欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 2014, Vol. 20 ›› Issue (5): 452-458.  doi: 10.13208/j.electrochem.131175

• 电化学近期研究专辑(厦门大学 姜艳霞教授主编) • 上一篇    下一篇

微接触印刷技术转移Au纳米粒子及氧化石墨烯复合图案及其性质研究

庞文辉,肖孝建,叶梦薇,邓凯超,汤儆*   

  1. 福州大学 化学化工学院,教育部暨福建省食品安全和分析检测重点实验室,福建 福州 350108
  • 收稿日期:2014-02-08 修回日期:2014-04-08 出版日期:2014-10-28 发布日期:2014-04-13
  • 通讯作者: 汤儆 E-mail:jingtang@fzu.edu.cn
  • 基金资助:

    国家自然科学基金项目(No. 21073038,No. 21173048)资助

Fabrication of Pattern of Graphene Oxide and Au Nanoparticles by Microcontanct Printing Technique

PANG Wen-hui, XIAO Xiao-jian, YE Meng-wei, DENG Kai-chao, TANG Jing*   

  1. Key Laboratory of Analysis and Detection Technology for Food Safety, Ministry of Education, College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350108, China
  • Received:2014-02-08 Revised:2014-04-08 Published:2014-10-28 Online:2014-04-13
  • Contact: TANG Jing E-mail:jingtang@fzu.edu.cn

摘要: 通过改良的“Hummers方法”制得氧化石墨烯,利用聚二甲基硅氧烷(PDMS)弹性印章的微接触印刷技术,以Au膜和氧化石墨烯溶液为“墨水”,通过二次印章转移,分别将Au纳米粒子和氧化石墨烯(Graphene Oxide,GO)转移至修饰了(3-氨基丙基)三乙氧基硅烷(APTES)的ITO基底(APTES/ITO)表面. 利用场发射扫描电子显微镜(FE-SEM)、原子力显微镜(AFM)等表征图案,结果表明转移的AuNPs和GO组成的复合图案均匀,致密性较好. 利用表面电势显微镜(Surface Potential Microscope,SEPM,KFM)测定了各部分的表面电势,以APTES/ITO基底表面为表面电势零点,各部分表面电势大小为:APTES/ITO > GO > Au(0,-11.6,-44.2 mV).

关键词: 氧化石墨烯, Au纳米粒子, 微接触印刷技术

Abstract: Graphene oxide (GO) was prepared by modified Hummers method. Using the GO solution as "ink", Au nanoparticles (AuNPs) and GO were transferred to the surface of ITO substrate modified with (3-aminopropyl) triethoxysilane (APTES/ITO) in a sequence. The transferred AuNPs and GO could form a uniform and dense composite pattern which was characterized by FE-SEM and AFM. Moreover, using the APTES/ITO substrate surface potential as zero, the sequences of the surface potential were APTES>GO>Au.

Key words: graphene oxide, Au nanoparticles, microcontact printing technique

中图分类号: