活性炭纤维电吸附重金属及磺胺甲恶唑性能研究

赵文君; 贾秉鑫; 张亚南; 关久念; 曲   蛟; 路   莹

doi:10.13208/j.electrochem.180823

电化学 >

2019 , Vol. 25 >Issue 6: 669 - 681

DOI: https://doi.org/10.13208/j.electrochem.180823

研究论文

活性炭纤维电吸附重金属及磺胺甲恶唑性能研究

赵文君 ,
贾秉鑫 ,
张亚南 ,
关久念 ,
曲蛟 ,
路莹

展开

东北师范大学环境学院，吉林长春，130000

收稿日期: 2018-08-23

修回日期: 2018-09-20

网络出版日期: 2019-12-28

基金资助

国家自然科学基金项目（No. 51479005, No. 51408109, No. 41877364）资助

收起

Study on Electro-Sorption of Heavy Metals and Sulfamethoxazole on Activated Carbon Fibers

ZHAO Wen-jun ,
JIA Bing-xin ,
ZHANG Ya-nan ,
GUAN Jiu-nian ,
QU Jiao ,
LU Ying

Expand

School of Environment, Northeast Normal University, Changchun Jilin, 130000, China

Received date: 2018-08-23

Revised date: 2018-09-20

Online published: 2019-12-28

Fold

摘要

使用盐酸对吸附剂活性炭纤维（activated carbon fiber，ACF）进行改性，通过SEM、BET和FTIR对改性前后的ACF形貌及结构进行系统表征发现，改性后ACF较改性前表面杂质减少且沟壑更加明显，比表面积提高22%，微孔体积增加5%，含氧官能团（C-O和C=O）明显增多. 以水中重金属离子（Zn(II)及Cr(VI)）和抗生素磺胺甲恶唑（Sulfamethoxazole，SMX）为目标污染物，研究改性后ACF对目标污染物的吸附（静吸附和电吸附）性能，考察了浓度、pH、外加电压对吸附的影响. 结果表明，ACF用量为5 g，电压为1.2 V，Zn(II)、Cr(VI)及SMX浓度均为10 mg·L^-1，Zn(II)溶液pH为5时，ACF吸附水中Zn(II)的最大吸附量为9.25 mg·g^-1，是静吸附条件的2.15倍；Cr(VI)溶液pH为4时，ACF吸附Cr(VI)的最大吸附量为8.86 mg·g^-1，是静吸附条件的1.96倍；SMX溶液pH为6时，ACF吸附SMX的最大吸附量为8.32 mg·g^-1，是静吸附条件的1.84倍. ACF吸附Zn(II)、Cr(VI)及SMX的动力学曲线均符合准二级动力学模型，吸附过程为化学吸附. Freundlich等温模型能更好地描述ACF对Zn(II)、Cr(VI)及SMX的吸附特性，其吸附形式为多分子层吸附. ACF通过电极反接方式进行循环再生，脱附速率快且脱附效果明显，经4次循环再生后，ACF对Zn(II)、Cr(VI)及SMX的去除率均在90%以上.

关键词： 活性炭纤维; 电吸附; Zn(II); Cr(VI); SMX; 循环利用

本文引用格式

赵文君 , 贾秉鑫 , 张亚南 , 关久念 , 曲蛟 , 路莹 . 活性炭纤维电吸附重金属及磺胺甲恶唑性能研究[J]. 电化学, 2019 , 25(6) : 669 -681 . DOI: 10.13208/j.electrochem.180823

Abstract

To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by 22%, while the micropore volume was increased by 5%, and the oxygen-containing functional groups (C-O, C=O) are significantly increased. Using the heavy metal ions (Zn(II), Cr(VI)) and the antibiotic Sulfamethoxazole (SMX) in water as the target pollutants, the adsorptions of ACF after hydrochloric acid modification on the target pollutants (static adsorption and electro-sorption) were studied. The effects of concentration, pH and applied voltage on adsorptions were investigated. The results showed that when the ACF dosage was 5 g, voltage was 1.2 V, Zn(II), Cr(VI) and SMX concentrations were 10 mg·L^-1, Zn(II) solution pH was 5, the maximum adsorption capacity of Zn(II) adsorbed by ACF was 9.25 mg·g^-1, which is 2.15 times of the static adsorption condition; when the pH of Cr(VI) solution was 4, the maximum adsorption amount of Cr(VI) adsorbed by ACF was 8.86 mg·g^-1, which is 1.96 times of static adsorption condition; when the pH of SMX solution was 6, the maximum adsorption capacity of ACF to adsorb SMX was 8.32 mg·g^-1, which is 1.84 times of static adsorption condition. The kinetic curves for the adsorptions of Zn(II), Cr(VI) and SMX by ACF were consistent with the pseudo-second-order kinetic model, and the adsorption process was chemical adsorption. The Freundlich isotherm model can better describe the adsorption characteristics of ACF on Zn(II), Cr(VI) and SMX, whose adsorption is multi-molecular layer adsorption. ACF was recycled by electrode reverse connection, whose desorption rate was fast and the desorption effect was obvious. After 4 cycles of regeneration, the removal rates of Zn(II), Cr(VI) and SMX by ACF were above 90%, and great regeneration efficiency, which can be reused in practical applications, saving resources.

Key words： activated carbon fiber; electro-adsorption; Zn(II); Cr(VI); sulphonamide; recycling

参考文献

[1] Xiao J J(肖静晶). Research of recovery technology of Cu and Ni from electroplating waste-water[D]. Hunan: Central South University, 2012.
[2] Mi H, Jiang Z G, Kong J. Hydrophobic poly(ionic liquid) for highly effective separation of methyl blue and chromium ions from water[J]. Polymers, 2013, 5(4): 1203-1214.
[3] Tapiero Y, Rivas B L, Sanchez J, et al. Polypropylene membranes modified with interpenetrating polymer networks for the removal of chromium ions[J]. Journal of Applied Polymer Science, 2015, 132(19): 41953-41964.
[4] Lin H(林海), Yu M L(于明利), Dong Y B(董颖博), et al. The heavy mental leaching rules and influence mechanism of different particle size of tin mining waste rock[J]. China Environmental Science(中国环境科学), 2014, 24(3): 664-671.
[5] Pasquet J, Chevalier Y, Pelletier J, et al. The contribution of zinc ions to antimicrobial activity of zinc oxide[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 457(1): 263-274.
[6] Xu Y(徐颖), Wang Q(王祺), Su M(苏墨), et al. Adsorption characteristics of sulfa antibiotics in the river sediments[J]. Journal of Safety Environment(安全与环境学报), 2016, 16(2): 278-283.
[7] Wang J L, Zhou A X, Zhang Y L, et al. Research on the adsorption and migration of sulfa antibiotics in underground environment[J]. Environment Earth Science, 2016, 75(18): 1252.
[8] Zhang D, Pan B, Zhang H, et al. Contribution of different sulfamethoxazole species to their overall adsorption on functionalized carbon nanotubes[J]. Environmental Science Technology, 2010, 44(10): 3806-3811.
[9] Yang J, Zhou M H, Zhao Y Y, et al. Electro-sorption driven by microbial fuel cells to remove phenol without external power supply[J]. Bioresource Technology, 2013, 150(3): 271-277.
[10] Mekala B, Nishith V, Kumar R S, et al. Preparation of activated carbon fibers from cost effective commercial textile grade acrylic fibers[J]. Carbon Letters, 2011, 12(1): 44-47.
[11] Zhang J J(张建军), Jiang H(姜华), Fang J H(方建慧), et al. Applications of new activated carbon meterials in the electric double-layer capacitor[J]. Journal of Electrochemistry(电化学), 2004, 10(4): 464-467.
[12] Bayram E, Ayranci E. Electrochemically enhanced removal of polycyclic aromatic basic dyes from dilute aqueous solutions by activated carbon cloth electrodes[J]. Environmental Science Technology, 2010, 44(16): 6331-6336.
[13] Utrilla R J, Prados J G, Sanchez P M, et al. Removal of nitroimidazole antibiotics from aqueous solution by adsorption/bio adsorption on activated carbon[J]. Journal of Hazardous Materials, 2009, 170(1): 298-305.
[14] Ayranci E, Hoda N. Adsorption kinetics and isotherms of pesticides onto activated carbon-cloth[J]. Chemosphere, 2005, 60(11): 1600-1607.
[15] Qiang Z M, Adams C . Potentiometric determination of acid dissociation constants (pKa) for human and veterinary antibiotics[J]. Water Research, 2004, 38(12): 2874-2890.
[16] Chen L, Chen Z H, Chen D, et al. Removal of hexavalent chromium from contaminated water by ultrasound-assisted aqueous solution ball milling[J]. Journal of Environmental Sciences, 2017, 52(2): 276-283.
[17] Gao C Y(高翠英), Li Y W(李彦威). Application of successive and simultaneous determination in water heavy metal elements analysis[J]. Guangdong Chemical Industry(广东化工), 2013, 23(40): 165-167.
[18] Xu W(徐伟), Zhang H M(张慧敏), Wu Z C(吴祖成). Electrochemical treatment of heavy metals with self-electricity generation[J]. Journal of Electrochemistry(电化学), 2013, 19(4): 345-349.
[19] Fu H Q(傅宏庆), Wang Y(王颖), Zhang D(张丹), et al. Simultaneous determination of 13 sulphonamides by high performance liquid chromatography-ultraviolet (HPLC-UV)[J]. China Animal Husbandry and Veterinary Medicine(中国畜牧兽医), 2102, 39(4): 233-237.
[20] He X S(何余生), Li Z(李忠) Xi H X(奚红霞), et al. Research progress on gas-solid adsorption isotherms[J]. Ion Exchange and Adsorption(离子交换与吸附), 2004, 20(4): 376-384.
[21] Zhang Y L, Tang Y, Qiu Q, et al. Electrochemically enhanced adsorption of aluminum from sodium carbonate solution by activated carbon fibers[J]. Industrial Engineering Chemistry Research, 2013, 52(40): 14449-14455.
[22] Chen P(陈培), Liu R L(刘润龙), Zhu D(朱丹), et al. Preparation of titanium loaded activated carbon fibers and their application in aqueous Rhodamine B photocatalytic degradation[J]. Environmental Chemistry(环境化学), 2015, 34(1): 144-149.
[23] Zhang L(张亮), Zhang H M(张红梅), Wan W H(万伟华), et al. Modifications and electrochemical properties of graphite fluoride[J]. Journal of Electrochemistry(电化学), 2018, 24(4): 385-391.
[24] Luo J W, Li X, Ge C J, et al. Sorption of norfloxacin, sulfamerazine and oxytetracycline by KOH modified biochar under single and ternary systems[J]. Bioresource Technology, 2018, 263: 385-392.
[25] Alchemic A, Conway B E. Investigation of removal of Cr(VI), Mo(VI), W(VI), V(N), and V(V) oxy-ions from industrial waste-waters by adsorption and electro-sorption at high-area carbon cloth[J]. Journal of Colloid and Interface Science, 2002, 251(2): 248-255.
[26] Yang J, Zhao Y Y, Zhang C, et al. Electrosorption driven by microbial fuel cells without electric grid energy consumption for simultaneous phenol removal and wastewater treatment[J]. Electrochemistry Communications, 2013, 34: 121-124.
[27] Yang W L, Han H X, Zhou M H, et al. Simultaneous electricity generation and tetracycline removal in continuous flow electro-sorption driven by microbial fuel cells[J]. RSC Advances, 2015, 5(61): 49513-49520.
[28] Qu G Z, Kou L Q, Wang T C, et al. Evaluation of activated carbon fiber supported nanoscale zero-valent iron for chromium(VI) removal from groundwater in a permeable reactive column[J]. Journal of Environmental Management, 2017, 201: 378-387.
[29] Zhang C L, Wang F A, Wang Y. Solubilities of sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxydiazine, sulfamonomethoxine, sulfamethoxazole, and sulfachloropyrazine in water from (298.15 to 333.15)K[J]. Journal of Chemical Engineering Data, 2007, 52(5): 1563-1566.
[30] Xie H H(谢欢欢), Zhou Y X(周元祥), Fan C C(范晨晨), et al. Study of the adsorption of heavy metal ions by modified activated carbon fibers[J]. Journal of Hefei University of Technology(Natural Science) (合肥工业大学学报（自然科学版）), 2016, 39(2): 256-259.
[31] Shrestha S, Son G, Lee S H, et al. Isotherm and thermodynamic studies of Zn(II) adsorption on lignite and coconut shell-based activated carbon fiber[J]. Chemosphere, 2013, 92(8): 1053-1061.
[32] Qiu B, Xu C X, Sun D Z, et al. Polyaniline coating on carbon fiber fabrics for improved hexavalent chromium removal[J]. RSC Advances, 2014, 4(56): 29855-29865.
[33] Huang L H, Zhou S J, Jin F, et al. Characterization and mechanism analysis of activated fiber felt-stabilized nanoscale zero-valent iron for the removal of Cr(VI) from aqueous solution[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 447: 59-66.
[34] Qiang Z M, Adams C. Potentiometric determination of acid dissociation constants (pKa) for human and veterinary antibiotics[J]. Water Research, 2004, 38(12): 2874-2890.
[35] Li H, Zheng N, Liang N, et al. Adsorption mechanism of different organic chemicals on fluorinated carbon nanotubes[J]. Chemosphere, 2016, 154: 258-265.
[36] Wu M, Pan B, Zhang D, et al. The sorption of organic contaminants on biochars derived from sediments with high organic carbon content[J]. Chemosphere, 2013, 90(2): 782-788.
[37] Pan B, Xing B S. Adsorption mechanisms of organic chemicals on carbon nanotubes[J]. Environmental Science Technology, 2008, 42(24): 9005-9013.
[38] Wu Y Q, Xu C, Zhao Y, et al. Preparation of calcium silicate-chitosan polymer and the adsorptive removal of heavy metals in wastewater[J]. Environmental Chemistry, 2016, 35(3): 562-567.
[39] Park S J, JangY S. Pore structure and surface properties of chemically modified activated carbons for adsorption mechanism and rate of Cr(VI)[J]. Journal of Colloid and Interface Science, 2002, 249(2): 458-463.
[40] Anskjær G G, Krogh K A, Halling-Sorensen B. Dialysis experiments for assessing the pH-dependent sorption of sulfonamides to soil clay fractions[J]. Chemosphere, 2014, 95(1): 116-123.
[41] Quan X(全燮), Liu M W(刘梦薇), Wang S T(王斯坦), et al. Cylindrical electrosorption filter device using activated carbon fiber as electric adsorption material: China, 201510593323.0. [P]. 2015.
[42] Sibel T, Tamer A. Zn(II) biosorption properties of Botrytis cinerea biomass[J]. Journal of Hazardous Materials, 2006, 131(1): 137-145.
[43] Dong X L, Ma L Q, Li Y C. Characteristics and mechanisms of hexavalent chromium removal by biochar from sugar beet tailing[J]. Journal of Hazardous Materials, 2011, 190(1): 909-915.
[44] Gao J A, Pedersen J A. Adsorption of sulfonamide antimicrobial agents to clay minerals[J]. Environmental Science Technology, 2005, 39(24): 9509-9516.
[45] Li X, Zhao H, Quan X, et al. Adsorption of ionizable organic contaminants on multi-walled carbon nanotubes with different oxygen contents[J]. Journal of Hazardous Materials, 2011, 186(1): 407-415.
[46] Liu M W(刘梦薇). Electrochemical assistant adsorption of two sulfonamides on activated carbon fibers[D]. Dalian: Dalian University of Technology, 2016.
[47] Xu F C(徐芳草), Wang D D(王丹丹), Xu Q D(许庆迪), et al. Research on the treatment of low concentration wastewater containing Cu²⁺ by electrosorption[J]. Guangdong Chemical Industry(广东化工), 2015, 42(23): 155-157.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献