研究经NaOH处理了的MmNi3.2Al0.2Mn0.6Co1.0,再应用电沉积法制备Au改性的MmNi3.2Al0.2Mn0.6Co1.0催化剂对NaBH4的电催化氧化性能.SEM观察催化剂样品的微观形貌,线性伏安扫描法测定其电催化氧化性能,发现Au-MmNi3.2Al0.2Mn0.6Co1.0电极电催化氧化NaBH4电流密度为60 mA.cm-2,比在MmNi3.2Al0.2Mn0.6Co1.0电极的增加3.5倍.若对该电极在电解质中预浸泡10 h,则氧化电流密度可达到184 mA.cm-2.
王贵领
,
刘进程
,
孙克宁
,
曹殿学
. Au-MmNi_(3.2)Al_(0.2)Mn_(0.6)Co_(1.00)电极对NaBH_4电催化氧化[J]. 电化学, 2009
, 15(4)
: 450
-453
.
DOI: 10.61558/2993-074X.2023
In this work,the electrocatalytic activities of MmNi3.2Al0.2Mn0.6Co1.0,NaOH treated MmNi3.2Al0.2Mn0.6Co1.0 and Au-MmNi3.2Al0.2Mn0.6Co1.0 obtained after NaOH treatment(Mm: misch metal) for NaBH4 oxidation were reported.The electrodes were prepared by electrodeposition,their morphologies were analysized by SEM,their electrocatalytic properties were studied by the linear sweeping test.It was found that the oxidation current density of the Au-MmNi3.2Al0.2Mn0.6Co1.0 was 60 mA·cm-2,it was 3.5 times higher than that at the MmNi3.2Al0.2Mn0.6Co1.0 electrode.In addition,the oxidation current density at the Au-MmNi3.2Al0.2Mn0.6Co1.0 electrode immersed in the electrolyte solution for 10 hours was 184 mA·cm-2.
[1]Chen Wei(陈卫),Tang Ya-Wen(唐亚文),Lu Tian-Hong(陆天虹).Electrocatalytic performance of carbonsupported Au-Ir catalyst as cathodic catalyst in directformic acid fuel cell[J].Electrochemistry(in Chi-nese),2008,3:235-237.
[2]Wang Gui-Ling(王贵领),Lan Jian(兰剑),Cao Dian-Xue(曹殿学),et al.Recent advance in research ondirect NaBH4/H2O2fuel cells[J].J Chem Industry En-gineering(in Chinese),2008,159(4):805-813.
[3]Atwan M H,Macdonald C L B,Northwood D O,et al.Colloidal Au and Au-alloy catalysts for direct boro-hydride fuel cells:Electrocatalysis and fuel cell per-formance[J].J Power Sources,2006,158:36-44.
[4]Mirkin M V,Yang H,Bard A J.Borohydride oxidationat a gold electrode[J].J Electrochem Soc,1992,139:2212-2217.
[5]Gyenge E L.Electrooxidation of borohydride on plati-num and gold electrodes:implications for direct boro-hydride fuel cells[J].Electrochim Acta,2004,49(6):965-978.
[6]Raman R K,Choudhury NA,Shukla AK.AHigh out-put voltage direct borohydride fuel cell[J].ElectrochemSolid-State Lett,2004,7(12):A488-A491.
[7]Liu B H,Li Z P,Suda S.Electrocatalysts for the anod-ic oxidation of borohydrides[J].Electrochim Acta,2004,49:3097-3105.
[8]Choudhury NA,Raman R K,Sampath S,et al.An al-kaline direct borohydride fuel cell with hydrogen perox-ide as oxidant[J].J Power Sources,2005,143:1-8.
[9]Wang L,Ma C,Mao X.LmNi4.78Mn0.22alloy modifiedwith Si used as anodic materials in borohydride fuel cells[J].J Alloys Compounds,2005,397:313-316.
[10]Yang Z Z,Wang LB,Gao Y F,et al.LaNi4.5Al0.5al-loy doped with Au used as anodic materials in a boro-hydride fuel cell[J].Journal of Power Sources,2008,184:260-264.