纳米电容器的组建及电化学性能

刘玲; 周琴; 贾能勤; 江志裕

doi:10.61558/2993-074X.1626

电化学 >

2005 , Vol. 11 >Issue 2: 125 - 128

DOI: https://doi.org/10.61558/2993-074X.1626

研究论文

纳米电容器的组建及电化学性能

刘玲 ,
周琴 ,
贾能勤 ,
江志裕

展开

复旦大学化学系,复旦大学化学系,复旦大学化学系,复旦大学化学系上海200433 ,上海200433 ,上海200433 ,上海200433

收稿日期: 2005-05-28

修回日期: 2005-05-28

网络出版日期: 2005-05-28

收起

Fabrication of Nano Capacitor and its Electrical Properties

LIU Ling ,
ZHOU Qin ,
JIA Neng-qin ,
JIANG Zhi-yu~

Expand

(Department of Chemistry, Fudan University, Shanghai 200433,China

Received date: 2005-05-28

Revised date: 2005-05-28

Online published: 2005-05-28

Fold

摘要

用逐层组装法在阳极氧化铝模板的纳米孔内制备纳米电容器,其组成为电化学聚合PPy/电沉积TiO2多孔隔膜/化学聚合PPy.该纳米电容器显示了典型的电化学超电容性质,且具有良好的充放电性能.

关键词： 纳米电容器; 阳极氧化铝膜; 电化学超电容器; 聚吡咯

本文引用格式

刘玲 , 周琴 , 贾能勤 , 江志裕 . 纳米电容器的组建及电化学性能[J]. 电化学, 2005 , 11(2) : 125 -128 . DOI: 10.61558/2993-074X.1626

Abstract

A step-by-step assembling method was developed for preparing nano capacitors using anodic aluminum oxide (AAO) membrane as templates. The nano capacitor consisted of three parts: electrochemically polymerized PPy electrode/ el ectrochemically precipitated porous TiO_(2) separator / chemically polymerized PPy electrode, and demonstrated the charge/discharge behavior as a typical electrochemical supercapacitor with good cyclic ability.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract