Sn-Co-M-C(M = Zn, Fe)负极材料的制备及性能研究

doi:10.61558/2993-074X.2926

电化学（中英文） ›› 2012, Vol. 18 ›› Issue (4): 328-331. doi: 10.61558/2993-074X.2926

• 化学电源近期研究专辑（武汉大学杨汉西教授主编） • 上一篇下一篇

Sn-Co-M-C(M = Zn, Fe)负极材料的制备及性能研究

方国清, 刘伟伟, 贺诗词, 张茜, 郑军伟, 李德成*

苏州大学化学电源研究所，江苏苏州 215006

收稿日期:2011-11-24 修回日期:2012-02-16 出版日期:2012-08-28 发布日期:2012-02-21
通讯作者: 李德成 E-mail:lidecheng@suda.edu.cn

Preparation and Performance of Sn-Co-M-C（M = Zn, Fe）Composites as an Anode Material

FANG Guo-Qing, LIU Wei-Wei, HE Shi-Ci, ZHANG Qian, ZHENG Jun-Wei, LI De-Cheng*

Institute of Chemical Power Sources, Soochow University, Suzhou 215006, Jiangsu, China

Received:2011-11-24 Revised:2012-02-16 Published:2012-08-28 Online:2012-02-21
Contact: LI De-Cheng E-mail:lidecheng@suda.edu.cn

摘要/Abstract

摘要： 以金属氧化物和蔗糖为原料，经混合球磨，高温碳热还原制备Sn-Co-M-C(M = Zn, Fe)复合负极材料. 采用XRD、SEM测试样品结构、观察样品形貌. 电化学性能测试表明，Sn-Co-Zn-C电极其首次嵌锂比容量571 mAh.g^-1，45次循环后其比容量369 mAh.g^-1，其比容量、循环寿命好.

关键词: 碳热还原法, 锂离子电池, 负极材料, Sn基合金

Abstract: The anode materials of Sn-Co-M-C (M = Zn, Fe) composites were prepared by carbothermal reduction method from metal oxides and sucrose in N₂ atmosphere. Their structural and electrochemical properties were studied by XRD, SEM and charge-discharge test. Among them, the Sn-Co-Zn-C composite showed higher specific capacity and good cycle performance. The initial specific discharge capacity of 571 mAh.g^-1 could be obtained, while 369 mAh.g^-1 was still kept after 45 cycles.

Key words: carbothermal reduction method, lithium-ion battery, cathode material, Sn-based alloy

中图分类号:

TM 912.9

方国清, 刘伟伟, 贺诗词, 张茜, 郑军伟, 李德成. Sn-Co-M-C(M = Zn, Fe)负极材料的制备及性能研究[J]. 电化学（中英文）, 2012, 18(4): 328-331.

FANG Guo-Qing, LIU Wei-Wei, HE Shi-Ci, ZHANG Qian, ZHENG Jun-Wei, LI De-Cheng. Preparation and Performance of Sn-Co-M-C（M = Zn, Fe）Composites as an Anode Material[J]. Journal of Electrochemistry, 2012, 18(4): 328-331.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.61558/2993-074X.2926

https://electrochem.xmu.edu.cn/CN/Y2012/V18/I4/328

参考文献

[1] Winter M, Besenhard J. Electrochemical lithiation of tin and tin-based intermetallics and composites [J]. Electrochimica Acta, 1999, 45 (1/2): 31-50.
[2] Benedek R, Thackeray M. Lithium reactions with intermetallic-compound electrodes [J]. Journal of Power Sources, 2002, 110(2): 406-411.
[3] Tamura N, Fujimoto M, Kamino M, et al. Mechanical stability of Sn-Co alloy anodes for lithium secondary batteries [J]. Electrochimica Acta, 2004, 49(12): 1949-1956.
[4] Xia Y Y, Sakai T, Takuya F, et al. Flake Cu-Sn alloys as negative electrode materials for rechargeable lithium batteries [J]. Journal of The Electrochemical Society, 2001, 148(5): A471-A 481.
[5] Mao O, Dahn J R. Mechanically alloyed Sn-Fe(-C) powders as anode materials for Li-ion batteries-II. The SnFe system [J]. Journal of The Electrochemical Society, 1999, 146(2): 414-422.
[6] http://www.sony.net/SonyInfo/News/Press/200502/05-006E/, last accessed: February 7, 2011.
[7] Chen Z X, Qian J F, Cao Y L, et al. Preparation and electrochemical performance of Sn-Co-C composite as anode material for Li-ion batteries [J]. Journal of Power Sources, 2009, 189(1): 730-732.
[8] Ferguson P, Todd A, Dahn J. Comparison of mechanically alloyed and sputtered tin-cobalt-carbon as an anode material for lithium-ion batteries [J]. Electrochemistry Communications, 2008, 1(10): 25-31.
[9] Huang T, Yao Y, Wei Z, et al. Sn-Co-artificial graphite composite as anode material for rechargeable lithium batteries [J]. Electrochimica Acta, 2010, 1(56): 476-482.
[10] Hassoun J , Mulas G, Panero S, et al. Ternary Sn-Co-C Li-ion battery electrode material prepared by high energy ball milling [J]. Electrochemistry Communications, 2007, 8(9): 2075-2081.
[11] Cui W J, Wang F, Xia Y Y, et al. Nanostructural CoSnC anode prepared by CoSnO3 with improved cyclability for high-performance Li-ion batteries [J]. Electrochimica Acta, 2011, 13(56): 4812-4818.
[12] Todd A, Ferguson P, Dahn J, et al. Tin-based materials as negative electrodes for Li-ion batteries: Combinatorial approaches and mechanical methods [J]. International Journal of Energy Research, 2010, 6(34): 535-555.
[13] He J C, Zhao H L, Wang M W, et al. Preparation and characterization of Co-Sn-C anodes for Li-ion batteries [J]. Materials Science and Engineering: B, 2010, 171(1/3): 35-39.
[14] Chang Y Q (常玉清), Huang L (黄令), Sun S G (孙世刚). Electrodeposition and electrochemical properties of ternary Sn-Co-Zn alloy electrodes as anodes for lithium-ion batteries [J]. Acta Physico-Chimica Sinica (物理化学学报), 2010, 26(3): 561-566.

