欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 2017, Vol. 23 ›› Issue (4): 480-488.  doi: 10.13208/j.electrochem.160707

• 研究论文 • 上一篇    下一篇

温度对PbO2电沉积形核生长过程的影响研究

王磊, 薛娟琴*, 于丽花, 唐长斌, 毕强   

  1. 西安建筑科技大学冶金工程学院,陕西 西安 710055
  • 收稿日期:2016-07-07 修回日期:2016-09-09 出版日期:2017-08-25 发布日期:2016-12-02
  • 通讯作者: 薛娟琴 E-mail:huagong1985@163.com
  • 基金资助:
    国家自然科学基金(51278407,51478379,51408468)资助

Effects of Temperature on the Nucleation and Growth Mechanism of PbO2 Electrodeposition

WANG Lei, XUE Juan-qin*, YU Li-hua , TANG Chang-bin, BI Qiang   

  1. School of metallurgical engineering, Xi'an University of Architecture And Technology,xi’an 710055,shanxi,china
  • Received:2016-07-07 Revised:2016-09-09 Published:2017-08-25 Online:2016-12-02
  • Contact: XUE Juan-qin E-mail:huagong1985@163.com

摘要:

为了探讨温度对PbO2电沉积形核生长过程的影响,在25℃、35℃、45℃、55℃、65℃使用电化学工作站测试了PbO2在玻碳电极上沉积过程的循环伏安曲线、计时电位曲线及计时电流曲线,并对不同温度下电沉积的PbO2镀层进行了SEM和XRD分析. 结果表明,在不同温度下PbO2都经历了成核和核生长过程. 温度的升高没有改变PbO2电沉积三维连续成核的模式,降低了沉积过程溶液阻力,对成核和晶体生长速率均有促进作用,在晶核密度达到饱和晶核密度以前,是以促进成核速率为主,减小PbO2颗粒尺寸. 达到饱和晶核密度后,电沉积后期以促进晶体生长速率为主,不利于形成细小PbO2颗粒.高温使得析氧速率提高,能耗增大.由实验结果得出,在55℃时得到的PbO2镀层粒径最小.

关键词: PbO2, 电沉积, 形核生长, 温度

Abstract: In order to investigate the effects of temperature on the nucleation and growth of lead dioxide (PbO2), the in situ electrochemical depositions of PbO2 were carried out on the glassy carbon electrode at different temperatures, namely, 25℃,35℃, 45℃, 55℃, and 65℃.The cyclic voltammetric curves, the time-current and the time-potential curves,SEM images and XRD patterns of the PbO2 coatings deposited at different temperatures were obtained. The results showed that the PbO2 underwent nucleation and grew at different temperatures. The 3D continuous nucleation mode of PbO2 electrodeposition remained unchanged with the increase of temperature. However, the solution resistance during the deposition process was decreased. The nucleation rate and the crystal growth rate were both promoted by the increase of temperature. Before reaching the saturated nucleation density, the nucleation rate was accelerated,and the size of PbO2 particles was reduced. During the later stage of the deposition, once the saturated nucleation density was attained, the nucleation rate became prodimnant, which adversely influenced the crystal growth rate,and the coating was not conductive to the formation of small PbO2 particles. High temperature enhanced the oxygen evolution rate and increased the energy consumption. The average particle size of PbO2 obtained at 55 ℃ was the smallest one among the five temperatures tested.

Key words: PbO2, electrodeposition, nucleation and growth, temperature

中图分类号: