欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 2002, Vol. 8 ›› Issue (4): 452-459. 

• 研究论文 • 上一篇    下一篇

LiFeO_2包覆MCFC氧化镍阴极的制备及性能研究

王春明,李飞,胡克鳌   

  1. 上海交通大学金属基复合材料国家重点实验室,上海交通大学金属基复合材料国家重点实验室,上海交通大学金属基复合材料国家重点实验室 上海200030 ,上海200030 ,上海200030
  • 收稿日期:2002-11-28 修回日期:2002-11-28 出版日期:2002-11-28 发布日期:2002-11-28

Preparation and Performance of LiFeO_2 Coated Nickel Oxide Cathode for Molten Carbonate Fuel Cells

Wang Chun-ming *, LI Fei, HU Ke-ao   

  1. (State Key Laboratory of Metal Matrix Composites, Shanghai Jiaotong University, Shanghai, 200030, China
  • Received:2002-11-28 Revised:2002-11-28 Published:2002-11-28 Online:2002-11-28

摘要: 以硝酸锂和硝酸铁为原料 ,柠檬酸作燃料 ,采用燃烧合成法制备了铁酸锂包覆的多孔氧化镍阴极 .X_射线衍射技术 (XRD)、X_射线能量散射谱 (EDAX)和电子显微镜 (TEM和SEM )分析表明 ,在氧化镍颗粒表面的包覆层是由直径小于 10 0nm的铁酸锂微粒所构成 ,并与氧化镍颗粒紧密烧结在一起 ,有效地减少了氧化镍与熔融碳酸盐的接触面积 ,从而降低了氧化镍的溶解度 .同时 ,本文还研究了该阴极在熔融碳酸盐燃料电池中的电性能 ,并与未包覆的NiO阴极进行比较

关键词: 熔融碳酸盐燃料电池, 阴极, 铁酸锂, 包覆层, 燃烧合成

Abstract: A novel cathode for molten carbonate fuel cells was prepared by coating LiFeO 2 over the surface of porous NiO cathode by a simple combustion process. The analytical results of X-ray diffraction (XRD), energy dispersive analysis of X-ray (EDAX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the LiFeO 2 coating on the surface of NiO particles consisted of nonometer-sized LiFeO 2 grains and sintered tightly with the NiO particles. The LiFeO 2 coating dramatically reduced the contacting area of NiO with the carbonate melts, thus the solubility of NiO in the carbonate melts was decreased. Meanwhile, the performance of this novel cathode was cited and compared with the uncoated NiO cathode in molten carbonate fuel cells.

Key words: Molten carbonate fuel cell, Cathode, LiFeO 2, Coating, Combustion synthesis

中图分类号: