欢迎访问《电化学(中英文)》期刊官方网站,今天是
研究论文

烧结温度对Ru-Ir-Sn氧化物阳极涂层性能的影响

  • 嵇雷 ,
  • 王均涛 ,
  • 许立坤 ,
  • 刘文彬 ,
  • 薛桂林
展开
  • 哈尔滨工程大学材料科学与化学工程学院,海洋腐蚀与防护国家重点实验室中船重工725所青岛分部,海洋腐蚀与防护国家重点实验室中船重工725所青岛分部,哈尔滨工程大学材料科学与化学工程学院,哈尔滨工程大学材料科学与化学工程学院 黑龙江哈尔滨150001,海洋腐蚀与防护国家重点实验室,中船重工725所青岛分部,山东青岛266071,山东青岛266071,山东青岛266071,黑龙江哈尔滨150001,黑龙江哈尔滨150001

收稿日期: 2008-05-28

  修回日期: 2008-05-28

  网络出版日期: 2008-05-28

The Effect of Annealed Temperature On Properties of Ru-Ir-Sn Oxide Anode Coatings

  • JI Lei ,
  • WANG Jun-tao ,
  • XU Li-kun ,
  • LIU Wen-bin ,
  • XUE Gui-lin
Expand
  • (1.Departement of Material Science and Chemical Enginering of Harbin Engineering University,Harbin 150001,China;2.State Key Laboratory for Marine Corrosion and Protection,Qingdao Branch of Luoyang Ship Material Research Institute,Qingdao 266071,Shandong,China

Received date: 2008-05-28

  Revised date: 2008-05-28

  Online published: 2008-05-28

摘要

应用溶胶凝胶法制备不同焙烧温度的氧化物阳极涂层,SEM,EDX,XRD、强化电解寿命、循环伏安和电化学阻抗等测试表明,烧结温度对阳极涂层的表面形貌以及电化学性能有着很大的影响.随着烧结温度的升高,析氯电位相应增加,寿命相对较长,循环伏安电量与双电层电容值有所下降.

本文引用格式

嵇雷 , 王均涛 , 许立坤 , 刘文彬 , 薛桂林 . 烧结温度对Ru-Ir-Sn氧化物阳极涂层性能的影响[J]. 电化学, 2008 , 14(2) : 205 -209 . DOI: 10.61558/2993-074X.1892

Abstract

The anode coatings of Ru-Ir-Sn oxide were prepared by sol-gel method with different annealed temperatures.The influences of annealed temperature in properties of anode coatings were characterized by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),potential of chlorine evolution,accelerated life,cyclic voltammetry and electrochemical impedance spectroscopy(EIS) tests.The results showed that the annealed temperature affected the morphology of coatings,while the electric quantities of cyclic voltammetry and double layer capacitances of anode coatings had a tendency to fall down and the potential of chlorine evolution and accelerated life had a tendency to increase as the annealed temperature increased.

参考文献

[1]Beer H B.Electrochemical properties of mixed metaloxide coated titanuim anodes in sea water:U S,3711385[P].1973. [2]Pilla A S.Evaluation of anode deactivation in chlor-al-kali cells[J].J Appl Electrochemical,1997,27:1283. [3]Wang TY,Xu L K,Chen G Z.Electrochemical prop-erties of mixed metal oxide coated titanium anodes insea water[J].Electrochemical,2002,8(2):172-175. [4]Wang X,Tang D,Zhou J G.Microstructure,mophologyand electrochemical property of RuO270SnO230mol%and RuO230SnO270mol%coatings[J].Alloys andCompounds,2007,(430):60-66. [5]Ailton J Terezo,Ernesto C Pereira.Preparation andcharacterisation of Ti/RuO2anodes obtained by sol-geland conventional routes[J].Materials Letters,2001,339-345. [6]Panic V,Dekanski A,Wang G,et al.Morphology ofRuO2-TiO2coatings and TEM characterization of oxidesols used for their preparation[J].Journal of Colloidand Interface Science,2003,263:68-73. [7]Panic V,Dekanski A,Milonjic S,etal.The influenceof the aging time of RuO2and TiO2sols on the electro-chemical properties and behavior for the chlorine evolu-tion reaction of activated titanium anodes obtained bythe sol-gel procedure[J].Electrochimica Acta,2000,46:415-421. [8]Panic V V,Dekanski A,Milonjic S K,et al.RuO2-TiO2coated titanium anodes obtained by the sol-gel pro-cedure and their electrochemical behaviour in the chlo-rine evolution reaction[J].Colloids and Surfaces,1999,57:269-274. [9]Mattos-Costa F I,Lima-Neto P de.Machado S A S,etal.Characterization of surfaces modified by sol-gel de-rived RuxIr1-xO2coatings for oxygen evolu-tion in acidmedium[J].Electrochimica Acta,1998,44:1515-1523. [10]Trasatti S.Physical electrochemistry of ceramic oxide[J].Electrochim Acta,1991,36(2):225. [11]Xu L K,Scantlebury J D.A study on the deactivationof an IrO2Ta2O5coated titanium anode[J].CrossionScience,2003,45:2735. [12]Kerner Z,Pajkossy T.On the origin of capacitancedispersion of rough electrodes[J].Electrochimica Ac-ta,2000,46:207.
文章导航

/