[1] Bard A J, Fan F R F, Pierce D T, et al. Chemical Imaging of surfaces with the scanning electrochemical microscope[J]. Science, 1991, 254(5028): 68-74.
[2] Bard A J, Fan F R F, Kwak J, et al. Scanning electrochemical microscopy. Introduction and principles[J]. Analytical Chemistry, 1989, 61(2): 132-138.
[3] Isaacs H S. The localized breakdown and repair of passive surfaces during pitting[J]. Journal of Electroanalytical Chemistry, 1989, 29(2/3): 313-323.
[4] Lin C J(林昌健), Li Y(李彦), Lin B(林斌), et al. Developments of Scanning electrochemical probes and their applications in studying of localized corrosions[J]. Journal of Electrochemistry(电化学), 2009, 15(2): 121-128.
[5] Niu L, Yin Y H, Guo W K, et al. Application of scanning electrochemical microscope in the study of corrosion of metals[J]. Journal of Materials Science, 2009, 44(17): 4511-4521.
[6] Luo H(骆鸿), Wei D(魏丹), Dong C F(董超芳) et al. Development of electrochemical studies in microzone of metallic corrosion (1) scanning electrochemical microscopy[J]. Corrosion and Protection (腐蚀与防护), 2009, 30(7): 437-441.
[7] Wang L W(王力伟), Li X G(李晓刚), Du C W(杜翠微), et al. Recent advances in local electrochemical measurement techniques and appolications in corrosion research[J]. Journal of Chinese Society for Corrosion and Protection (中国腐蚀与防护学报), 2010, 30(6): 498-504.
[8] Wittstock G, Burchardt M, Pust S E, et al. Scanning electrochemical microscopy for direct imaging of reaction rates[J]. Angewandte Chemie-International Edition, 2007, 46(10): 1584-1617.
[9] Sun P, Laforge F O, Mirkin M V. Scanning electrochemical microscopy in the 21st century[J]. Physical Chemistry Chemical Physics, 2007, 9(7): 802-823.
[10] Kwak J, Bard A J. Scanning electrochemical microscopy. Apparatus and two-dimensional scans of conductive and insulating substrates[J]. Analytical Chemistry, 1989, 61(17): 1794-1799.
[11] Horrocks B R, Schmidtke D, Heller A, et al. Scanning electrochemical microscopy. 24. Enzyme ultramicroelectrodes for the measurement of hydrogen-peroxide at surfaces[J]. Analytical Chemistry, 1993, 65(24): 3605-3614.
[12] Alpuche-Aviles M A, Wipf D O. Impedance feedback control for scanning electrochemical microscopy[J]. Analytical Chemistry, 2001, 73(20): 4873-4881.
[13] Keddam M, Portail N, Trinh D, et al. Progress in scanning electrochemical microscopy by coupling with electrochemical impedance and quartz crystal microbalance[J]. Chemphyschem, 2009, 10(18): 3175-3182.
[14] Wipf D O, Bard A J. Scanning Electrochemical Microscopy.7. Effect of heterogeneous electron-transfer rate at the substrate on the tip feedback current[J]. Journal of the Electrochemical Society, 1991, 138(2): 469-474.
[15] Wipf D O, Bard A J. Scanning Electrochemical Microscopy.10. High-resolution imaging of active-sites on an electrode surface[J]. Journal of the Electrochemical Society, 1991, 138(5): L4-L6.
[16] Bard A J, Mirkin M V, Unwin P R, et al. Scanning electrochemical microscopy .12. theory and experiment of the feedback mode with finite heterogeneous electron-transfer kinetics and arbitrary substrate size[J]. Journal of Physical Chemistry, 1992, 96(4): 1861-1868.
[17] Wei C, Bard A J, Mirkin M V. Scanning electrochemical microscopy.31. application of secm to the study of charge-transfer processes at the liquid-liquid interface[J]. Journal of Physical Chemistry, 1995, 99(43): 16033-16042.
[18] da Silva C G, Margarit-Mattos I C P, Mattos O R, et al. The molybdate-zinc conversion process[J]. Corrosion Science, 2009, 51(1): 151-158.
[19] Eckhard K, Schuhmann W, Maciejewska M. Determination of optimum imaging conditions in AC-SECM using the mathematical distance between approach curves displayed in the impedance domain[J]. Electrochimica Acta, 2009, 54(7): 2125-2130.
[20] Liu X L, Zhang T, Shao Y W, et al. Effect of alternating voltage treatment on the corrosion resistance of pure magnesium[J]. Corrosion Science, 2009, 51(8): 1772-1779.
[21] Yin Y H, Niu L, Lu M, et al. In situ characterization of localized corrosion of stainless steel by scanning electrochemical microscope[J]. Applied Surface Science, 2009, 255(22): 9193-9199.
[22] Zhou H R, Li X G, Dong C F, et al. Corrosion behavior of aluminum alloys in Na2SO4 solution using the scanning electrochemical microscopy technique[J]. International Journal of Minerals Metallurgy and Materials, 2009, 16(1): 84-88.
[23] Zhu R K, Luo J L. Investigation of stress-enhanced surface reactivity on Alloy 800 using scanning electrochemical microscopy[J]. Electrochemistry Communications, 2010, 12(12): 1752-1755.
[24] Yuan Y, Li L, Wang C, et al. Study of the effects of hydrogen on the pitting processes of X70 carbon steel with SECM[J]. Electrochemistry Communications, 2010, 12(12): 1804-1807.
[25] Gonzalez-Garcia Y, Santana J J, Gonzalez-Guzman J, et al. Scanning electrochemical microscopy for the investigation of localized degradation processes in coated metals[J]. Progress in Organic Coatings, 2010, 69(2): 110-117.
[26] Souto R M, Gonzalez-Garcia Y, Izquierdo J, et al. Examination of organic coatings on metallic substrates by scanning electrochemical microscopy in feedback mode: Revealing the early stages of coating breakdown in corrosive environments[J]. Corrosion Science, 2010, 52(3): 748-753.
[27] Santana J J, Gonzalez-Guzman J, Izquierdo J, et al. Sensing electrochemical activity in polymer-coated metals during the early stages of coating degradation by means of the scanning vibrating electrode technique[J]. Corrosion Science, 2010, 52(12): 3924-3931.
[28] Souto R M, Fernandez-Merida L, Gonzalez S. SECM imaging of interfacial processes in defective organic coatings applied on metallic substrates using oxygen as redox mediator[J]. Electroanalysis, 2009, 21(24): 2640-2646.
[29] Souto R M, Gonzalez-Garcia Y, Gonzalez S. Characterization of coating systems by scanning electrochemical microscopy: Surface topology and blistering[J]. Progress in Organic Coatings, 2009, 65(4): 435-439.
[30] Souto R M, Gonzalez-Garcia Y, Gonzalez S, et al. Imaging the origins of coating degradation and blistering caused by electrolyte immersion assisted by SECM[J]. Electroanalysis, 2009, 21(23): 2569-2574.
[31] Gonzalez-Garcia Y, Mol J M C, Muselle T, et al. SECM study of defect repair in self-healing polymer coatings on metals[J]. Electrochemistry Communications, 2011, 13(2): 169-173.
[32] Malik M A, Kulesza P J, Pawlowska G. Surface analysis with scanning electrochemical microscopy in the feedback mode: Monitoring of reactivity and pitting precursor sites on the Nd-Fe-B-type magnet[J]. Electrochimica Acta, 2009, 54(23): 5537-5543.
[33] Walsh D A, Li L E, Bakare M S, et al. Visualisation of the local electrochemical activity of thermal sprayed anti-corrosion coatings using scanning electrochemical microscopy[J]. Electrochimica Acta, 2009, 54(20): 4647-4654.
[34] Blanc C, Pebere N, Tribollet B, et al. Galvanic coupling between copper and aluminium in a thin-layer cell[J]. Corrosion Science, 2010, 52(3): 991-995.
[35] Pust S E, Salomo M, Oesterschulze E, et al. Influence of electrode size and geometry on electrochemical experiments with combined SECM-SFM probes[J]. Nanotechnology, 2010, 21(10): 105709-105720.
[36] Xia Y, Cao F H, Chang L R, et al. Corrosion micro- and macro-electrochemical behavior of rusted carbon steel and weathering steel[J]. Chemical Journal of Chinese University(高等学校化学学报), 2013, 34(5): 1246-1253.
[37] Xia Y, Cao F H, Liu W J, et al. The formation of passive films of carbon steel in borate buffer and their degradation behavior in NaCl solution by SECM[J]. International Journal of Electrochemical Science, 2013, 8: 3057-3073
[38] Liu W J, Cao F H, Xia Y, et al. Localized corrosion of magnesium alloys in NaCl solutions explored by scanning electrochemical microscopy in feedback mode[J]. Electrochimica Acta, 2012, submitted
[39] Souto R M, Gonalez-Garcia Y, Gonzalez S. In situ monitoring of electroactive species by using the scanning electrochemical microscope. Application to the investigation of degradation processes at defective coated metals[J]. Corrosion Science, 2005, 47(12): 3312-3323.
[40] Volker E, Inchauspe C G, Calvo E J. Scanning electrochemical microscopy measurement of ferrous ion fluxes during localized corrosion of steel[J]. Electrochemistry Communications, 2006, 8(1): 179-183.
[41] Cornut R, Lefrou C. New analytical approximation of feedback approach curves with a microdisk SECM tip and irreversible kinetic reaction at the substrate[J]. Journal of Electroanalytical Chemistry, 2008, 621(2): 178-184.
