[1] Ibrahim H, Ilinca A, Perron J. Energy storage systems—Characteristics and comparisons[J]. Renewable and Sustainable Energy Reviews, 2008, 12(5): 1221-1250.[2] Dursun B, Alboyaci B. The contribution of wind-hydro pumped storage systems in meeting Turkey's electric energy demand[J]. Renewable and Sustainable Energy Reviews, 2010, 14(7): 1979-1988.[3] Cooper A. Collaboration in research-the ALABC: Brite-EuRam lead/acid electric-vehicle battery project[J]. Journal of Power Sources, 1996, 59(1/2): 161-170.[4] Ikeya T, Sawada N, Takagi S, et al. Charging operation with high energy efficiency for electric vehicle valve-regulated lead-acid battery system[J]. Journal of Power Sources, 2000, 91(2): 130-136.[5] Chang T G, Jochim D M. Structural changes of active materials and failure mode of a valve-regulated lead-acid battery in rapid-charge and conventional-charge cycling[J]. Journal of Power Sources, 2000, 91(2): 177-192.[6] Berndt D. Valve-regulated lead-acid batteries[J]. Journal of Power Sources, 2001, 95(1/2): 2-12.[7] Moseley P T, Nelson R F, Hollenkamp A F. The role of carbon in valve-regulated lead-acid battery technology[J]. Journal of Power Sources, 2006, 157(1): 3-10.[8] Ba?a P, Micka K, K?ivík P, et al. Investigation of the effect of mechanical pressure on the performance of negative lead accumulator electrodes during partial state of charge operation[J]. Journal of Power Sources, 2012, 207: 37-44.[9] K?ivík P, Micka K, Ba?a P, et al. Effect of additives on the performance of negative lead-acid battery electrodes during formation and partial state of charge operation[J]. Journal of Power Sources, 2012, 209: 15-19.[10] Sawai K, Funato T, Watanabe M, et al. Development of additives in negative active-material to suppress sulfation during high-rate partial-state-of-charge operation of lead-acid batteries[J]. Journal of Power Sources, 2006, 158(2): 1084-1090.[11] Zhao L, Chen B, Wang D. Effects of electrochemically active carbon and indium(III) oxide in negative plates on cycle performance of valve-regulated lead-acid batteries during high-rate partial-state-of-charge operation[J]. Journal of Power Sources, 2013, 231: 34-38.[12] Shiomi M, Funato T, Nakamura K, et al. Effects of carbon in negative plates on cycle-life performance of valve-regulated lead/acid batteries[J]. Journal of Power Sources, 1997, 64(1/2): 147-152.[13] Ohmae T, Hayashi T, Inoue N. Development of 36-V valve-regulated lead-acid battery[J]. Journal of Power Sources, 2003, 116(1/2): 105-109.[14] Moseley P T. Consequences of including carbon in the negative plates of valve-regulated lead-acid batteries exposed to high-rate partial-state-of-charge operation[J]. Journal of Power Sources, 2009, 191(1): 134-138.[15] Hollenkamp A F, Baldsing W G A, Lau S, et al. Vu ALABC Project N1.2 overcoming negative-plate capacity loss in vrla batteries cycled under partial state-of-charge duty final report[R]. July 2000-June 2002.[16] Pavlov D, Nikolov P. Capacitive carbon and electrochemical lead electrode systems at the negative plates of lead-acid batteries and elementary processes on cycling[J]. Journal of Power Sources, 2013, 242: 380-399.[17] Xiang J, Ding P, Zhang H, et al. Beneficial effects of activated carbon additives on the performance of negative lead-acid battery electrode for high-rate partial-state-of-charge operation[J]. Journal of Power Sources, 2013, 241: 150-158.[18] Spence M A, Boden D P, Wojcinski T D. Identification of the optimum specification for carbon to be included in the negative active material of a valve-regulated battery in order to avoid accumulation of lead sulfate during high-rate partial-state-of-charge operation[R]//ALABC Research Project Designation C1.1/2.1A, Progress Report 2. May 2008.[19] Pavlov D, Rogachev T, Nikolov P, et al. Mechanism of action of electrochemically active carbons on the processes that take place at the negative plates of lead-acid batteries[J]. Journal of Power Sources, 2009, 191(1): 58-75.[20] Pavlov D, Nikolov P, Rogachev T. Influence of expander components on the processes at the negative plates of lead-acid cells on high-rate partial-state-of-charge cycling. Part II. Effect of carbon additives on the processes of charge and discharge of negative plates[J]. Journal of Power Sources, 2010, 195(14): 4444-4457.[21] Kozawa A, Oho H, Sano M, et al. Beneficial effect of carbon-PVA colloid additives for lead-acid batteries[J]. Journal of Power Sources, 1999, 80(1/2): 12-16.[22] Boden D P, Loosemore D V, Spence M A, et al. Optimization studies of carbon additives to negative active material for the purpose of extending the life of VRLA batteries in high-rate partial-state-of-charge operation[J]. Journal of Power Sources, 2010, 195(14): 4470-4493.[23] Pavlov D, Nikolov P, Rogachev T. Influence of carbons on the structure of the negative active material of lead-acid batteries and on battery performance[J]. Journal of Power Sources, 2011, 196(11): 5155-5167.[24] Ba?a P, Micka K, K?ivík P, et al. Study of the influence of carbon on the negative lead-acid battery electrodes[J]. Journal of Power Sources, 2011, 196(8): 3988-3992.[25] Bullock K R. Carbon reactions and effects on valve-regulated lead-acid (VRLA) battery cycle life in high-rate, partial state-of-charge cycling[J]. Journal of Power Sources, 2010, 195(14): 4513-4519.[26] Zhang H(张浩), Cao G P(曹高萍), Yang Y S(杨裕生). Application of carbon materials in lead acid batteries[J]. Chinese Journal of Power Sources(电源技术), 2010, 34(7): 729-733.[27] Zhang H(张浩), Wu X Z(吴贤章), Xiang J Y(相佳媛), et al. Research progress of ultra lead-acid batteries[J]. Chinese battery industry(电池工业), 2012, 17(3): 171-175. |