欢迎访问《电化学(中英文)》期刊官方网站,今天是
研究论文

钝性合金摩擦电化学性质的影响因素

  • 孙冬柏
展开
  • UNDP/国家科委-北京腐蚀与防护中心,冶金工业部腐蚀、磨蚀与表面技术开放研究实验室,北京科技大学

收稿日期: 1999-05-28

  修回日期: 1999-05-28

  网络出版日期: 1999-05-28

The Influential Factors on the Triboelectrochemical Behaviors of the Passive Alloys

  • Sun DongbaiLi TaoYu HongyingYang Dejun
Expand
  • (The CorrosionErosion and Surface Technology Laboratory of the Ministry of Metallurgy Industry of China Department of Surface Technology and Corrosion Engineering,Univ.of Science & Technology Beijing,Beijin

Received date: 1999-05-28

  Revised date: 1999-05-28

  Online published: 1999-05-28

摘要

研究了不同Cr含量的Fe_Cr合金在H2SO4溶液体系中的摩擦腐蚀过程.重点考察了载荷、摩擦速度、Cr含量及H2SO4溶液浓度对摩擦电流密度的影响.结果表明:当摩擦仅作用在金属部分表面时,在钝化电位区,外加载荷和摩擦速度对摩擦电流密度有较大的影响.合金材料耐蚀性的增加或溶液腐蚀性的降低,都将有利于降低Fe_Cr合金材料在H2SO4溶液体系中的流失速度

本文引用格式

孙冬柏 . 钝性合金摩擦电化学性质的影响因素[J]. 电化学, 1999 , 5(2) : 140 -144 . DOI: 10.61558/2993-074X.3166

Abstract

The tribocorrosion process of Fe_Cr alloys with different Cr content in H2SO4 solution was investigated.The influence of applied load, friction velocity, Cr content and concentration of H2SO4 in solution on the triboelectrochemical behaviors of the alloys was analyzed. It is shown that applied load and friction velocity have singnificant influence on the tribocurrent density in passive region when friction process occurs on part of the surface of alloy.Increasing the corrosion resistance of alloys or decreasing the aggressive of the solution can reduce the alloy removal velocity.

参考文献

1孙冬柏,李涛等.钝性金属材料摩擦电池的形成和作用.电化学,1998,4(3):307~2132孙冬柏.金属擦伤裸表面的活性.再钝化及影响因素的研究:[博士学位论文].北京:北京科技大学,1992,41~6
文章导航

/