应用慢应变速率拉伸试验和电化学方法研究了湿硫化氢溶液中UNS J91450不锈钢的电化学行为对应力腐蚀开裂的影响.结果表明,本实验条件下UNS J91540不锈钢具有较高的SCC敏感性,并随着溶液pH的降低而明显增大.该不锈钢的电化学行为对它的腐蚀开裂(SCC)敏感性具有重要影响.开路电位下该不锈钢的SCC行为同时受氢脆作用和裂纹尖端阳极溶解作用的影响.在pH较低的介质中析氢电流较高而裂纹尖端阳极溶解作用略低,而在pH较高的介质中析氢电流较低而裂纹尖端的阳极溶解作用相对增强.氢脆作用对UNS J91540不锈钢SCC敏感性影响更显著.
刘智勇
,
董超芳
,
李晓刚
,
王立贤
. H_2S环境中UNS J91540不锈钢的电化学行为对SCC的影响[J]. 电化学, 2009
, 15(2)
: 157
-162
.
DOI: 10.61558/2993-074X.1972
Effect of electrochemical behaviours on stress corrosion cracking(SCC) of UNS J91450 stainless steel in hydrogen sulfide environment was investigated using slow-strain-rate test(SSRT) and electchemial techniques.Results show that UNS J91540 stainless steel was susceptible to SCC in varying H2S solutions,and the SCC susceptibility reduced with the increase of pH value.The electrochemical property plays an important role in the SCC occurrence,as a combined effect of hydrogen embritlement and anodic dissolution at SCC cracktip at open circuit potential.In the solution with a lower pH the hydrogen revolution was intensive and the cracktip anodic dissolution was weaker,however,in the higher pH solution the reaction of hydrogen revoluting was less intensive and the cracktip anodic dissolution intensifie.Hydrogen embrittlement exhibited more important impact on SCC occurrence of UNS J91540 stainless steel.
[1]Anselmo N,May J E,Mariano N A,et al.Corrosionbehavior of supermartensitic stainless steel in aeratedand CO2-saturated synthetic seawater[J].Material Sci-ence and Engineering A,2006,428(1/2):73-79.
[2]Turnbull A,Nimmo B.Stress corrosion testing of wel-ded supermartensitic stainless steels for oil and gas pipe-lines[J].Corrosion Engineering Science and Technolo-gy,2005,40(2):103-107.
[3]Liao Jian-guo(廖建国).High Cr stainless steel OCTGwith high strength and superior corrosion resistance[J].Welded Pipe and Tube(in Chinese),2006,29(5):83-87.
[4]NACE-TM-0177.Laboratory testing of metals for resist-ance to sulfide stress cracking and stress corrosioncracking in H2S environments[S].Huston:NACE In-ternatioal,2005.1-25.
[5]Chen Y Y,Liou Y M,Shih H C.Stress corrosioncracking of type 321 stainless steels in simulated petro-chemical process environments containing hydrogen sul-fide and chloride[J].Material Science and EngineeringA,2005,407(1/2):114-126.
[6]Bala Srinivasan P,Sharkawy S W,Dietzel W.Hydro-gen assisted stress-cracking behaviour of electron beamwelded supermartensitic stainless steel weldments[J].Materials Science and Engineering A,2004,385(1/2):6-12.
[7]Qiao L,Mao X.The ermodynamic analysis on the roleof hydrogen in anodic stress corrosion cracking[J].Ac-ta Metallurgica et Materialia,1995,43(11):4001-4006.
[8]Boellinghaus T.Hydrogen assisted cracking of super-martensitic stainless steels[A]//In:International Con-ference on Hydrogen Effects on Material Behaviour andCorrosion Deformation Interactions[C].Moran:2003.1009-1015.
[9]Veloz M A,Gonza’ale I.Electrochemical study of car-bon steel corrosion in buffered acetic acid solutions withchlorides and H2S[J].Electrochimica Acta,2002,48:135-144.
[10]Liu Lie-wei(刘烈炜),Hu Qian(胡倩),Guo Feng(郭沨).Study on destroy process of 1Cr18Ni9Tistainless steel surface passive film by hydrogen sulfide[J].Journal of Chinese Society for Corrosion and Pro-tection(in Chinese),2002,22(11):22-26.
[11]Ramanarayanan T A,Smith S N.Corrosion of iron ingaseous environments and in gas-saturated aqueous en-vironments[J].Corrosion,1990,43(11):4001-4005.
[12]Toshimitsu Yokobori Jr A,Yasrou C,Takenao N,et al.The characteristics of hydrogen diffusion and concen-tration around a crack tip concerned with hydrogen em-brittlement[J].Corrosion Science,2002,44:407-414.