一种降低质子交换膜燃料电池不锈钢集流板与石墨单极板接触电阻的方法

电化学（中英文） ›› 2007, Vol. 13 ›› Issue (4): 392-397.

一种降低质子交换膜燃料电池不锈钢集流板与石墨单极板接触电阻的方法

孙昊;韩明;刘孟恺;贾俊波;湛耀添;

西南交通大学电气工程学院,西南交通大学电气工程学院,新加坡淡马锡理工学院燃料电池应用中心,新加坡淡马锡理工学院燃料电池应用中心,新加坡淡马锡理工学院燃料电池应用中心四川成都610031,四川成都610031,529757新加坡,529757新加坡,529757新加坡

收稿日期:2007-11-28 修回日期:2007-11-28 出版日期:2007-11-28 发布日期:2007-11-28

A New Method to Reduce the Contact Resistance Between Metal Current Collector and Graphite Plate for PEMFC

SUN Hao1,HAN Ming1,LIU Meng-kai2,JIA Jun-bo2,ZHAN Yao-tian2

(1.School of Electrical Enginerring,Southwest Jiao Tong University,Chengdu 610031,China,2.Fuel Cell Application Center,Temasek Engineering School,529757 Singapore

Received:2007-11-28 Revised:2007-11-28 Published:2007-11-28 Online:2007-11-28

摘要/Abstract

摘要： 建立一种降低质子交换膜燃料电池金属集流板与石墨单极板接触电阻的新方法.电学方法(电压降法)测试-数学模型分析表明,在不锈钢集流板和石墨单极板间嵌入金属拉伸网-碳胶聚合物复合体可消除金属集流板与石墨单极板间的接触电阻,从而能够有效降低燃料电池的内阻,提高燃料电池的性能.

关键词: 质子交换膜燃料电池, 不锈钢集流板, 石墨单极板, 金属拉伸网-碳胶聚合物导电复合体

Abstract: A new method to reduce the contact resistance between metal current collector and graphite plate for PEMFC has been proposed.It was found that the contact resistance between the stainless steel current collector and graphite plate after embedding a metal net-carbon polymer composition is effective by to eliminate,Fuel cell testing has presented that this new method can effectively reduce the internal resistance of PEMFC,and improve the performance of the PEM fuel cell.

Key words: PEMFC, stainless steel current collector, graphite plate, metal net-carbon polymer conductor

中图分类号:

TM911.4

孙昊, 韩明, 刘孟恺, 贾俊波, 湛耀添, . 一种降低质子交换膜燃料电池不锈钢集流板与石墨单极板接触电阻的方法[J]. 电化学（中英文）, 2007, 13(4): 392-397.

SUN Hao, HAN Ming, LIU Meng-kai, JIA Jun-bo, ZHAN Yao-tian. A New Method to Reduce the Contact Resistance Between Metal Current Collector and Graphite Plate for PEMFC[J]. Journal of Electrochemistry, 2007, 13(4): 392-397.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/

https://electrochem.xmu.edu.cn/CN/Y2007/V13/I4/392

参考文献

[1]Yi Bao-lian(衣宝廉).Fuel cell-principle,technologyand application[M].Beijng:Chemical Industry Press,2003:160-161. [2]Yi Bao-lian(衣宝廉).The present and furture of fuelcell[J].Chinese Journal of Power Sources,1998,22(5):216-221. [3]Ren Xue-you(任学佑).The development and furture ofPEM fuel cell[J].Battery,2003,33(6):395-397. [4]Yu Jing-rong(于景荣),Xing Dan-min(邢丹敏),LiuFu-qiang(刘富强),et al.The development of PEMfuel cell[J].Electrochemistry(in China),2001,7(4):385-395. [5]James Larminie,Andrew Dicks.Fuel cell systems ex-plained(Second edition)[M].Chichester:John Wiley&Sons Ltd,2003.67-75. [6]Litster S,Mclean G.PEM fuel cell electrodes[J].Journal of Power Sources,2004,130:61-76. [7]Blunk Richard H,Abd Elhanud Mahnoud H,Lisi Dan-iel John.Low contact resistance PEM full cell:US Pa-tent 6,811,918 B2[P].2004. [8]Wang Wen-zeng(王文增),Wang Yu-xin(王宇新).The measurement of the contact resistance betweengraphite plate and carbon paper[J].Chinese Journal ofPower Sources,2005,29(9):599-601. [9]Joyce S Cooper.Design analysis of PEMFC bipolarplates considering stack manufacturing and environmentimpact[J].Journal of Power Sources,2004,129:152-169. [10]Han M,Chan S H,Jiang S P.Devlopment of carbon-filled gas diffusion layer for polymer electrolyte fuelcell[J].Journal of Power Sources,2006,159:1005-1014. [11]Oliver J Murphy,Dunca G Hitchers,David J Manko.High power density proton-exchange membrane fuelcells[J].Journal of Power Sources,1994,47:353-368. [12]Antoini E,Giorgi L,Pozio A,et al.Influence of na-fion loading in the catalyst layer of gas-diffusion elec-trodes for PEMFC[J].Journal of Power Sources,1999,77:136-142. [13]Srinivasan S,Ticianelli E A,Derouin C R,et al.Ad-vances in solid polymer electrolyte fuel cell technologywith platinum loading electrodes[J].Journal of PowerSources,1988,22:359-375.

[1]	陈浩杰, 唐美华, 陈胜利. 质子交换膜燃料电池阴极催化层疏水性优化[J]. 电化学（中英文）, 2023, 29(9): 2207061-.
[2]	黄龙, 徐海超, 荆碧, 李秋霞, 易伟, 孙世刚. 质子交换膜燃料电池铂基催化剂研究进展[J]. 电化学（中英文）, 2022, 28(1): 2108061-.
[3]	王睿卿, 隋升. PEMFC阴极催化层结构分析[J]. 电化学（中英文）, 2021, 27(6): 595-604.
[4]	魏荣强, 李世安, 刘艺辉, 杨治, 沈秋婉, 杨国刚. 流道与肋宽比对气体扩散层性能影响的数值研究[J]. 电化学（中英文）, 2021, 27(5): 579-585.
[5]	张焰峰, 肖菲, 陈广宇, 邵敏华. 基于非贵金属氧还原催化剂的质子交换膜燃料电池性能[J]. 电化学（中英文）, 2020, 26(4): 563-572.
[6]	杨智, 沈亚云, 周娥, 魏成玲, 秦好丽, 田娟. 前驱体中N含量对FeN/C催化剂氧还原活性的影响研究[J]. 电化学（中英文）, 2020, 26(1): 130-135.
[7]	刘勇，丁涵，司德春，彭杰，张剑波. 静电纺丝制备质子交换膜燃料电池催化剂层综述[J]. 电化学（中英文）, 2018, 24(6): 639-654.
[8]	郭建伟，王建龙. 电化学阻抗谱在质子交换膜燃料电池动态的先导应用[J]. 电化学（中英文）, 2018, 24(6): 687-696.
[9]	何大平，木士春. 质子交换膜燃料电池铂电催化剂稳定策略[J]. 电化学（中英文）, 2018, 24(6): 655-663.
[10]	池滨, 叶跃坤, 江世杰, 廖世军. 低温质子交换膜燃料电池自增湿膜电极研究进展[J]. 电化学（中英文）, 2018, 24(6): 628-638.
[11]	高燕燕，侯明，姜永燚，梁栋，艾军，郑利民. 质子交换膜燃料电池催化层化学稳定性研究[J]. 电化学（中英文）, 2018, 24(3): 227-234.
[12]	肖燕，常英杰，张伟，贾秋红. 启动工况下质子交换膜燃料电池动态性能仿真分析[J]. 电化学（中英文）, 2018, 24(2): 166-173.
[13]	汤永安, 代琳, 邹受忠. 铂合金纳米立方块催化剂的氧还原反应活性比较[J]. 电化学（中英文）, 2017, 23(2): 199-206.
[14]	蒋尚峰，衣宝廉. 有序化膜电极研究进展[J]. 电化学（中英文）, 2016, 22(3): 213-218.
[15]	赵灿云，黄林，尤勇，姚颖方，苏小钢，万红，刘建国，吴聪萍. 三聚氰胺甲醛树脂废弃物制备氧还原电催化剂研究[J]. 电化学（中英文）, 2016, 22(2): 176-184.