nano Letters, 2014, 14(3):1620-1626.

[42] Ge Y, Jiang H, Fu K, et al. Copper-doped Li₄Ti₅O₁₂/carbon nanofiber composites as anode for high-performance sodium-ion batteries[J]. Journal of Power Sources, 2014, 272(272):860-865.

[43] Jun L, Kepeng S, Changbao Z, et al. Ge/C nanowires as high-capacity and long-life anode materials for Li-ion batteries[J]. Acs Nano, 2014, 8(7):7051-7059.

[44] Turner N H, Single A M. Determination of peak positions and areas from wide-scan XPS spectra[J]. Surface & Interface Analysis, 1990, 15(3):215-222.

[45] Brox B, Olefjord I. ESCA Studies of MoO₂ and MoO₃[J]. Surface\s&\sinterface Analysis, 1988, 13(1):3-6.

[46] Cornaglia L M, Lombardo E A. XPS studies of the surface oxidation states on vanadium-phosphorus-oxygen (VPO) equilibrated catalysts[J]. Applied Catalysis A General, 1995, 26(45):125-138.

[47] Moser T P, Schrader G L. Stability of model V-P-O catalysts for maleic anhydride synthesis[J]. Journal of Catalysis, 1987, 104(1):99-108.

[48] Qinyou A, Fan L, Qiuqi L, et al. Amorphous Vanadium Oxide Matrixes Supporting Hierarchical Porous Fe3O4/Graphene Nanowires as a High-Rate Lithium Storage Anode[J]. Nano Letters, 2014, 14(11):6250-6256.

[49] Jiang J, Tan G, Peng S, et al. Electrochemical performance of carbon-coated Li₃V₂(PO₄)₃ as a cathode material for asymmetric hybrid capacitors[J]. Electrochimica Acta, 2013, 107(3):59-65.

[50] Jinzhi, Sheng, Qiulong, et al. Metastable amorphous chromium-vanadium oxide nanoparticles with superior performance as a new lithium battery cathode[J]. Nano Research, 2014, 7(11):1604-1612.

[51] Shanmugam M, Alsalme A, Alghamdi A, et al. Enhanced Photocatalytic Performance of the Graphene-V₂O₅ Nanocomposite in the Degradation of Methylene Blue Dye under Direct Sunlight.[J]. ACS Applied Materials & Interfaces, 2015, 868(27):53-59.

[52] Yifu Z, Xinghai L, Dongzhi C, et al. Fabrication of V₃O₇·H₂O@C core-shell nanostructured composites and the effect of V₃O₇·H₂O and V₃O₇·H₂O@C on decomposition of ammonium perchlorate[J]. Solid State Ionics, 2011, 509(5):L69–L73.

[53] Wang D, Wei Q, Sheng J, et al. Flexible additive free H₂V₃O₈ nanowire membrane as cathode for sodium ion batteries[J]. Physical Chemistry Chemical Physics, 2016, 18(17):12074-12079.

[54] Wang H, Gao X, Feng J, et al. Nanostructured V₂O₅ arrays on metal substrate as binder free cathode materials for sodium-ion batteries[J]. Electrochimica Acta, 2015, 182:769-774.

[55]Wei Q, Liu J, Feng W, et al. Hydrated vanadium pentoxide with superior sodium storage capacity[J]. Journal of Materials Chemistry A, 2015, 3(15):8070-8075.