欢迎访问《电化学(中英文)》期刊官方网站,今天是

电化学(中英文) ›› 1999, Vol. 5 ›› Issue (2): 152-156. 

• 研究论文 • 上一篇    下一篇

孔蚀阴极保护电位测试方法的研究

许淳淳,刘幼平,张晓波,赵旭辉   

  1. 北京化工大学应用化学系
  • 收稿日期:1999-05-28 修回日期:1999-05-28 出版日期:1999-05-28 发布日期:1999-05-28

A Study on the Cathode Protection Potential Against Pitting Corrosion

Xu ChunchunLiu YoupingZhang XiaoboZhao Xuhui   

  1. (Dept. of Appl. Chem., Beijing Univ. of Chem. Techn.,Beijing100029
  • Received:1999-05-28 Revised:1999-05-28 Published:1999-05-28 Online:1999-05-28

摘要: 采用模拟闭塞电池法和模拟闭塞区溶液法测定了0Cr18Ni9奥氏不锈钢0.5mol·L-1NaCl溶液体系在孔蚀的不同阶段孔内外间电流的换向电位ET.结果表明,在一定的范围内,ET值随闭塞区溶液组成的变化而变化.将ET与由孔蚀滞后环法于不同扫描速度和不同回扫电流所测得的孔蚀保护电位EP值作比较,发现EP值范围处于ET值范围之内,定义ET的下限值-440mV为孔蚀阴极保护电位

关键词: 局部腐蚀, 换向电位, 闭塞电池, 保护电位

Abstract: The methods have been developed to determine the protection potential against pitting corrosion. They are based on the theory that the pitting protection potential(Ep) is actually the transition potential of the direction of current between the occluded cell and the external surface (ET).ET lasts from -220 mV to -440 mV(SCE), the lowest of which can be considered as cathode protection potential. The Ep values determined with cyclic potentiodynamic polarization method is included in the ET with above methods.

Key words: Partial corrosion, Transition potential, Occluded cell, Protection potential.

中图分类号: