纤维素微孔锂电隔膜的制备及性能研究

doi:10.13208/j.electrochem.160723

电化学（中英文） ›› 2017, Vol. 23 ›› Issue (5): 610-616. doi: 10.13208/j.electrochem.160723

纤维素微孔锂电隔膜的制备及性能研究

罗化峰*，乔元栋

山西大同大学煤炭工程学院矿业工程系, 山西大同 037003

收稿日期:2016-07-23 修回日期:2017-03-22 出版日期:2017-10-28 发布日期:2017-10-28
通讯作者: 罗化峰 E-mail:317306472@qq.com
基金资助:
大同市科技资助项目(201316)；山西省科技资助项目(20140321003-05)资助

Preparation and Characterization of Cellulose Acetate-based Separator for Lithium-ion batteries

LUO Hua-feng*, QIAO Yuan-dong

Coal Engineering College, Shanxi Datong University, Datong 037003, Shanxi, China

Received:2016-07-23 Revised:2017-03-22 Published:2017-10-28 Online:2017-10-28
Contact: LUO Hua-feng E-mail:317306472@qq.com

摘要/Abstract

摘要：

为了改善锂电隔膜的亲液性和耐高温性，以醋酸纤维素为成膜材料，利用相转化法制备了新型锂电隔膜，通过形貌和孔道结构表征、亲液性能和耐热性能测试对醋酸纤维素隔膜的基本性能进行研究，并将该隔膜装配成锂离子电池进行充放电性能测试. 结果表明，醋酸纤维素隔膜具有均匀的微孔结构，孔隙率达到65%，约为传统聚烯烃隔膜的1.5倍；纤维素材料的良好亲液性和高孔隙率结构改善了隔膜的吸液性能，其吸液率达到285%；该隔膜在150 ^oC、30 min的热处理条件下未发生明显的热收缩. 鉴于上述优点，相对于市售PE隔膜，醋酸纤维素隔膜所装配锂离子电池显示出更优的循环性能和倍率性能.

关键词: 隔膜, 相转化法, 醋酸纤维素, 亲液性, 耐热性, 电化学性能

Abstract: To improve the electrolyte wettability and thermal resistance of separators used for lithium-ion battery, a novel cellulose acetate (CA)-based separator is facilely prepared by non-solvent induced phase separation (NIPS) wet-process and investigated in lithium-ion batteries. Systematical investigations including morphological characterization, electrolyte wettability and thermal resistance testing were carried out. The results demonstrated that the CA-based separator exhibited well developed three-dimensional porous structures with porosity up to 65%, which is 1.5 times higher than that of PE separator. The CA separator also showed excellent electrolyte uptake (285%) and thermal stability at 150 ^oC for 30 min. Compared with the commercial PE separator, the CA separator exhibited better electrochemical performances, achieving superior discharge C-rate capability and cycling performance.

Key words: separator, phase inversion method, cellulose acetate, wettability, thermal resistance, electrochemistry performance

中图分类号:

TM912
O646

罗化峰，乔元栋. 纤维素微孔锂电隔膜的制备及性能研究[J]. 电化学（中英文）, 2017, 23(5): 610-616.

LUO Hua-feng, QIAO Yuan-dong. Preparation and Characterization of Cellulose Acetate-based Separator for Lithium-ion batteries[J]. Journal of Electrochemistry, 2017, 23(5): 610-616.

参考文献

[1] Arora P, Zhang Z M. Battery Separators [J]. Chem. Rev., 2004, 104(10): 4419-4462.

[2] Thackeray M M, Wolverton C, Isaacs C D. Electrical energy storage for transportation approaching the limits of, and going beyond, lithium-ion batteries [J]. Energy & Environmental Science, 2012, 5(1): 7854-7863.

[3] Wang C (王畅), Wu D Y (吴大勇). LIB separators and the recent technical progress [J]. Energy Storage Science and Technology (储能科学与技术), 2016, 5(2): 120-128.

[4] Bai L (白莉), Huai Y J (怀永建), et al. Characterization of the separator with thermal-shutdown layer for use in lithium batteries [J]. Journal of Electrochemistry (电化学), 2015,10(5): 459-464.

[5] Chen W J, Shi L Y, Wang Z Y, et al. Porous cellulose diacetate-SiO2 composite coating on polyethylene separator for high performance lithium-ion battery [J]. Carbohydrate Polymers, 2016, 147: 517–524.

[6]Xiao S Y, Yang Y Q, Li M X, et al. A composite membrane based on a biocompatible cellulose as a host of gel polymer electrolyte for lithium ion batteries [J]. J. Power Sources, 2014, 270: 53–58.

[7]Lee H, Yanilmaz M, Toprakci O, et al. A review of recent developments in membrane separators for rechargeable lithium-ion batteries [J]. Energy & Environmental Science, 2014, 7(12): 3857-3886.

[8] Xiao W, Zhao L N, Gong Y Q, et al. Preparation and performance of poly(vinyl alcohol) porous separator for lithium-ion batteries [J]. J. Membr. Sci., 2015, 487: 221-228.

[9] WooJ J , Nam S H, Seo S J, et al. A flame retarding separator with improved thermal stability for safe lithium-ion batteries [J]. Electrochemistry Communications, 2013, 35: 68-71.

[10] Ba C Y, Economy J. Preparation of PMDA/ODA polyimide membrane for use as substrate in a thermally stable composite reverse osmosis membrane [J]. Journal of Membrane Science, 2010, 363: 140-148.

[11] Ji W X (吉维肖), Wang F (王凤), Qian J F (钱江锋), et al. 3,4-ethylenedioxythiophene monomer as safety-enhancing additive for lithium ion batteries [J]. Journal of Electrochemistry (电化学), 2016, 22(3): 271-277.

[1]	杨云锐, 董欢欢, 郝志强, 何祥喜, 杨卓, 李林, 侴术雷. 高性能锂硫电池用钴/碳复合材料硫宿主[J]. 电化学（中英文）, 2023, 29(4): 2217003-.
[2]	王妍洁, 程宏宇, 侯冀岳, 杨文豪, 黄荣威, 倪志聪, 朱子翼, 王颖, 韦克毅, 张义永, 李雪. CoNi基双金属-有机骨架衍生碳复合材料多功能改性锂硫电池隔膜[J]. 电化学（中英文）, 2023, 29(3): 2217002-.
[3]	汪佳裕, 仝学锋, 彭启繁, 关越鹏, 王维坤, 王安邦, 刘乃强, 黄雅钦. 用纳米羟基磷灰石@多孔碳构建锂硫电池高效反应界面[J]. 电化学（中英文）, 2022, 28(11): 2219008-.
[4]	贠潇如, 陈宇方, 肖培涛, 郑春满. 关于水系锌离子电池中无氧钒基正极材料的综述[J]. 电化学（中英文）, 2022, 28(11): 2219004-.
[5]	周莉, 吴勰, 薛照明. 热塑性聚氨酯基聚合物电解质的制备与表征[J]. 电化学（中英文）, 2021, 27(4): 439-448.
[6]	梁振浪, 杨耀, 李豪, 刘丽英, 施志聪. 基于不同前驱体制备的硬碳负极材料的储锂性能[J]. 电化学（中英文）, 2021, 27(2): 177-184.
[7]	吴凯. Na₃V₂(PO₄)₂O₂F的合成及其在钠离子电池中的应用[J]. 电化学（中英文）, 2021, 27(1): 56-62.
[8]	魏壮壮, 张楠祥, 吴锋, 陈人杰. 锂硫电池多功能涂层隔膜的研究进展与展望[J]. 电化学（中英文）, 2020, 26(5): 716-730.
[9]	孙梦雷, 张达奇, 冯金奎, 倪江锋. 钒基电极材料研究进展[J]. 电化学（中英文）, 2019, 25(1): 45-54.
[10]	何大平，木士春. 质子交换膜燃料电池铂电催化剂稳定策略[J]. 电化学（中英文）, 2018, 24(6): 655-663.
[11]	王鸿辉，马明洁，冯婕，康黄雅，黄文杰. 钕掺杂二氧化铅复合阳极的电化学性能研究[J]. 电化学（中英文）, 2018, 24(4): 367-374.
[12]	张伶潇，赵惠慧，张丽娟，付予. Ag-TiO₂-MnO₂复合材料的制备与电化学性能研究[J]. 电化学（中英文）, 2018, 24(3): 292-299.
[13]	王友，曾一文，钟星，刘星，汤泉. 锂离子电池负极材料Li₃V₂(BO₃)₃/C 复合材料的合成及电化学性能研究[J]. 电化学（中英文）, 2018, 24(2): 174-181.
[14]	李全一，杨琪，赵艳红. 二氧化钼-碳复合涂层的电化学性能研究[J]. 电化学（中英文）, 2018, 24(2): 160-165.
[15]	刘兴亮，杨茂萍，汪伟伟, 曹勇. 分级过程对LiFePO₄/C电池性能的影响[J]. 电化学（中英文）, 2017, 23(6): 661-666.

纤维素微孔锂电隔膜的制备及性能研究

Preparation and Characterization of Cellulose Acetate-based Separator for Lithium-ion batteries

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics