欢迎访问《电化学(中英文)》期刊官方网站,今天是
研究论文

交流阻抗法研究铝合金表面脉冲氧化膜

  • 杜爱玲
展开
  • 山东工业大学化学工程系!济南250061,山东工业大学化学工程系!济南250061,山东工业大学化学工程系!济南250061

收稿日期: 1999-08-28

  修回日期: 1999-08-28

  网络出版日期: 1999-08-28

The AC impedance Analysis for Pluse Oxide Film of Aluminium Alloy

  • Du Ailing  Ma Xicheng Zhang Heming
Expand
  • (Dept.of Chem.Eng.,Shangdong University of Technology Jinan 250061

Received date: 1999-08-28

  Revised date: 1999-08-28

  Online published: 1999-08-28

摘要

本 文采用宽 频阻抗 法首次测 得了 铝合 金表 面 脉冲 氧化 膜 的 Bode 图 .实 验表 明: 脉冲氧化膜 与直流 氧化膜的 主要差别 在于多 孔层,脉 冲氧化膜 比较 均匀, 基本 无缺 陷.通 过显 微观 察及 V I 特性 曲线等测 定手段, 进一步佐 证了交 流阻抗测 试的部分 结果.

本文引用格式

杜爱玲 . 交流阻抗法研究铝合金表面脉冲氧化膜[J]. 电化学, 1999 , 5(3) : 319 -325 . DOI: 10.61558/2993-074X.2722

Abstract

Bode diagrams for aluminum PC (abbreviated from pulse current) oxide films were first obtained by AC impedance measurements in a wide range of frequency.The experimental results show that different kinds of electrical equivalent circuits can be used for representing PC films and DC (abbreviated from direct current) oxide films separately,the main differences between them are their porous layers,the PC films are more even with little defects.Those are also verified by SEM and V I characteristic curve measurements.

参考文献

1  李 素琴,段 绍范等.铝 合金脉 冲硬质氧 化工艺 与膜层性 能的研究 .材料保 护,1 994 ,27(3) :6 ~9 2  杜 爱玲,侯 文涛,马希 骋.摩托 车活塞的 硬质氧 化处理. 材料保护 ,1998 ,31(7) :33 ~34 3   Kazuo Yokoya m a , Hidetaka Konno ,et al . Advantages of pulse Anodizing . Plating and Surface finishin g ,198 2 ,67(7) :62 ~67 4   Hitzig J, Juttner K, Lorenz W J. A C Im pedance Measure m ents on Corroded Porous Alu minu m Oxide Film s . J. Electroche m . Soc ,1986 ,133(5) :887 ~892
文章导航

/