高温驱动氧化锰刻蚀制备纳米氧化锰-多孔石墨烯及其锂空气电池性能研究

doi:10.13208/j.electrochem.180626

摘要/Abstract

摘要： 本文通过简单的电荷吸附制备了高分散的氧化石墨烯含锰化合物（Mn-GO），利用高温驱动下氧化锰的生长以及热运动同时实现了GO的还原、刻蚀和纳米氧化锰的负载，即成功构筑了纳米氧化锰-多孔石墨烯复合材料（MnO-PGNSs）. 对影响GO分散性的Mn²⁺的添加量、影响GO层数的分散液浓度以及影响MnO热运动的烧结条件进行了详细的考察. 研究发现，当Mn-GO同时满足优异的分散性、适合的片层厚度和烧结条件（＞800℃，>2h），才能在GNSs表面刻蚀成孔制备得到MnO-PGNSs. 本文进一步将MnO-PGNSs作为锂空气电池正极材料，结果表明在50 mA·g^-1的电流密度下深度放电后容量达到5100 mAh·g^-1，相比于GNSs和PGNSs，MnO-PGNSs具有更高的比容量. 锂空气电池性能的提高得益于GNSs表面的多孔结构和MnO优异的催化活性.

关键词: 氧化石墨烯, 氧化锰, 氧化锰-多孔石墨烯复合材料, 锂空气电池

Abstract: In this paper, improving the surface morphology of graphene(GNSs) as designed concept. we describe a MnO/porous-graphene(MnO-PGNSs) was synthesized by a simple site-localized Mn²⁺ on GO (Mn-GO) by charge adsorption and then driving by high-temperature calcination, growing MnO nanoparticles and etching GNSs achieved on step. And Then focus on the key factors of influenced the etch hole formation are analyzed, founded the dispersion of Mn-GO; layer number of GO and calcination temperature also affected the formation of holes. In addition, the MnO-PGNSs as lithium-air battery cathode exhibits high reversible capacity compared with GNSs and PGNs and it is able to deliver storage capacity as high as 5100 mAh·g^-1 at 50 mA·g^-1.

Key words: GO, MnO, MnO-PGNSs, lithium-air battery

中图分类号:

O646

杨娟, 郎俊伟, 张鹏, 刘宝. 高温驱动氧化锰刻蚀制备纳米氧化锰-多孔石墨烯及其锂空气电池性能研究[J]. 电化学（中英文）, 2019, 25(5): 621-630.

YANG Juan, LANG Jun-wei, ZHANG Peng, LIU Bao. Preparation of Nanostructural MnO-porous Graphene Hybrid Material by Thermally-driven Etching of MnO for Lithium-Air Batteries[J]. Journal of Electrochemistry, 2019, 25(5): 621-630.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.13208/j.electrochem.180626

https://electrochem.xmu.edu.cn/CN/Y2019/V25/I5/621

参考文献

[1] Geim A K, Novoselov K S. The rise of graphene[J]. Nature Materials, 2007, 6(3): 183-191.
[2] Geim A K. Graphene: Status and prospects[J]. Science, 2009, 324(5934): 1530-1534.
[3] Luo B, Liu S M, Zhi L J. Chemical approaches toward graphene-based nanomaterials and their applications in energy-related areas[J]. Small, 2012, 8(5): 630-646.
[4] Xu C H, Xu B H, Gu Y, et al. Graphene-based electrodes for electrochemical energy storage[J]. Energy &Environmental Science, 2013, 6(5): 1388-1414.
[5] Tang J, Liu J, Torad N L, et al. Tailored design of functional nanoporous carbon materials toward fuel cell applications[J]. Nano Today, 2014, 9(3): 305-323.
[6] Yoo E, Kim J, Hosono E, et al. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries[J]. Nano Letters, 2008, 8(8): 2277-2282.
[7] Wang G X, Shen X P, Yao J, et al. Graphene nanosheets for enhanced lithium storage in lithium ion batteries[J]. Carbon, 2009, 47(8): 2049-2053.
[8] Lian P C, Zhu X F, Liang S Z, et al. Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries[J]. Electrochimica Acta, 2010, 55(12): 3909-3914.
[9] Bhardwaj T, Antic A, Pavan B, et al. Enhanced electrochemical lithium storage by graphene nanoribbons[J]. Journal of the American Chemical Society, 2010, 132(36): 12556-12558.
[10] Zhang P, Wang R T, He M, et al. 3D hierarchical Co/CoO-graphene-carbonized melamine foam as a superior cathode toward long-life lithium oxygen batteries[J]. Advanced Functional Materials, 2016, 26(9): 1354-1364.
[11] Guo Z Y, Zhou D D, Dong X L, et al. Ordered hierarchical mesoporous/macroporous carbon: a high-performance catalyst for rechargeable Li-O₂ batteries[J]. Advanced Materials, 2013, 25(39): 5668-5672.
[12] Ye J L(叶江林), Zhu Y W(朱彦武). Porous carbon materials produced by KOH activation for supercapacitor electrodes[J]. Journal of Electrochemistry(电化学), 2017, 23(5): 548-559.
[13] Xu Y X, Lin Z Y, Zhong X, et al. Holey graphene frameworks for highly efficient capacitive energy storage[J]. Nature Communications, 2014, 5: 4554.
[14] Xiao J, Mei D H, Li X L, et al. Hierarchically porous graphene as a lithium-air battery electrode[J]. Nano Letters, 2011, 11(11): 5071-5078.
[15] Sun B, Huang S D, Chen S Q, et al. Porous graphene nanoarchitectures an efficient catalyst for low charge-overpotential, long life and high capacity lithium-oxygen batteries[J]. Nano Letters, 2014, 14(6): 3145-3152.
[16] Kim D Y, Jin X, Lee C H, et al. Improved electrochemical performance of ordered mesoporous carbon by incorporating macropores for Li-O₂ battery cathode[J]. Carbon, 2018, 133: 118-126.
[17] Lin Y, Moitoso B, Martinez-Martinez C, et al. Ultrahigh-capacity lithium-oxygen batteries enabled by dry-pressed holey graphene air cathodes[J]. Nano Letters, 2017, 17(5): 3252-3260.
[18] Lacey S D, Walsh E D, Hitz E, et al. Highly compressible, binderless and ultrathick holey graphene-based electrode architectures[J]. Nano Energy, 2017, 31: 386-392.
[19] Han J H, Guo X W, Ito Y, et al. Effect of chemical doping on cathodic performance of bicontinuous nanoporous graphene for Li-O₂ batteries[J]. Anvanced Energy Materials, 2016, 6(3): 1501870.
[20] Lin X D, Cao Y, Cai S R, et al. Ruthenium@mesoporous graphene-like carbon: a novel three-dimensional cathode catalyst for lithium-oxygen batteries[J]. Journal of Materials Chemistry A, 2016, 4(20): 7788-7794.
[21] Zhao C T, Yu C, Liu S H, et al. 3D porous N-doped graphene frameworks made of interconnected nanocages for ultrahigh-rate and long-life Li-O₂ batteries[J]. Anvanced Energy Materials, 2015, 25(44): 6913-6920.
[22] Liu B, Sun Y L, Liu L, et al. Advances in manganese-based oxides cathodic electrocatalysts for Li-air batteries[J]. Advanced Functional Materials, 2018, 28(15): 1704973.
[23] Liu T(刘通), Li N(李娜), Liu Q C(刘清朝), et al. Porous Co₃O₄ hollow nanospheres cathode catalyst for high-capacity and long-cycle Li-air batteries[J]. Journal of Electrochemistry(电化学), 2012, 134(6): 2902-2905.
