欢迎访问《电化学(中英文)》期刊官方网站,今天是 分享到:

电化学(中英文) ›› 2009, Vol. 15 ›› Issue (2): 163-169.  doi: 10.61558/2993-074X.1973

• 研究论文 • 上一篇    下一篇

硅烷化学改性环氧涂层的耐蚀性能

刘倞;季卫刚;胡吉明;张鉴清;曹楚南;   

  1. 浙江大学化学系;中国人民解放军第三军医大学化学教研室;中国科学院金属研究所金属腐蚀与防护国家重点实验室;
  • 收稿日期:2009-05-28 修回日期:2009-05-28 出版日期:2009-05-28 发布日期:2009-05-28

Corrosion Performance of Epoxy Coatings by Chemical Modification with Silanes

LIU Liang1,JI Wei-gang1,2,HU Ji-ming1,ZHANG Jian-qing1,3,CAO Chu-nan1,3   

  1. (1.Department of Chemistry,Zhejiang University,Hangzhou 310027,China;2.Department of Chemistry,Third Military Medicine University,Chongqing 400038,China;3.State Key Laboratory for Corrosion and Protection,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China
  • Received:2009-05-28 Revised:2009-05-28 Published:2009-05-28 Online:2009-05-28

摘要: 利用"活性"与"非活性"硅烷化学改性环氧涂层以提高其耐蚀性."活性"硅烷指含有可以与环氧树脂的环氧端基发生开环反应官能团的硅烷,通常为氨基硅烷;"非活性"硅烷指不与环氧端基发生反应,但在有机锡催化剂存在下可与环氧树脂骨架上的羟基发生缩合反应的硅烷.红外光谱显示,两类硅烷均可成功接枝在环氧树脂上.电化学阻抗谱(EIS)和加速腐蚀试验(Machu试验)测试表明,经硅烷化学改性后的环氧涂层均能提高其耐蚀性能.

关键词: 环氧涂层, 化学改性, 硅烷, 耐蚀性能

Abstract: The improvement of corrosion performance of epoxy coatings by modification with "active" and "non-active" silanes is presented."Active" silanes are defined as ones having functional groups that can react with the epoxy groups in the epoxy resin,usually amino-silanes."Non-active" silanes are defined as ones not reacting with the epoxy groups,but can react with the hydroxyl groups in the epoxy backbone by the condensation reactions under the catalysis of organic tin compounds.The FTIR results showed that both the "active" and "non-active" silanes had been successfully grafted onto the epoxy resin.Electrochemical impedance spectroscopy(EIS) and accelerated corrosion test(Machu test) showed that the corrosion performance of epoxy coatings could be improved by chemical modification with both the "active" and "non-active" silanes.

Key words: epoxy resin, chemical modification, silane, corrosion performance

中图分类号: