冷凝器的腐蚀在氯碱工业中极为严重,并可酿成致命事故.常压冷凝器制造通常采用的钢材为16MnR和10#,焊接材料为J507.本文研究了上述3种材料在29.9%(by mass)的氯化钙溶液中的电化学行为,分析其腐蚀电流密度icorr和电化学阻抗参数变化规律.结果表明,在16MnR、10#和焊接材料的三相区,焊接材料腐蚀较快,为整体结构的薄弱点,因此氯气冷凝器需要定期检测和修复.
Corrosion of condenser is very seriously in chlorine-alkali industry,which could lead to fatal disaster.The most commonly used material in low pressure condenser includes steel of 16MnR,10#,and welding rod of J507.Electrochemical analysis of the three materials in 29.9%(by mass) calcium chloride(CaCl2) solution was carried out.The corrosion current density icorr and impedance parameters of the three materials in 29.9% CaCl2 solution were estimated separately.The result showed that in the tripartite phase regions where the 10# seamless tube and 16MnR armor plate were jointed by welding,the weld was firstly eroded and suggested that the chlorine condenser should be examined and repaired every year.
[1]Hu Dongsheng(胡东升).Reason analysis and controlmeasure of chlorine condenser corrosion perforation[J].Journal of Suzhou University(in Chinese),2002,5:22.
[2]Zhang Yuansheng(张远声).Corrosion destroyed acci-dent[M].Beijing:Chemical Industry Press,2000.
[3]Zhang Jintao,Hu Jiming,Zhang Jianqing,et al.Stud-ies of water transport behavior and impedance models ofepoxy-coated metals in NaCl solution By EIS[J].Pro-gress in Organic Coatings,2004,51:145-151.
[4]Cao Chunan(曹楚南).Principles of corrosion electro-chemistry[M].Beijing:Chemical Industry Press,2004.
[5]Xiang Bin(向斌),Xing Shaohua(邢少华),ZhangShengtao(张胜涛).Study the corrosion of chlorine con-denser by ICT[J].Corrosion Science and ProtectionTechnology,2005:5:352.
[6]Hemmingsen T,Hovdan H,Sanni P,et al.The influ-ence of electrolyte reduction potential on weld corrosion[J].Electrochimica Acta,2004,47:3949-3955.