[24] He M, Zhang P, Xu S, et al. Morphology engineering of Co₃O₄ nanoarrays as free-standing catalysts for lithium-oxygen batteries[J]. ACS Applied Materials & Interfaces, 2016, 8(36): 23713-23720.
[25] Sinitskii A, Tour J M. Patterning graphene through the self-assembled templates: toward periodic two-dimensional graphene nanostructures with semiconductor properties[J]. Journal of the Americal Chemical Society, 2010, 132(42): 14730-14732.
[26] Zeng Z Y, Huang X, Yin Z Y, et al. Fabrication of graphene nanomesh by using an anodic aluminum oxide membrane as a template[J]. Advanced Materials, 2012, 24(30): 4138-
4142.
[27] Jiang Z Q, Pei B, Manthiram A. RandomLy stacked holey graphene anodes for lithium ion batteries with enhanced electrochemical performance[J]. Journal of Materials Chemistry A, 2013, 1(26): 7775-7781.
[28] Yu D S, Wei L, Jiang W C, et al. Nitrogen doped holey graphene as an efficient metal-free multifunctional electrochemical catalyst for hydrazine oxidation and oxygen reduction[J]. Nanoscale, 2013, 5(8): 3457-3464.
[29] Liu J Y, Cai H B, Yu X X, et al. Fabrication of graphene nanomesh and improved chemical enhancement for raman spectroscopy[J]. Journal of Materials Chemistry C, 2012, 116(29): 15741-15746.
[30] Kotchey G P, Allen B L, Vedala H, et al. A. Star, the enzymatic oxidation of graphene oxide[J]. ACS Nano, 2011, 5(3): 2098-2108.
[31] Solís-Fernández P, Yoshida K, Ogawa Y, et al. Dense arrays of highly aligned graphene nanoribbons produced by substrate-controlled metal-assisted etching of graphene[J]. Advanced Materials, 2013, 25(45): 6562-6568.
[32] Zhang Y J, Ji L, Li W F, et al. Highly defective graphite for scalable synthesis of nitrogen doped holey graphene with high volumetric capacitance[J]. Journal of Power Sources, 2016, 334: 104-111.
[33] Xu Y X, Chen C Y, Zhao Z P, et al. Solution processable holey graphene oxide and its derived macrostructures for high-performance supercapacitors[J]. Nano Letters, 2015, 15(7): 4605-4610.
[34] Xing Z C, Tian J Q, Liu Q, et al. Holey graphene nano-sheets: large-scale rapid preparation and their application toward highly-effective water cleaning[J]. Nanoscale, 2014, 6(20): 11659-11663.
[35] Lin Y, Watson K A, Kim J W, et al. Bulk preparation of holey graphene via controlled catalytic oxidation[J]. Nanoscale, 2013, 5(17): 7814-7824.
[36] Zhou D, Cui Y, Xiao P W, et al. A general and scalable synthesis approach to porous graphene[J]. Nature Communications, 2014, 5:4716.
[37] Jiang Z Q, Pei B, Manthiram A. RandomLy stacked holey graphene anodes for lithium ion batteries with enhanced electrochemical performance[J]. Journal of Materials Chemistry A, 2013, 1(26): 7775-7781
[38] Ma Z Y, Cao H L, Zhou X F, et al. Hierarchical porous MnO/graphene composite aerogel as high-performance anode material for lithium ion batteries[J]. RSC Advances, 2017, 7(26): 15857-15863.
[39] Yang J, Yu S X, Yan X B, et al. Synthesis of a graphene nanosheet film with attached amorphous carbon nanoparticles by their simultaneous electrodeposition[J]. Carbon, 2010, 48(9): 2644-2673.
[40] Yang J, Yan X B, Chen J T, et al. Comparison between metal ion and polyelectrolyte functionalization of grapheme nanosheets for the electrophoretic deposition of graphene nanosheet films[J]. RSC Advances, 2012, 2(25): 9665-9670.
[41] Yang J, Yan X B, Wang Y, et al. Deposition of bio-mimicking graphene sheets with lotus leaf-like and cell-like structures on the nickel substrate[J]. Chinese Science Bulletin, 2012, 57(23): 3036-3039.
[42] Nguyen H V, Tun N M, Kryukov A Y, et al. Dependence of the “solubility” of oxidized carbon nanomaterials on the acidity of aqueous solutions[J]. Physical Chemistry of Nanoclusters and Nanomaterials, 2013, 88(9): 1394-1398.
[43] Ryu S W, Lee B, Hong S K, et al. Salting-out as a scalable, in-series purification method of graphene oxides from microsheets to quantum dots[J]. Carbon, 2013, 63: 45-53.
[44] Wu Q L, Jiang M L, Zhang X F, et al. A novel octahedral MnO/RGO composite prepared by thermal decomposition as a noble-metal free electrocatalyst for ORR[J]. Journal of Materials Science, 2017, 52(11): 6656-6669.