欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 2005, Vol. 11 ›› Issue (1): 67-71. 

• 研究论文 • 上一篇    下一篇

钛基表面纳米羟基磷灰石涂层的电泳沉积

陈菲,林昌健,王周成   

  1. 厦门大学表面物理化学国家重点实验室,厦门大学表面物理化学国家重点实验室,厦门大学材料科学与工程系 厦门大学化学系,福建厦门361005 ,厦门大学化学系,福建厦门361005 ,福建厦门361005
  • 收稿日期:2005-02-28 修回日期:2005-02-28 出版日期:2005-02-28 发布日期:2005-02-28

The Electrophoretic Deposition of Nano Hydroxyapatite Coating on Titanium Surface

CHEN Fei~1,LIN Chang-jian~   

  1. (*1),WANG Zhou-cheng~2(1.State Key Lab for Physical Chemistry of Solid Surfaces,Department of Chemistry, Xiamen University, Xiamen 361005, China,2.Department of Materials Science and Engineering, Xiamen University, Xiamen~()361005, China
  • Received:2005-02-28 Revised:2005-02-28 Published:2005-02-28 Online:2005-02-28

摘要:  应用沉淀法合成纳米羟基磷灰石,并以电泳沉积法在粗糙化的钛表面制备纳米结构的羟基磷灰石涂层.纳米涂层有利于保持羟基磷灰石的化学组成和结构,制备的涂层均匀并且无裂缝,烧结后涂层仍保持纳米结构,其烧结温度也明显降低。钛表面经化学处理后,可形成很多微孔和TiO2薄层,增强了涂层和基体之间的结合.涂层的结合力为 18±2. 5MPa,硬度和杨式模量分别为 32. 0和 2. 4GPa.

关键词: 羟基磷灰石, 纳米涂层, 电泳沉积

Abstract: A hydroxyapatite coating with nano-structure on the roughened titanium surface was prepared by electrophoretic deposition process. To decrease sintering temperature the HAp nanoparticles synthesizedby a wet chemical method was used. It is observed that the coating is uniform without cracks. After sintering the nano-strueture of HAp coating remains unchanged. The surface treatment of Ti is applied to form a distribution of small pits and TiO_2thin layer that improve the adhesion of coatingto Ti substrate. It is shown that the bonding strength of coating is as high as 18±2.5MPa. The hardness and Young's modulus are 40.6 and 0.42 GPa, respectively.

Key words: Hydroxyapatite, Nano coating, Electrophoretic deposition

中图分类号: