模拟混凝土孔溶液中钢筋电化学噪音测量及小波分析

doi:10.61558/2993-074X.3335

电化学（中英文） ›› 2010, Vol. 16 ›› Issue (2): 137-144. doi: 10.61558/2993-074X.3335

模拟混凝土孔溶液中钢筋电化学噪音测量及小波分析

胡融刚;叶陈清;董士刚;林昌健;

厦门大学化学化工学院,固体表面物理化学国家重点实验室;

收稿日期:2010-05-28 修回日期:2010-05-28 出版日期:2010-05-28 发布日期:2010-05-28

Measurement and Wavelet Analysis of the Electrochemical Noise of Rebar Steel in Simulated Concrete Pore Solution

HU Rong-gang,YE Chen-qing,DONG Shi-gang,LIN Chang-jian

( College of Chemistry and Chemical Engineering,State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University,Xiamen 361005,Fujian,China

Received:2010-05-28 Revised:2010-05-28 Published:2010-05-28 Online:2010-05-28

摘要/Abstract

摘要： 电化学噪音(Electrochemical Noise,ECN)测量可用于在无电信号扰动条件下检测腐蚀体系的暂态行为,获得有关腐蚀类型和腐蚀速率的信息.小波分析不需要对ECN作稳态假设,并同时具有时间分辨和频率分辨的特点,在ECN信号处理中表现出一定的优势.本工作考察了氯离子对钢筋在模拟混凝土孔溶液中电化学噪音的影响,并采用离散小波变换(DWT)及能量分布图(EDP)分析ECN信号的时间～频率特征.结果表明,在含NaCl0.0001mol/L的饱和Ca(OH)2溶液中,时间常数为16～32s的暂态占优势;在Cl-浓度更高的溶液中,去钝化趋势为主导事件,表明钢筋在SPS溶液中活化/钝化的临界Cl-浓度介于10-4～10-3mol/L.

关键词: 电化学噪音,小波分析,钢筋, 腐蚀

Abstract: Electrochemical noise ( ECN) measurement can provide information about both corrosion rate and corrosion type while inflicting no perturbation on the studied system. The ECN data of steel rebar in SPS with different amount of Cl-were collected and treated by discrete wavelet transformation to evaluate the contribution from transients in different frequency in the overall signals. Energy distribution plot( EDP) indicated in SPS with 0. 0001 mol/L NaCl,the transients with time constant between 16 ～ 32 s were found to be predominant over other processes; while in SPS with higher Cl-concentration,the trend toward active corrosion became the main process. It is concluded that the threshold Cl-concentration determining corrosion/passivation of steel rebar in SPS is between 10-4 ～ 10-3 mol/L.

Key words: electrochemical noise, wavelet analysis, rebar stee, corrosion

中图分类号:

TG174

胡融刚, 叶陈清, 董士刚, 林昌健, . 模拟混凝土孔溶液中钢筋电化学噪音测量及小波分析[J]. 电化学（中英文）, 2010, 16(2): 137-144.

HU Rong-gang, YE Chen-qing, DONG Shi-gang, LIN Chang-jian . Measurement and Wavelet Analysis of the Electrochemical Noise of Rebar Steel in Simulated Concrete Pore Solution[J]. Journal of Electrochemistry, 2010, 16(2): 137-144.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/10.61558/2993-074X.3335

https://electrochem.xmu.edu.cn/CN/Y2010/V16/I2/137

参考文献

[1]Blanc G,Gabrielli C,Ksourti M,et al.Experimental study of the relationships between the electrochemical noise and the structures of the electrodepositions of metals[J].Electrochimica Acta,1978,23(4):337-340. [2]Iverson W P.Transient voltage changes produced in cor-roding metals and alloys[J].Journal of the Electro-chemical Society,1968,115:617. [3]Aballe A,Bethencourt M,Botana F J,et al.Wavelet transform-based analysis for electrochemical noise[J].Electrochemistry Communications,1999,1(7):266-270. [4]Mansfield F,Little B A.Technique review of electro-chemical technique applied to microbiologically influ-enced corrosion[J].Corrosion Science,1991,32:247-272. [5]Xiao H,Han L T,Lee C C,et al.Collection of electro-chemical impedance and noise data for polymer-coated steel from remote test sites[J].Corrosion,1997,53(5):412-422. [6]Gusmano G,Montesperelli G,Pacetti S,et al.Electro-chemical noise resistance as a tool for corrosion rate prediction[J].Corrosion,1997,53(11):860-868. [7]Wharton J A,Wood R J K,Mellor B G.Wavelet analysis of electrochemical noise measurements during corrosion of austenitic and superduplex stainless steels in chloride media[J].Corrosion Science,2003,45:97-122. [8]Zhou X Y,Lvov S N,Wei X J,et al.Quantitative evalua-tion of general corrosion of type304stainless steel in subcritical and supercritical aqueous solutions via elec-trochemical noise analysis[J].Corrosion Science,2002,44:841-860. [9]Cheng Y F,Wilmott M,Luo J L.Analysis of the role of electrode capacitance on the initiation of pits for A516 carbon steel by electrochemical noise measurements[J].Corrosion Science,1999,41(7):1245-1256. [10]Uruchurtu J,Dawson J L.Noise analysis of pure alumi-num under different pitting corrosions[J].Corrosion,1987,43(1):19-25. [11]Uruchurtu J.Electrochemical investigations of the acti-vation mechanism of aluminum[J].Corrosion,1991,47(6):472-479. [12]Greisiger H,Schauer T.On the interpretation of the el-ectrochemical noise data for coatings[J].Progress in Organic Coatings,2000,39(1):31-36. [13]Mansfeld F,Han L T,Lee C C,et al.Evaluation of cor-rosion protection by polymer coatings using electro-chemical impedance spectroscopy and noise analysis[J].Electrochimica Acta,1998,43,2933-2945. [14]Mills D J,Mabbutt S.Investigation of defects in organic anti-corrosive coatings using electrochemical noise measurement[J].Progress in Organic Coatings,2000,39(1):41-48. [15]Schauer T,Greisiger H,Dulog L.Details on MEM anal-ysis of electrochemical noise data and correlation with impedance measurements for organic coatings on metals[J].Electrochimica Acta,1998,43(16/17):2423-2433. [16]Gao Z M(高志明),Song X P(宋小平),Pang X S(庞兴收),et al.The application of wavelet in transient measurement of corrosion electrochemistry[J].Journal of Chinese Society for Corrosion and Protection(中国腐蚀与防护学报),2001,21(4):245-249. [17]Dong Z H(董泽华),Guo X P(郭兴蓬),Zheng J S(郑家燊）.Review on electrochemical noise analysis methods[J].Materials Protection(材料保护),2001,14(7):20-24. [18]Searson P C,Dawson J L.Analysis of electrochemical noise generated by corroding electrodes under open-cir-cuit conditions[J].Journal of the Electrochemical So-ciety,1988,135(8):1908-1915. [19]Aballe A,Bethencourt M,Botana F J,et al.Using wa-velets transform in the analysis of electrochemical noise data[J].Electrochimica Acta,1999,44:4805-4816. [20]Nachstedt K,Heusler K E.Electrochemical noise at pa-ssive iron[J].Electrochimica Acta1988,33(3):311-321. [21]Mc Cafferty E J.A competitive model for the inhibition of crevice corrosion and pitting[J].Journal of the Electrochemical Society,1990137(12):3731-3737.

模拟混凝土孔溶液中钢筋电化学噪音测量及小波分析

Measurement and Wavelet Analysis of the Electrochemical Noise of Rebar Steel in Simulated Concrete Pore Solution

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

[1]	秦凯旋, 常鹏飞, 黄钰林, 李明, 杭弢. 钴互连化学机械抛光浆料中的界面腐蚀行为研究[J]. 电化学（中英文）, 2022, 28(6): 2104471-.
[2]	杨森, 王文昌, 张然, 秦水平, 吴敏娴, 光崎尚利, 陈智栋. 醇硫基丙烷磺酸钠对电解高性能锂电铜箔的影响[J]. 电化学（中英文）, 2022, 28(6): 2104501-.
[3]	张涛, 刘一蒲, 叶齐通, 范红金. 工业级碱性海水电解:近期进展和展望[J]. 电化学（中英文）, 2022, 28(10): 2214006-.
[4]	况先银, 金少强, 曹艳辉, 张艳梅, 董士刚, 朱龙晖, 林理文, 林昌健. 铝合金表面改性对有机涂层附着力的影响及腐蚀防护性能研究[J]. 电化学（中英文）, 2021, 27(6): 624-636.
[5]	邹振文, 郑大江, 王子明, 宋光铃. 新型单丝电极交流探头在3.5wt.% NaCl中的电化学响应规律研究[J]. 电化学（中英文）, 2020, 26(3): 317-327.
[6]	张翅, 李成飞, 李高仁. 负载于刻蚀镍泡沫上钯纳米粒子作为乙醇氧化高性能电催化剂[J]. 电化学（中英文）, 2019, 25(5): 571-578.
[7]	赫威，燕汝，王瑛琦，高翔，马厚义. 在冷轧钢板表面制备二乙烯三胺五甲叉膦酸-锌化学转化膜及其腐蚀防护性能的研究[J]. 电化学（中英文）, 2018, 24(2): 111-121.
[8]	H. A. Fetouh, B.A. Abd-El-Nabey, Y.M. Goher, M. S. Karam. 银纳米颗粒对铝金属在酸性介质中的耐蚀性能研究[J]. 电化学（中英文）, 2018, 24(1): 89-100.
[9]	陈晓航，陈寞静，闵宇霖，徐群杰. 水热法制备铝合金超疏水表面及电化学性能研究[J]. 电化学（中英文）, 2018, 24(1): 28-35.
[10]	徐天宇，王世颖，王文昌，陈智栋. 镍离子对中磷镍基体氯化胆碱无氰浸金表面的改善[J]. 电化学（中英文）, 2018, 24(1): 36-39.
[11]	王静静，董士刚，张小娟，吕虹玮，伍运昌，杜荣归，林昌健. pH/Cl^-复合探针技术对钢筋混凝土电化学除氯的原位检测[J]. 电化学（中英文）, 2014, 20(2): 95-100.
[12]	叶陈清，胡融刚，侯瑞青，王小平，杜荣归，林昌健*. 敏化处理304不锈钢局部腐蚀行为的扫描微电极法研究[J]. 电化学（中英文）, 2013, 19(6): 507-511.
[13]	曹发和, 夏妍, 刘文娟, 常林荣, 张鉴清. SECM基本原理及其在金属腐蚀中的应用[J]. 电化学（中英文）, 2013, 19(5): 393-401.
[14]	李凌杰, 贺毓玲, 雷惊雷, 张胜涛. 椭圆偏振光谱技术的腐蚀研究应用[J]. 电化学（中英文）, 2013, 19(5): 402-408.
[15]	孙海静, 刘莉, 李瑛. 深海静水压力环境下低合金高强度钢腐蚀行为研究[J]. 电化学（中英文）, 2013, 19(5): 418-424.