用流铸法制备MCFC隔膜的性能研究

电化学（中英文） ›› 1998, Vol. 4 ›› Issue (4): 406-413.

用流铸法制备MCFC隔膜的性能研究

林化新,衣宝廉,李乃朝,曲天锡,张恩浚,孔连英,程英才

中国科学院大连化学物理研究所

收稿日期:1998-11-28 修回日期:1998-11-28 出版日期:1998-11-28 发布日期:1998-11-28

The Study on the Performance of MCFC Matrix Prepared by Flow Cast

Lin Huaxin Yi Baolian Li Naichao Qu Tianxi Zhang Enjun Kong Lianyin Chen Yingcai

(Dalian Inst. of Chem. Phys., Chinese Acad. of Sci.,Dalian 116023

Received:1998-11-28 Revised:1998-11-28 Published:1998-11-28 Online:1998-11-28

摘要/Abstract

摘要： 用流铸法制备电池隔膜，工艺简单易行，膜的质量有保证且易重复．其平均孔半径为０．１８ｕｍ，孔隙率６４．４％左右．在２００ｍＡ／ｍ２放电时，用此膜组装的ＭＣＦＣ电池的电压高达０．８５４Ｖ．其他电化学性能也达到９０年代初世界水平．

关键词: 电池隔膜, 流铸法, 孔分布, MCFC性能

Abstract: The matrix for MCFC were prepared by flow cast technique which gives reproducible and reliable results. Its mean pore radius is about 0.18 μm, and the porosity is about 65%. The performance of MCFC stacked with this type of matrix is 0.854 V at 200 mA/cm 2.

中图分类号:

TM910.3

林化新, 衣宝廉, 李乃朝, 曲天锡, 张恩浚, 孔连英, 程英才. 用流铸法制备MCFC隔膜的性能研究[J]. 电化学（中英文）, 1998, 4(4): 406-413.

Lin Huaxin Yi Baolian Li Naichao Qu Tianxi Zhang Enjun Kong Lianyin Chen Yingcai . The Study on the Performance of MCFC Matrix Prepared by Flow Cast[J]. Journal of Electrochemistry, 1998, 4(4): 406-413.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://electrochem.xmu.edu.cn/CN/

https://electrochem.xmu.edu.cn/CN/Y1998/V4/I4/406

[1]	林化新, 衣宝廉, 周利, 何长青, 孔连英, 张恩浚. 隔膜和熔融碳酸盐燃料电池 (MCFCS)性能的研究(英文)[J]. 电化学（中英文）, 2001, 7(1): 109-119.
[2]	林化新, 衣宝廉, 孔连英, 张恩浚, 周利, 王凤霞. MCFC隔膜用γ-LiAlO_2 粗细匹配料制备研究[J]. 电化学（中英文）, 2000, 6(1): 57-64.