[1]	左东旭, 李培超. 基于电化学-热-力耦合模型的快速充电下锂离子电池的老化特性分析[J]. 电化学（中英文）, 2024, 30(9): 2402061-.
[2]	陈露露, 李浩冉, 刘维祎, 王伟. 锂离子电池正极材料原位漫反射光谱电化学研究[J]. 电化学（中英文）, 2024, 30(6): 2314006-.
[3]	范佳琪, 宋焕巧, 安佳莹, 阿依达娜·阿曼太, 陈默. 碳限域Li₃VO₄纳米材料的制备及其储锂性能[J]. 电化学（中英文）, 2023, 29(11): 211203-.
[4]	殷秀平, 赵玉峰, 张久俊. 钠离子电池硬碳基负极材料的研究进展[J]. 电化学（中英文）, 2023, 29(10): 2204301-.
[5]	赵刚, 龚正良, 李益孝, 杨勇. 氧化钨和磷钨酸对LiNi_0.96Co_0.02Mn_0.02O₂材料的表面包覆改性研究[J]. 电化学（中英文）, 2023, 29(10): 2204281-.
[6]	陈思, 郑淞生, 郑雷铭, 张叶涵, 王兆林. 水热法制备锂电池Si@C负极材料的工艺优化研究[J]. 电化学（中英文）, 2022, 28(8): 2112221-.
[7]	王京玥, 王睿, 王诗琦, 王立帆, 詹纯. 一步固相法合成锂离子电池高镍层状正极材料[J]. 电化学（中英文）, 2022, 28(8): 2112131-.
[8]	谯渭川, 李芳儒, 肖瑾林, 屈丽娟, 赵晓, 张梦, 庞春雷, 李子坤, 任建国, 贺雪琴. 硅氧材料的膨胀性能研究和改善[J]. 电化学（中英文）, 2022, 28(5): 2108121-.
[9]	王加义, 郭胜楠, 王新, 谷林, 苏东. 锂离子电池高镍层状氧化物正极结构失效机制[J]. 电化学（中英文）, 2022, 28(2): 2108431-.
[10]	郭瑞琪, 吴锋, 王欣然, 白莹, 吴川. 多电子反应材料推动高能量密度电池发展：材料与体系创新[J]. 电化学（中英文）, 2022, 28(12): 2219011-.
[11]	朱振威, 邱景义, 王莉, 曹高萍, 何向明, 王京, 张浩. 人工智能在锂离子电池研发中的应用[J]. 电化学（中英文）, 2022, 28(12): 2219003-.
[12]	侯廷政, 陈翔, 蒋璐, 唐城. 当前和下一代锂离子电池电解液的原子尺度微观认识和研究进展[J]. 电化学（中英文）, 2022, 28(11): 2219007-.
[13]	李丹丹, 纪翔宇, 陈明, 杨燕茹, 王晓东, 冯光. 低聚离子液体的体相与界面及其电化学储能应用[J]. 电化学（中英文）, 2022, 28(11): 2219002-.
[14]	骆晨旭, 师晨光, 余志远, 黄令, 孙世刚. 富锂锰基层状正极材料的合成及其首周过充下的结构演化[J]. 电化学（中英文）, 2022, 28(1): 2006131-.
[15]	李姝谨, 曹志康, 王文凯, 张晓菡, 向兴德. 硫酸盐功能电解液增强水系钠离子电池NaTi₂(PO₄)₃/C负极材料电化学性能的研究[J]. 电化学（中英文）, 2021, 27(6): 605-613.

Sn-Co-M-C(M = Zn, Fe)负极材料的制备及性能研究

Preparation and Performance of Sn-Co-M-C（M = Zn, Fe）Composites as an Anode Material

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics