欢迎访问《电化学(中英文)》期刊官方网站,今天是
研究论文

从废铁屑电解制备纯铁及其腐蚀特性

  • 曹为民 ,
  • 印仁和 ,
  • 严惠根 ,
  • 叶志强
展开
  • 上海大学理学院化学系,上海大学理学院化学系,上海大学理学院化学系,上海大学理学院化学系 上海200436 ,上海200436 ,上海200436 ,上海200436

收稿日期: 2003-02-28

  修回日期: 2003-02-28

  网络出版日期: 2003-02-28

Pure Iron Electrolyzed from Scrap Iron Chips and its Corrosion Characteristics

  • Cao Wei_min ,
  • Yin Ren_he ,
  • Yan Hui_Ceng ,
  • Ye Zhi_qiang
Expand
  • (Dept.Chem.Shanghai University,Shanghai 200436,China)

Received date: 2003-02-28

  Revised date: 2003-02-28

  Online published: 2003-02-28

摘要

以工业废铁屑作原料制备高纯度电解铁,并优化了在氯化物溶液中的电解工艺条件,所得样品纯度最高可达到99.983%.通过SEM断面形貌观察,该电解铁样品非常致密.交流阻抗及腐蚀速率测定表明,电解铁的纯度越高,其耐腐蚀性能越好.

本文引用格式

曹为民 , 印仁和 , 严惠根 , 叶志强 . 从废铁屑电解制备纯铁及其腐蚀特性[J]. 电化学, 2003 , 9(1) : 93 -97 . DOI: 10.61558/2993-074X.1491

Abstract

The high purity electrolytic iron was made from scrap iron chips. Electrolytic conditions of pure iron were determined in chloride baths and the highest purity was 99.983% by chemical analysis. Pure iron had very compact texture and high mechanical strength by SEM figures of cross section. In deaerated 0.5 kmol·m-3H2SO4 and 0.5 kmol·m-3NaCl solutions, the corrosion rate of iron decreased with increasing purity.
文章导航

/