Pt/PMo12/PEDOT/GC电极的制备及其甲醇电氧化性能

doi:10.61558/2993-074X.2109

电化学（中英文） ›› 2013, Vol. 19 ›› Issue (2): 164-168. doi: 10.61558/2993-074X.2109

Pt/PMo₁₂/PEDOT/GC电极的制备及其甲醇电氧化性能

马静华，王睿翔，谭一良，王珊珊，张艳勤，樊友军^*

广西师范大学药用资源化学与药物分子工程教育部重点实验室，化学化工学院，广西桂林 541004

收稿日期:2012-03-28 修回日期:2012-05-10 出版日期:2013-04-28 发布日期:2012-05-20
通讯作者: 樊友军 E-mail:youjunfan@mailbox.gxnu.edu.cn
基金资助:
广西自然科学基金(No. 0991093)、广西教育厅科研项目(No. 201012MS024)、广西自然科学基金创新团队项目(No. 2010GXNSFF013001)和广西研究生教育创新计划资助

Preparation and Methanol Electrooxidation of Pt/PMo₁₂/PEDOT/GC Electrodes

MA Jing-hua, WANG Rui-xiang, TAN Yi-liang, WANG Shan-shan, ZHANG Yan-qin, FAN You-jun^*

Key Laboratory for the Chemistry and Molecular Engineering of Medicinal Resources (Ministry of Education of China), College of Chemistry and Chemical Engineering, Guangxi Normal University, Guilin 541004, Guangxi, China

Received:2012-03-28 Revised:2012-05-10 Published:2013-04-28 Online:2012-05-20
Contact: FAN You-jun E-mail:youjunfan@mailbox.gxnu.edu.cn

摘要/Abstract

摘要： 将磷钼酸（PMo₁₂）修饰到电化学聚合制得的聚3,4-乙烯二氧噻吩（PEDOT）（PEDOT/GC）膜表面（PMo₁₂/PEDOT/GC），随后电沉积Pt得Pt/PMo₁₂/PEDOT/GC电极. 研究了PMo₁₂和PEDOT对电极氧化甲醇性能的影响. 结果表明，PMo₁₂改变了电极上负载Pt的形态和结构，导致Pt纳米结构边缘产生尖锐的刺状结构. Pt/PMo₁₂/PEDOT/GC和Pt/PEDOT/GC电极有较好的甲醇氧化电催化活性，而前者尤佳. PEDOT不仅提高甲醇氧化的电流，还使甲醇的起始氧化电位负移. 进一步修饰PMo₁₂后，可明显增大甲醇氧化的电流.

关键词: 聚3,4-乙烯二氧噻吩, 磷钼酸, 燃料电池, 阳极催化剂, 甲醇电氧化

Abstract: Modification of phosphomolybdic acid (PMo₁₂) on poly(3,4-ethylenedioxythiophene) (PEDOT) film (PEDOT/GC) obtained through the electrochemical polymerization was performed using adsorption method (PMo₁₂/PEDOT/GC), followed by electrodepositing Pt on PMo₁₂/PEDOT/GC to prepare Pt/PMo₁₂/PEDOT/GC electrode. Effects of PMo₁₂ and PEDOT on the methanol oxidation performance of electrode were investigated. Results showed that PMo₁₂ obviously changed the morphology and structure of Pt loaded on the electrode, leading to the formation of sharp thorns at the edge of Pt nanostructures. Cyclic voltammetry and chronoamperometry data demonstrated that the catalytic activities of methanol electrooxidation on the Pt/PMo₁₂/PEDOT/GC and Pt/PEDOT/GC electrodes were higher than that on Pt/C, and the former exhibited the best performance. It was found that the presence of PEDOT not only increased the current, but also lowered the onset potential towards methanol oxidation. After further modification of PMo₁₂, the current of methanol oxidation was significantly increased, while the onset potential of methanol oxidation remained unaffected.

Key words: poly(3,4-ethylenedioxythiophene), phosphomolybdic acid, fuel cells, anode catalysts, methanol electrooxidation

中图分类号:

O646

马静华, 王睿翔, 谭一良, 王珊珊, 张艳勤, 樊友军. Pt/PMo₁₂/PEDOT/GC电极的制备及其甲醇电氧化性能[J]. 电化学（中英文）, 2013, 19(2): 164-168.

MA Jing-hua, WANG Rui-xiang, TAN Yi-liang, WANG Shan-shan, ZHANG Yan-qin, FAN You-jun. Preparation and Methanol Electrooxidation of Pt/PMo₁₂/PEDOT/GC Electrodes[J]. Journal of Electrochemistry, 2013, 19(2): 164-168.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.61558/2993-074X.2109

https://electrochem.xmu.edu.cn/CN/Y2013/V19/I2/164

参考文献

[1] Antolini E, Gonzalez E R. Polymer supports for low-temperature fuel cell catalysts[J]. Applied Catalyst A: General, 2009, 365(1): 1-19.
[2] Kuo C W, Sivakumar C, Wen T C. Nanoparticles of Pt/HxMoO3 electrodeposited in poly (3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) as the electrocatalyst for methanol oxidation[J]. Journal of Power Sources, 2008, 185(2): 807-814.
[3] Patra S, Munichandraiah N. Electrooxidation of methanol on Pt-modified conductive polymer PEDOT[J]. Langmuir, 2009, 25(3), 1732-1738.
[4] Maiyalagan T, Viswanathan B. Synthesis, characterization and electrocatalytic activity of Pt supported on poly(3,4-ethylenedioxythiophene)-V2O5 nanocomposites electrodes for methanol oxidation[J]. Materials Chemistry and Physics, 2010, 121(1/2): 165-171.
[5] Tintula K K, Sahu A K, et al. Directed synthesis of MC-PEDOT composite catalyst-supports for durable PEFCs[J]. Journal of Electrochemical Society, 2011, 158(6): B622-B631.
[6] Barczuk P J, Lewera A, Miecznikowski K, et al. Enhancement of catalytic activity of platinum-based nanoparticles towards electrooxidation of ethanol through interfacial modification with heteropolymolybdates[J]. Journal of Power Sources, 2010, 195(9): 2507-2513.
[7] Guo Z P, Han D M, Wexler D, et al. Polyoxometallate-stabilized platinum catalysts on multi-walled carbon nanotubes for fuel cell applications[J]. Electrochimica Acta, 2008, 53(22): 6410-6416.
[8] Wlodarczyk R, Chojak M, Miecznikowski K, et al. Electroreduction of oxygen at polyoxometallate- modified glassy carbon-supported Pt nanoparticles[J]. Journal of Power Sources, 2006, 159(2): 802-809.
[9] Han D M, Guo Z P, Zhao Z W, et al. Polyoxometallate-stabilized Pt-Ru catalysts on multiwalled carbon nanotubes: Influence of preparation conditions on the performance of direct methanol fuel cells[J]. Journal of Power Sources, 2008, 184(2): 361-369.
[10] Chojak M, Kolary-Zurowska A, Wlodarczyk R, et al. Modification of Pt nanoparticles with polyoxometallate monolayers: Competition between activation and blocking of reactive sites for the electrocatalytic oxygen reduction[J]. Electrochimica Acta, 2007, 52(18): 5574-5581.
[11] Zhou W Q, Du Y K, Ren F F, et al. High efficient electrocatalytic oxidation of methanol on Pt/polyindoles composite catalysts[J]. International Journal of Hydrogen Energy, 2010, 35(8): 3270-3279.
[12] Cheng Q, Jiang Y X, Tian N, et al. Electrocatalytic reduction of nitric oxide on Pt nanocrystals of different shape in sulfuric acid solutions[J]. Electrochimica Acta, 2010, 55(24): 8273-8279.
[13] Xu J X(许加欣), Jiang Y X(姜艳霞), Liao H G(廖洪钢), et al. Room temperature synthesis of thorn-like Pd nanoparticles and their enhanced electrocatalytic property for ethanol oxidation[J]. Acta Physico-Chimica Sinica(物理化学学报), 2010, 26(8): 2139-2143
[14] Li L(李莉), Wu G(武刚), Ye Q(叶青), et al. Electrochemical modification of Pt/C catalyst by silicomolybdic acid [J]. Acta Physico-Chimica Sinica (物理化学学报), 2006, 22(4): 419-423.

[1]	陈浩杰, 唐美华, 陈胜利. 质子交换膜燃料电池阴极催化层疏水性优化[J]. 电化学（中英文）, 2023, 29(9): 2207061-.
[2]	郑天龙, 欧明玉, 徐松, 毛信表, 王释一, 和庆钢. 一体式可再生燃料电池双功能氧催化剂的研究进展[J]. 电化学（中英文）, 2023, 29(7): 2205301-.
[3]	韦宗楠, 曹敏纳, 曹荣. 瓜环基金属纳米催化剂的电化学研究进展[J]. 电化学（中英文）, 2023, 29(1): 2215008-.
[4]	黄龙, 徐海超, 荆碧, 李秋霞, 易伟, 孙世刚. 质子交换膜燃料电池铂基催化剂研究进展[J]. 电化学（中英文）, 2022, 28(1): 2108061-.
[5]	王睿卿, 隋升. PEMFC阴极催化层结构分析[J]. 电化学（中英文）, 2021, 27(6): 595-604.
[6]	朱从懿, 李笑晖, 甘全全. 乙二醇基冷却液污染对质子交换膜燃料电池电堆的影响及恢复措施[J]. 电化学（中英文）, 2021, 27(6): 698-704.
[7]	魏荣强, 李世安, 刘艺辉, 杨治, 沈秋婉, 杨国刚. 流道与肋宽比对气体扩散层性能影响的数值研究[J]. 电化学（中英文）, 2021, 27(5): 579-585.
[8]	吴志鹏, 钟传建. 钯基氧还原和乙醇氧化反应电催化剂:关于结构和机理研究的一些近期见解[J]. 电化学（中英文）, 2021, 27(2): 144-156.
[9]	庄志华, 陈卫. 原子数精确的金属纳米团簇在电催化领域的应用研究进展[J]. 电化学（中英文）, 2021, 27(2): 125-143.
[10]	胡守训, 李亮, 杨俊豪, 李刘强, 靳志豪. 金属钯插层类水滑石的制备及其电催化乙醇的性能研究[J]. 电化学（中英文）, 2021, 27(1): 100-107.
[11]	俞成荣, 朱建国, 蒋聪盈, 谷宇晨, 周晔欣, 李卓斌, 邬荣敏, 仲政, 官万兵. 基于电-化-热耦合理论对称双阴极固体氧化物燃料电池堆的电流与温度场数值模拟[J]. 电化学（中英文）, 2020, 26(6): 789-796.
[12]	王佳, 黄秋安, 李伟恒, 王娟, 庄全超, 张久俊. 电化学阻抗谱弛豫时间分布基础[J]. 电化学（中英文）, 2020, 26(5): 607-627.
[13]	李启浩, 王英明, 马华隆, 肖丽, 王功伟, 陆君涛, 庄林. 碱性膜燃料电池阳极碳酸化模型研究[J]. 电化学（中英文）, 2020, 26(5): 731-739.
[14]	张焰峰, 肖菲, 陈广宇, 邵敏华. 基于非贵金属氧还原催化剂的质子交换膜燃料电池性能[J]. 电化学（中英文）, 2020, 26(4): 563-572.
[15]	徐明俊, 刘杰, 葛君杰, 刘长鹏, 邢巍. 长春应化所金属氮碳氧还原催化剂的研究进展[J]. 电化学（中英文）, 2020, 26(4): 464-473.

Pt/PMo₁₂/PEDOT/GC电极的制备及其甲醇电氧化性能

Preparation and Methanol Electrooxidation of Pt/PMo₁₂/PEDOT/GC Electrodes

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics