复合导电添加剂对全固态锂硫电池性能影响的研究
收稿日期: 2020-05-27
修回日期: 2020-07-16
网络出版日期: 2020-07-17
基金资助
国家自然科学基金项目(21875196);国家自然科学基金项目(21935009);福建省引导性计划项目(2019H0003);厦门大学大学生创新创业训练计划项目(201810384171)
Effect of Conductive Additives on Electrochemical Performance of All-Solid-State Li-S Batteries
Received date: 2020-05-27
Revised date: 2020-07-16
Online published: 2020-07-17
使用硫化物固体电解质的全固态锂硫电池由于多硫化物不溶于硫化物固体电解质及硫化物电解质不可燃的特性,得以完全避免穿梭效应并显著提高了电池的安全性能而被认为是极具潜力的下一代储能电池。如何建立并平衡复合正极中离子/电子导电网络且维持复合正极中较高活性物质含量对于全固态锂硫电池至关重要。本文以单质硫为活性物质研究了复合导电添加剂对全固态锂硫电池性能的影响,发现以乙炔黑(AB)为导电碳材料明显优于Super P和Ketjen Black;优化复合正极的组成,发现硫:乙炔黑:固体电解质的质量比为40:20:40时,全固态锂硫电池在室温和60℃下均具有良好的电化学性能。
王东浩 , 晏鹤凤 , 龚正良 . 复合导电添加剂对全固态锂硫电池性能影响的研究[J]. 电化学, 2021 , 27(4) : 388 -395 . DOI: 10.13208/j.electrochem.200527
All-solid-state lithium sulfur batteries (ASSLSBs) with inorganic solid electrolytes offer an opportunity to realize both high energy density (lithium metal ~ 3860 mAh·g-1, sulfur ~ 1675 mAh·g-1), safety and reliability, via eliminating the polysulfides shuttle effect and flammable liquid electrolyte. However, it still remains a huge challenge for ASSLSBs to achieve high areal active mass loading, high utilization efficiency of the active materials and good cycle stability simultaneously due to the insulating nature of sulfur and Li2S (conductivities of sulfur and Li2S are 5×10-30 S·cm-1 and 3.6×10-7 S·cm-1 at room temperature, respectively), and the large volume change during cycling due to the difference in mass density between sulfur (2.03 g·cm-3) and Li2S (1.67 g·cm-3). Herein, Li7P3S11 (LPS) glass-ceramic sulfide solid electrolyte with high ionic conductivity of 1.7×10-3 S·cm-1 at room temperature was synthesized through high energy ball-milling and a two-step heat treatment. And the effect of conductive additives on electrochemical performance of ASSLSBs employing sulfur as an active material and LPS as a solid electrolyte was systematically investigated. It shows that ASSLSBs employing acetylene black (AB) as a conductive additive exhibited much better electrochemical performance with high capacity of 1681 mAh·g-1 and good rate performance at 60℃ than Super P and Ketjen Black. ASSLBs employing sulfur composite cathode with the optimized mass ratio of S:AB:solid electrolyte = 4:2:4 presented the best electrochemical performance at both room temperature and 60℃. ASSLBs employing S40-AB20-LPS40 composite cathode delivered a high capacity of 1450 mAh·g-1 with good cycling stability and high coulombic efficiency of ~100% at 60℃. And good electrochemical performance could also be obtained even at room temperature. A high initial discharge capacity of ~1270 mAh·g-1 was obtained and a high capacity of 1140 mAh·g-1 was retained after 30 cycles with high coulombic efficiency of ~100%.
[1] | Chen W, Lei T Y, Wu C Y, Deng M, Gong C H, Hu K, Ma Y C, Dai L P, Lü W Q, He W D, Liu X J, Xiong J, Yan C L. Designing safe electrolyte systems for a high-sta-bility lithium-sulfur battery[J]. Adv. Energy Mater., 2018, 8(10): 1702348. |
[2] | Hou L P, Yuan H, Zhao C Z, Xu L, Zhu G L, Nan H X, Cheng X B, Liu Q B, He C X, Huang J Q, Zhang Q. Improved interfacial electronic contacts powering high sulfur utilization in all-solid-state lithium-sulfur batteries[J]. Energy Storage Mater., 2019, 25: 436-442. |
[3] | Han F D, Yue J, Fan X L, Gao T, Luo C, Ma Z H, Suo L M, Wang C S. High-performance all-solid-state lithium-sulfur battery enabled by a mixed-conductive Li2S nanocomposite[J]. Nano Lett., 2016, 16(7): 4521-4527. |
[4] | Li X(李雪), Gong Z L(龚正良). Poly(ethylene oxide) based polymer electrolytes for all-solid-state Li-S batteries[J]. J. Electrochem.(电化学), 2020, 26(3): 338-346. |
[5] | Zhang X Q, Cheng X B, Zhang Q. Nanostructured energy materials for electrochemical energy conversion and storage: A review[J]. J Energy Chem., 2016, 25(6): 967-984. |
[6] | Yang X F, Luo J, Sun X L. Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design[J]. Chem. Soc. Rev., 2020, 49(7): 2140-2195. |
[7] | Umeshbabu E, Zheng B Z, Yang Y. Recent progress in all-solid-state lithium-sulfur batteries using high Li-ion conductive solid electrolytes[J]. Electrochem. Energ. Rev., 2019, 2(2): 199-230. |
[8] | Zhou L(周兰), Yu A S(余爱水). Current status and prospect of cathode materials for lithium sulfur batteries[J]. J. Electrochem.(电化学), 2015, 21(3): 211-220. |
[9] | Wu K(吴凯). Preparation and process optimization of cathode materials for lithium-sulfur batteries[J]. J. Electrochem.(电化学), 2020, 26(6): 825-833. |
[10] | Lin Z, Liang C D. Lithium-sulfur batteries: from liquid to solid cells[J]. J. Mater. Chem. A, 2015, 3(3): 936-958. |
[11] | Zheng B Z, Liu X S, Zhu J P, Zhao J, Zhong G M, Xiang Y X, Wang H C, Zhao W M, Umeshbabu E, Wu Q H, Huang J Y, Yang Y. Unraveling (electro)-chemical stability and interfacial reactions of Li10SnP2S12 in all-solid-state Li batteries[J]. Nano Energy, 2020, 67: 104252. |
[12] | Zhang S S. Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions[J]. J. Power Sources, 2013, 231: 153-162. |
[13] | Yang Y, Zheng G Y, Misra S, Nelson J, Toney M F, Cui Y. High-capacity micrometer-sized Li2S particles as cathode materials for advanced rechargeable lithium-ion batteries[J]. J. Am. Chem. Soc., 2012, 134(37): 15387-15394. |
[14] | Ji X L, Lee K T, Nazar L F. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries[J]. Nat. Mater., 2009, 8(6): 500-506. |
[15] | Jeon B H, Yeon J H, Kim K M, Chung I J. Preparation and electrochemical properties of lithium-sulfur polymer batteries[J]. J. Power Sources, 2002, 109(1): 89-97. |
[16] | Hakari T, Nagao M, Hayashi A, Tatsumisago M. All-solid-state lithium batteries with Li3PS4 glass as active material[J]. J. Power Sources, 2015, 293: 721-725. |
[17] | Zhang Y B, Chen R J, Liu T, Xu B Q, Zhang X, Li L L, Lin Y H, Nan C W, Shen Y. High capacity and superior cyclic performances of all-solid-state lithium batteries enabled by a glass-ceramics solo[J]. ACS Appl. Mater. Inter., 2018, 10(12): 10029-10035. |
[18] | Han Q G, Li X L, Shi X X, Zhang H Z, Song D W, Ding F, Zhang L Q. Outstanding cycle stability and rate capabilities of the all-solid-state Li-S battery with a Li7P3S11 glass-ceramic electrolyte and a core-shell S@BP2000 nanocomposite[J]. J. Mater. Chem. A, 2019, 7(8): 3895-3902. |
[19] | Yi J G, Chen L, Liu Y C, Geng H X, Fan L Z. High capacity and superior cyclic performances of all-solid-state lithium-sulfur batteries enabled by a high-conductivity Li10SnP2S12 solid electrolyte[J]. ACS Appl. Mater. Inter., 2019, 11(40): 36774-36781. |
[20] | Phuc N H H, Takaki M, Muto H, Reiko M, Kazuhiro H, Matsuda A. Sulfur-carbon nano fiber composite solid electrolyte for all-solid-state Li-S batteries[J]. ACS Appl. Mater. Inter., 2020, 3(2): 1569-1573. |
/
〈 |
|
〉 |